mirror of
https://github.com/meshtastic/meshtastic.git
synced 2024-12-28 23:19:47 -08:00
443 lines
11 KiB
Markdown
443 lines
11 KiB
Markdown
---
|
|
id: rotary-encoder-module
|
|
title: Rotary Encoder
|
|
sidebar_label: Rotary Encoder
|
|
---
|
|
|
|
import Tabs from '@theme/Tabs';
|
|
import TabItem from '@theme/TabItem';
|
|
|
|
:::warning
|
|
GPIO access is fundamentally dangerous because invalid options can physically damage or destroy your hardware. Ensure that you fully understand the schematic for your particular device before trying this as we do not offer a warranty. Use at your own risk.
|
|
:::
|
|
|
|
<!--- TODO add link to hardware setup to admonition--->
|
|
|
|
:::note
|
|
This module requires attaching a peripheral accessory to your device. It will not work without one.
|
|
:::
|
|
|
|
## Overview
|
|
|
|
Meshtastic supports hardwired rotary encoders as input devices.
|
|
Currently, one rotary encoder (`rotary1`) is defined, but later more rotary encoders
|
|
can be added (if needed) the same way.
|
|
|
|
:::tip
|
|
Once module settings are changed, a **reset** is required for them to take effect.
|
|
:::
|
|
|
|
## Settings
|
|
|
|
| Setting | Acceptable Values | Default |
|
|
| :-----------------: | :---------------: | :-----------: |
|
|
| rotary1_enabled | `true`, `false` | `false` |
|
|
| rotary1_event_cw | `InputEventChar` | (not defined) |
|
|
| rotary1_event_ccw | `InputEventChar` | (not defined) |
|
|
| rotary1_event_press | `InputEventChar` | (not defined) |
|
|
| rotary1_pin_a | `integer` | (not defined) |
|
|
| rotary1_pin_b | `integer` | (not defined) |
|
|
| rotary1_pin_press | `integer` | (not defined) |
|
|
|
|
### rotary1_enabled
|
|
|
|
Enable the rotary encoder #1
|
|
|
|
#### Enable/Disable rotary1
|
|
|
|
<Tabs
|
|
groupId="settings"
|
|
defaultValue="cli"
|
|
values={[
|
|
{label: 'CLI', value: 'cli'},
|
|
{label: 'Android', value: 'android'},
|
|
{label: 'iOS', value: 'iOS'},
|
|
{label: 'Web', value: 'web'},
|
|
]}>
|
|
<TabItem value="cli">
|
|
|
|
```bash title="Enable rotary1"
|
|
meshtastic --set rotary1_enabled true
|
|
```
|
|
|
|
```bash title="Disable rotary1"
|
|
meshtastic --set rotary1_enabled true
|
|
```
|
|
|
|
</TabItem>
|
|
<TabItem value="android">
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="iOS">
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="web">
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
</Tabs>
|
|
|
|
### rotary1_event_cw
|
|
|
|
Generate input event on CW of this kind.
|
|
|
|
:::tip
|
|
For using with CannedMessageModule you must choose value `KEY_UP` here.
|
|
:::
|
|
|
|
#### Specify rotary1 event cw
|
|
|
|
<Tabs
|
|
groupId="settings"
|
|
defaultValue="cli"
|
|
values={[
|
|
{label: 'CLI', value: 'cli'},
|
|
{label: 'Android', value: 'android'},
|
|
{label: 'iOS', value: 'iOS'},
|
|
{label: 'Web', value: 'web'},
|
|
]}>
|
|
<TabItem value="cli">
|
|
|
|
```bash title="Set rotary1 event cw to 'KEY_UP'"
|
|
meshtastic --set rotary1_event_press KEY_UP
|
|
```
|
|
|
|
```bash title="Unset rotary1 event cw"
|
|
meshtastic --set rotary1_event_press ""
|
|
```
|
|
|
|
</TabItem>
|
|
<TabItem value="android">
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="iOS">
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="web">
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
</Tabs>
|
|
|
|
### rotary1_event_ccw
|
|
|
|
Generate input event on CCW of this kind.
|
|
|
|
:::tip
|
|
For using with CannedMessageModule you must choose value `KEY_DOWN` here.
|
|
:::
|
|
|
|
#### Specify rotary1 event ccw
|
|
|
|
<Tabs
|
|
groupId="settings"
|
|
defaultValue="cli"
|
|
values={[
|
|
{label: 'CLI', value: 'cli'},
|
|
{label: 'Android', value: 'android'},
|
|
{label: 'iOS', value: 'iOS'},
|
|
{label: 'Web', value: 'web'},
|
|
]}>
|
|
<TabItem value="cli">
|
|
|
|
```bash title="Set rotary1 event ccw to 'KEY_DOWN'"
|
|
meshtastic --set rotary1_event_ccw KEY_DOWN
|
|
```
|
|
|
|
```bash title="Unset rotary1 event ccw"
|
|
meshtastic --set rotary1_event_ccw ""
|
|
```
|
|
|
|
</TabItem>
|
|
<TabItem value="android">
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="iOS">
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="web">
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
</Tabs>
|
|
|
|
### rotary1_event_press
|
|
|
|
Generate input event on Press of this kind.
|
|
|
|
:::tip
|
|
For using with CannedMessageModule you must choose value `KEY_SELECT` here.
|
|
:::
|
|
|
|
#### Specify rotary1 event press
|
|
|
|
<Tabs
|
|
groupId="settings"
|
|
defaultValue="cli"
|
|
values={[
|
|
{label: 'CLI', value: 'cli'},
|
|
{label: 'Android', value: 'android'},
|
|
{label: 'iOS', value: 'iOS'},
|
|
{label: 'Web', value: 'web'},
|
|
]}>
|
|
<TabItem value="cli">
|
|
|
|
```bash title="Set rotary1 event press to 'KEY_SELECT'"
|
|
meshtastic --set rotary1_event_press KEY_SELECT
|
|
```
|
|
|
|
```bash title="Unset rotary1 event press"
|
|
meshtastic --set rotary1_event_press ""
|
|
```
|
|
|
|
</TabItem>
|
|
<TabItem value="android">
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="iOS">
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="web">
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
</Tabs>
|
|
|
|
### rotary1_pin_a
|
|
|
|
GPIO pin for rotary encoder A port.
|
|
|
|
:::caution
|
|
To prevent damaging your device, double check your device's schematics before attaching to the GPIO pins and setting this value.
|
|
:::
|
|
|
|
#### Specify rotary1 pin a
|
|
|
|
<Tabs
|
|
groupId="settings"
|
|
defaultValue="cli"
|
|
values={[
|
|
{label: 'CLI', value: 'cli'},
|
|
{label: 'Android', value: 'android'},
|
|
{label: 'iOS', value: 'iOS'},
|
|
{label: 'Web', value: 'web'},
|
|
]}>
|
|
<TabItem value="cli">
|
|
|
|
:::note
|
|
Replace `GPIO` below with the GPIO number from hardware setup.
|
|
:::
|
|
|
|
```bash title="Specify rotary1 pin a"
|
|
meshtastic --set rotary1_pin_a GPIO
|
|
```
|
|
|
|
</TabItem>
|
|
<TabItem value="android">
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="iOS">
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="web">
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
</Tabs>
|
|
|
|
### rotary1_pin_b
|
|
|
|
GPIO pin for rotary encoder B port.
|
|
|
|
:::caution
|
|
To prevent damaging your device, double check your device's schematics before attaching to the GPIO pins and setting this value.
|
|
:::
|
|
|
|
#### Specify rotary1 pin b
|
|
|
|
<Tabs
|
|
groupId="settings"
|
|
defaultValue="cli"
|
|
values={[
|
|
{label: 'CLI', value: 'cli'},
|
|
{label: 'Android', value: 'android'},
|
|
{label: 'iOS', value: 'iOS'},
|
|
{label: 'Web', value: 'web'},
|
|
]}>
|
|
<TabItem value="cli">
|
|
|
|
:::note
|
|
Replace `GPIO` below with the GPIO number from hardware setup.
|
|
:::
|
|
|
|
```bash title="Specify rotary1 pin b"
|
|
meshtastic --set rotary1_pin_b GPIO
|
|
```
|
|
|
|
</TabItem>
|
|
<TabItem value="android">
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="iOS">
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="web">
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
</Tabs>
|
|
|
|
### rotary1_pin_press
|
|
|
|
GPIO pin for rotary encoder Press port.
|
|
|
|
:::caution
|
|
To prevent damaging your device, double check your device's schematics before attaching to the GPIO pins and setting this value.
|
|
:::
|
|
|
|
#### Specify rotary1 pin press
|
|
|
|
<Tabs
|
|
groupId="settings"
|
|
defaultValue="cli"
|
|
values={[
|
|
{label: 'CLI', value: 'cli'},
|
|
{label: 'Android', value: 'android'},
|
|
{label: 'iOS', value: 'iOS'},
|
|
{label: 'Web', value: 'web'},
|
|
]}>
|
|
<TabItem value="cli">
|
|
|
|
:::note
|
|
Replace `GPIO` below with the GPIO number from hardware setup.
|
|
:::
|
|
|
|
```bash title="Specify rotary1 pin press"
|
|
meshtastic --set rotary1_pin_press GPIO
|
|
```
|
|
|
|
</TabItem>
|
|
<TabItem value="android">
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="iOS">
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="web">
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
</Tabs>
|
|
|
|
## Details
|
|
|
|
<!--- TODO add link to hardware page --->
|
|
|
|
Configuring the rotary encoder module require attaching the compatible hardware.
|
|
|
|
## Examples
|
|
|
|
### Configure rotary encoder for Canned Message Module
|
|
|
|
<Tabs
|
|
groupId="settings"
|
|
defaultValue="cli"
|
|
values={[
|
|
{label: 'CLI', value: 'cli'},
|
|
{label: 'Android', value: 'android'},
|
|
{label: 'iOS', value: 'iOS'},
|
|
{label: 'Web', value: 'web'},
|
|
]}>
|
|
<TabItem value="cli">
|
|
|
|
:::note
|
|
Replace each `GPIO` (x3) below with the GPIO numbers from hardware setup.
|
|
:::
|
|
|
|
```bash title="Canned Message Module - Required Rotary Encoder Module Settings"
|
|
meshtastic --set rotary1_pin_a GPIO
|
|
meshtastic --set rotary1_pin_b GPIO
|
|
meshtastic --set rotary1_pin_press GPIO
|
|
meshtastic --set rotary1_event_cw KEY_UP
|
|
meshtastic --set rotary1_event_ccw KEY_DOWN
|
|
meshtastic --set rotary1_event_press KEY_SELECT
|
|
meshtastic --set rotary1_enabled True
|
|
```
|
|
|
|
</TabItem>
|
|
<TabItem value="android">
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="iOS">
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="web">
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
</Tabs>
|