mirror of
https://github.com/meshtastic/meshtastic.git
synced 2024-11-16 02:24:15 -08:00
432 lines
12 KiB
Markdown
432 lines
12 KiB
Markdown
---
|
|
id: environmental-measurement-plugin
|
|
title: Environmental Measurement Plugin Settings
|
|
sidebar_label: Environmental Measurement Plugin
|
|
---
|
|
import Tabs from '@theme/Tabs';
|
|
import TabItem from '@theme/TabItem';
|
|
|
|
:::warning
|
|
GPIO access is fundamentally dangerous because invalid options can physically damage or destroy your hardware. Ensure that you fully understand the schematic for your particular device before trying this as we do not offer a warranty. Use at your own risk.
|
|
:::
|
|
|
|
<!--- TODO add link to hardware setup to admonition--->
|
|
:::note
|
|
This plugin requires attaching a peripheral accessory to your device. It will not work without one.
|
|
:::
|
|
|
|
## Overview
|
|
|
|
The Environment Measurement Plugin will allow nodes to send a specific message with information from connected environmental sensors. Currently supported sensors are BME280, BME680, DHT11, DHT12, DHT21, DHT22 and Dallas 1-wire DS18B20.
|
|
|
|
:::tip
|
|
Once plugin settings are changed, a **reset** is required for them to take effect.
|
|
:::
|
|
|
|
## Settings
|
|
|
|
| Setting | Acceptable Values | Default |
|
|
| :-----: | :---------------: | :-----: |
|
|
| environmental_measurement_plugin_display_farenheit | `true`, `false` | `false` |
|
|
| environmental_measurement_plugin_measurement_enabled | `true`, `false` | `false` |
|
|
| environmental_measurement_plugin_read_error_count_threshold | `integer` | `0` |
|
|
| environmental_measurement_plugin_recovery_interval | `integer` (seconds) | `0` |
|
|
| environmental_measurement_plugin_screen_enabled | `true`, `false` | `0` |
|
|
| environmental_measurement_plugin_sensor_pin | `integer` | `0` |
|
|
| environmental_measurement_plugin_sensor_type | `0-6` | `0` |
|
|
| environmental_measurement_plugin_update_interval | `integer` (seconds) | `0` |
|
|
|
|
### environmental_measurement_plugin_display_farenheit
|
|
|
|
The sensor is always read in Celsius, but the user can opt to view the temperature display in Fahrenheit using this setting.
|
|
|
|
#### Display Farenheit/Celsius
|
|
<Tabs
|
|
groupId="settings"
|
|
defaultValue="cli"
|
|
values={[
|
|
{label: 'CLI', value: 'cli'},
|
|
{label: 'Android', value: 'android'},
|
|
{label: 'iOS', value: 'iOS'},
|
|
{label: 'Web', value: 'web'},
|
|
]}>
|
|
<TabItem value="cli">
|
|
|
|
```bash title="Display Farenheit"
|
|
meshtastic --set environmental_measurement_plugin_display_farenheit true
|
|
```
|
|
```bash title="Display Celsius"
|
|
meshtastic --set environmental_measurement_plugin_display_farenheit false
|
|
```
|
|
|
|
</TabItem>
|
|
<TabItem value="android">
|
|
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="iOS">
|
|
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="web">
|
|
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
</Tabs>
|
|
|
|
### environmental_measurement_plugin_measurement_enabled
|
|
|
|
Enables the plugin.
|
|
|
|
#### Enable/Disable the plugin
|
|
<Tabs
|
|
groupId="settings"
|
|
defaultValue="cli"
|
|
values={[
|
|
{label: 'CLI', value: 'cli'},
|
|
{label: 'Android', value: 'android'},
|
|
{label: 'iOS', value: 'iOS'},
|
|
{label: 'Web', value: 'web'},
|
|
]}>
|
|
<TabItem value="cli">
|
|
|
|
```bash title="Enable Plugin"
|
|
meshtastic --set environmental_measurement_plugin_measurement_enabled true
|
|
```
|
|
```bash title="Disable Plugin"
|
|
meshtastic --set environmental_measurement_plugin_measurement_enabled false
|
|
```
|
|
</TabItem>
|
|
<TabItem value="android">
|
|
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="iOS">
|
|
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="web">
|
|
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
</Tabs>
|
|
|
|
### environmental_measurement_plugin_read_error_count_threshold
|
|
|
|
Sometimes sensor reads can fail. If this happens, we will retry a configurable number of attempts. Each attempt will be delayed by the minimum required refresh rate for that sensor
|
|
|
|
#### Configure environmental_measurement_plugin_read_error_count_threshold
|
|
<Tabs
|
|
groupId="settings"
|
|
defaultValue="cli"
|
|
values={[
|
|
{label: 'CLI', value: 'cli'},
|
|
{label: 'Android', value: 'android'},
|
|
{label: 'iOS', value: 'iOS'},
|
|
{label: 'Web', value: 'web'},
|
|
]}>
|
|
<TabItem value="cli">
|
|
|
|
```bash title="Configure environmental_measurement_plugin_read_error_count_threshold to 3 tries"
|
|
meshtastic --set environmental_measurement_plugin_read_error_count_threshold 3
|
|
```
|
|
</TabItem>
|
|
<TabItem value="android">
|
|
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="iOS">
|
|
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="web">
|
|
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
</Tabs>
|
|
|
|
### environmental_measurement_plugin_recovery_interval
|
|
|
|
Sometimes we can end up with more than read_error_count_threshold failures. In this case, we will stop trying to read from the sensor for a while. Wait this long until trying to read from the sensor again.
|
|
|
|
#### Configure environmental_measurement_plugin_recovery_interval
|
|
<Tabs
|
|
groupId="settings"
|
|
defaultValue="cli"
|
|
values={[
|
|
{label: 'CLI', value: 'cli'},
|
|
{label: 'Android', value: 'android'},
|
|
{label: 'iOS', value: 'iOS'},
|
|
{label: 'Web', value: 'web'},
|
|
]}>
|
|
<TabItem value="cli">
|
|
|
|
```bash title="Configure environmental_measurement_plugin_recovery_interval to 120 seconds"
|
|
meshtastic --set environmental_measurement_plugin_recovery_interval 120
|
|
```
|
|
</TabItem>
|
|
<TabItem value="android">
|
|
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="iOS">
|
|
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="web">
|
|
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
</Tabs>
|
|
|
|
### environmental_measurement_plugin_screen_enabled
|
|
|
|
Enable/Disable the environmental measurement plugin on-device display.
|
|
|
|
#### Enable/Disable the plugin on device screen
|
|
<Tabs
|
|
groupId="settings"
|
|
defaultValue="cli"
|
|
values={[
|
|
{label: 'CLI', value: 'cli'},
|
|
{label: 'Android', value: 'android'},
|
|
{label: 'iOS', value: 'iOS'},
|
|
{label: 'Web', value: 'web'},
|
|
]}>
|
|
<TabItem value="cli">
|
|
|
|
```bash title="Enable on device screen"
|
|
meshtastic --set environmental_measurement_plugin_screen_enabled true
|
|
```
|
|
```bash title="Disable on device screen"
|
|
meshtastic --set environmental_measurement_plugin_screen_enabled false
|
|
```
|
|
</TabItem>
|
|
<TabItem value="android">
|
|
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="iOS">
|
|
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="web">
|
|
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
</Tabs>
|
|
|
|
### environmental_measurement_plugin_sensor_pin
|
|
|
|
:::note
|
|
The preferred setup is using I2C, so the `environmental_measurement_plugin_sensor_pin` may not be needed.
|
|
:::
|
|
|
|
Specify the preferred GPIO Pin for sensor readings. May not be needed if using I2C.
|
|
|
|
:::caution
|
|
To prevent damaging your device, double check your device's schematics before attaching to the GPIO pins and setting this value.
|
|
:::
|
|
|
|
#### Set plugin sensor pin
|
|
<Tabs
|
|
groupId="settings"
|
|
defaultValue="cli"
|
|
values={[
|
|
{label: 'CLI', value: 'cli'},
|
|
{label: 'Android', value: 'android'},
|
|
{label: 'iOS', value: 'iOS'},
|
|
{label: 'Web', value: 'web'},
|
|
]}>
|
|
<TabItem value="cli">
|
|
|
|
```bash title="Set plugin sensor pin"
|
|
meshtastic --set environmental_measurement_plugin_sensor_pin PINNUMBER
|
|
```
|
|
|
|
</TabItem>
|
|
<TabItem value="android">
|
|
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="iOS">
|
|
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="web">
|
|
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
</Tabs>
|
|
|
|
### environmental_measurement_plugin_sensor_type
|
|
|
|
Specify the sensor type.
|
|
|
|
| Value | Description | Sensor Features |
|
|
| :---: | :---------: | :-------------: |
|
|
| `0` | DHT11 | Temperature, Humidity |
|
|
| `1` | DS18B20 (Dallas 1-wire) | Temperature |
|
|
| `2` | DHT12 | Temperature, Humidity |
|
|
| `3` | DHT21 | Temperature, Humidity |
|
|
| `4` | DHT22 | Temperature, Humidity |
|
|
| `5` | BME280 | Temperature, Humidity, Pressure |
|
|
| `6` | BME680 | Temperature, Humidity, Pressure, VOC Gas |
|
|
| `7` | MCP9808 | Precision Temperature |
|
|
|
|
#### Set sensor type
|
|
|
|
<Tabs
|
|
groupId="settings"
|
|
defaultValue="cli"
|
|
values={[
|
|
{label: 'CLI', value: 'cli'},
|
|
{label: 'Android', value: 'android'},
|
|
{label: 'iOS', value: 'iOS'},
|
|
{label: 'Web', value: 'web'},
|
|
]}>
|
|
<TabItem value="cli">
|
|
|
|
:::note
|
|
The CLI is able to take the `value` or the `name` of the sensor from the table above.
|
|
:::
|
|
|
|
```bash title="Set sensor type to DS18B20"
|
|
meshtastic --set environmental_measurement_plugin_sensor_type 1
|
|
```
|
|
```bash title="Set sensor type to DS18B20"
|
|
meshtastic --set environmental_measurement_plugin_sensor_type DS18B20
|
|
```
|
|
|
|
</TabItem>
|
|
<TabItem value="android">
|
|
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="iOS">
|
|
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="web">
|
|
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
</Tabs>
|
|
|
|
### environmental_measurement_plugin_update_interval
|
|
|
|
Interval in seconds of how often we should try to send our measurements to the mesh.
|
|
|
|
#### Set plugin update interval
|
|
<Tabs
|
|
groupId="settings"
|
|
defaultValue="cli"
|
|
values={[
|
|
{label: 'CLI', value: 'cli'},
|
|
{label: 'Android', value: 'android'},
|
|
{label: 'iOS', value: 'iOS'},
|
|
{label: 'Web', value: 'web'},
|
|
]}>
|
|
<TabItem value="cli">
|
|
|
|
```bash title="Set plugin update interval to 15 seconds"
|
|
meshtastic --set environmental_measurement_plugin_update_interval 15
|
|
```
|
|
|
|
</TabItem>
|
|
<TabItem value="android">
|
|
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="iOS">
|
|
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="web">
|
|
|
|
:::info
|
|
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
|
|
:::
|
|
|
|
</TabItem>
|
|
</Tabs>
|
|
|
|
## Details
|
|
|
|
### Hardware
|
|
|
|
The sensors can be wired differently, here's [one example](https://randomnerdtutorials.com/esp32-ds18b20-temperature-arduino-ide) for sensor DS18B20.
|
|
|
|
### Known Problems
|
|
|
|
* No default configuration values are currently set, so this must be done when enabling the plugin.
|