9.6 KiB
| id | title | sidebar_label |
|---|---|---|
| flashing-firmware | Flashing Firmware | Flashing Firmware |
import Tabs from '@theme/Tabs'; import TabItem from '@theme/TabItem';
Prerequisites
Check Data Cable
<Tabs groupId="operating-system" defaultValue="linux" values={[ {label: 'Linux', value: 'linux'}, {label: 'macOS', value: 'macos'}, {label: 'Windows', value: 'windows'}, ]}>
To check if you have a data cable that will work, plug your device into the computer and then navigate to Terminal and enter the following command:
lsusb
you should see something like CP210X USB to UART Bridge Controller.
:::note You may need to install a driver from Silicon Labs for the CP210X USB to UART bridge :::
To check if you have a data cable that will work, plug your device into the computer and then navigate to Apple Menu > About This Mac > System Report... > Hardware > USB you should see something like CP210X USB to UART Bridge Controller.
:::note You may need to install a driver from Silicon Labs for the CP210X USB to UART bridge :::
To check if you have a data cable that will work, plug your device into the computer and navigate to Device Manager > Ports and ensure the device is shown. You should see something like CP210X USB to UART Bridge Controller.
If your device is showing up under Device Manager > Ports > Other Devices you need to install the driver from Silicon Labs for the CP210X USB to UART bridge
:::note You may need to install a driver from Silicon Labs for the CP210X USB to UART bridge :::
Download Latest Firmware
Prebuilt binaries for the supported radios are available in our releases. Your initial installation has to happen over USB from your Mac, Windows or Linux PC. Once our software is installed, all future software updates happen over bluetooth from your phone.
| Current Firmware | List of Firmware Versions |
|---|
Command Line Interface Instructions
Install Prerequisite Software
<Tabs groupId="operating-system" defaultValue="linux" values={[ {label: 'Linux', value: 'linux'}, {label: 'macOS', value: 'macos'}, {label: 'Windows', value: 'windows'}, ]}>
Check if you have python3 and pip installed with the following command
python3 --version
pip3 --version
If python3 is not installed, install with
sudo apt-get update
sudo apt-get install python3.6
If pip is not installed, install with
sudo apt-get install python3-pip
OS X comes with Python 2.7 installed, but not pip. The following uses Homebrew to install python3 which includes pip3. On MacOS you will use pip3 instead of pip.
:::note Check if you have Homebrew installed with the following command
brew -v
If it's not installed, follow the instructions on the Homebrew website before continuing. :::
- Download and install Python. When installing, make sure to click
Add Python X.Y to PATH. - Download and install Gitbash (or other appropriate shell) and run all subsequent commands from that shell.
:::note
Confirm installation of python & pip with the following commands.
py --version
pip --version
:::
Install esptool
<Tabs groupId="operating-system" defaultValue="linux" values={[ {label: 'Linux', value: 'linux'}, {label: 'macOS', value: 'macos'}, {label: 'Windows', value: 'windows'}, ]}>
pip install --upgrade esptool
pip3 install --upgrade esptool
pip install --upgrade esptool
Confirm Communication With Chip
Connect the radio to your computer using a data USB cable. Confirm your device is talking to your computer using the following command:
esptool.py chip_id
# You should see a result similar to this:
mydir$ esptool.py chip_id
esptool.py v2.6
Found 2 serial ports
Serial port /dev/ttyUSB0
Connecting....
Detecting chip type... ESP32
Chip is ESP32D0WDQ6 (revision 1)
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
MAC: 24:6f:28:b5:36:71
Uploading stub...
Running stub...
Stub running...
Warning: ESP32 has no Chip ID. Reading MAC instead.
MAC: 24:6f:28:b5:36:71
Hard resetting via RTS pin...
Navigate to Firmware
cd into the directory where you unzipped the latest release. For example:
cd /Downloads/firmware/
Install/Update Firmware
:::caution Be very careful to install the correct load for your board. In particular the popular 'T-BEAM' radio from TTGO is not called 'TTGO-Lora' (that is a different board). So don't install the 'TTGO-Lora' build on a TBEAM, it won't work correctly. :::
Install Firmware
Install the correct firmware for your board using the following command. Be sure to select the correct board and frequency.
./device-install.sh -f firmware-BOARD-VERSION.bin
./device-install.sh -f firmware-heltec-EU865-1.2.0.bin
Update Firmware
To update a the firmware on an existing Meshtastic device use the following command. Be sure to select the correct board and frequency.
./device-update.sh -f firmware-BOARD-VERSION.bin
./device-update.sh -f firmware-heltec-EU865-1.2.0.bin
Graphical User Interface Instructions
Download ESPHome Flasher
:::note
ESPHome Flasher also provides instructions to build from source or install via pip on their README.
:::
<Tabs groupId="operating-system" defaultValue="linux" values={[ {label: 'Linux', value: 'linux'}, {label: 'macOS', value: 'macos'}, {label: 'Windows', value: 'windows'}, ]}>
| ESPHome Flasher |
|---|
:::note ESPHome Flasher for linux is a prebuilt binary for Ubuntu. These instructions were only tested on Ubuntu. Mileage may very on other distros. :::
| ESPHome Flasher |
|---|
| ESPHome Flasher |
|---|
Open ESPHome Flasher
<Tabs groupId="operating-system" defaultValue="linux" values={[ {label: 'Linux', value: 'linux'}, {label: 'macOS', value: 'macos'}, {label: 'Windows', value: 'windows'}, ]}>
There should be no installation required. Connect your device using a data USB cable and refresh the Serial Port. Select the port that your device is connected to.
There should be no installation required. Connect your device using a data USB cable and refresh the Serial Port. Select the port that your device is connected to.
:::note
If you get an error saying The application "ESPHome-Flasher.app" can't be opened it is likely a permissions issue. See here for instructions.
:::
:::note
If you get an error saying "ESPHome-Flasher.app" cannot be opened because the developer cannot be verified, click cancel. Right click on the application and select Open. Select Open on the confirmation alert.
:::
There should be no installation required. Connect your device using a data USB cable and refresh the Serial Port. Select the port that your device is connected to.
:::note
If your device is not showing under Serial Port you may need to install the drivers for the CP210X USB to UART bridge.
:::
Select Firmware
Browse to the previously downloaded firmware and select the correct firmware based on the board type and frequency.
:::caution Be very careful to install the correct load for your board. In particular the popular 'T-BEAM' radio from TTGO is not called 'TTGO-Lora' (that is a different board). So don't install the 'TTGO-Lora' build on a TBEAM, it won't work correctly. :::
Flash Firmware
Select Flash ESP. It may take a minute or two. Once complete, "Done! Flashing is complete!" will be shown.
Over the Air Update Instructions
OTA updates are only currently available on Android.