mirror of
https://github.com/meshtastic/meshtastic.git
synced 2024-11-14 01:24:14 -08:00
68 lines
2.8 KiB
Markdown
68 lines
2.8 KiB
Markdown
---
|
||
id: web-config-software
|
||
title: Initial configuration
|
||
sidebar_label: Configuration
|
||
---
|
||
|
||
## Manual Installation
|
||
|
||
Pre-requisite: You have Meshtastic Device firmware between version 1.0.32 - 1.1.50. A client for version 1.2.x will be released shortly and the documentation will be updated accordingly.
|
||
|
||
We do realize this installation method is not "easy" and are exploring ways to simplify this in the future, ideally rolling it out as part of the device firmware.
|
||
|
||
Once you have your device loaded with the Meshtastic Device firmware you need to connect to it's wifi and then manually upload the web interface files.
|
||
|
||
### Connect to device wifi
|
||
|
||
The easiest way to turn on the device wifi is to do the following after the device has been powered on:
|
||
|
||
* Hold down the user button
|
||
* Press and release the reset button
|
||
* Count to 2
|
||
* Let go of the user button
|
||
|
||
:::note
|
||
Some devices call this the “prog” button. On devices with two buttons where one is a reset button — it’s usually the other one. On T-beam devices it is the middle button.
|
||
:::
|
||
|
||
The device will now go into WiFi SoftAP Admin Mode. In this mode, your device will broadcast the following credentials on a built in Access Point:
|
||
|
||
* SSID: meshtasticAdmin
|
||
* Password: 12345678
|
||
|
||
:::note
|
||
The first time your device restarts after enabling WiFi, it will take an additional 20-30 seconds to boot. This is to generate self-signed SSL keys. The keys will be saved for future reuse.
|
||
:::
|
||
|
||
### Upload web interface files
|
||
|
||
* Updated (Nov 20, 2021) - The process to use the web interface will soon be included in the default builds downloaded from the usual places. This document will be updated soon. Hang tight :)
|
||
|
||
### Wifi configuration
|
||
|
||
To enable the WiFi to access the web interface, you must at minimum set two preferences:
|
||
|
||
`wifi_ssid`
|
||
`wifi_password`
|
||
|
||
For the wifi features to be enabled, those two properties must be set.
|
||
|
||
To turn it off, either of preference must be set as an empty string, that is a pair of double quotes each:
|
||
|
||
`wifi_ssid ""`
|
||
`wifi_password ""`
|
||
|
||
Alternatively, you can enable the internal Soft Access Point:
|
||
|
||
`wifi_ap_mode true`
|
||
|
||
With that enabled, we will broadcast a new wifi network with the SSID and password you set. In AP mode, your device will act as a Captive Portal with a built in DNS server that resolves all name requests back to the device. Additionally, Apple Captive Portal Assistant is implemented -- if you're on an Apple device, the web interface will pop up automagically.
|
||
|
||
To turn it off, simply reboot the device.
|
||
|
||
Right now, the only way to set those preference is through the Meshtastic-python command line tool. At some point, we will be able to configure this from your mobile phone over Bluetooth.
|
||
|
||
:::note
|
||
The first time your device restarts after enabling WiFi, it will take an additional 20-30 seconds to boot. This is to generate self-signed SSL keys. The keys will be saved for future reuse.
|
||
:::
|