meshtastic/website/docs/software/settings/power.md

id	title	sidebar_label
power	Power Settings	Power

import Tabs from '@theme/Tabs'; import TabItem from '@theme/TabItem';

Overview

Settings

Setting	Acceptable Values	Default
charge_current	MAUnset, MA100, MA190, MA280, MA360, MA450, MA550, MA630, MA700, MA780, MA880, MA960, MA1000, MA1080, MA1160, MA1240, MA1320:	MAUnset
is_low_power	true, false	false
is_router	true, false	false
ls_secs	integer (seconds)	0 (see note)
mesh_sds_timeout_secs	integer (seconds)	0
min_wake_secs	integer (seconds)	0
phone_sds_timeout_sec	integer (seconds)	0
phone_timeout_secs	integer (seconds)	0
screen_on_secs	integer (seconds)	0
sds_secs	integer (seconds)	0
send_owner_interval	integer (seconds)	4
wait_bluetooth_secs	integer (seconds)	0

:::note When you the following settings to 0 they assume the following defaults:

• ls_secs: 1 hour
• mesh_sds_timeout_secs: 2 hours
• min_wake_secs: 10 seconds
• phone_sds_timeout_sec: 2 hours
• phone_timeout_secs: 15 minutes
• screen_on_secs: 1 minute
• sds_secs: 1 year
• wait_bluetooth_secs: 1 minute :::

charge_current

Sets the current of the battery charger

is_low_power

If set, we are powered from a low-current source (i.e. solar), so even if it looks like we have power flowing in we should try to minimize power consumption as much as possible. YOU DO NOT NEED TO SET THIS IF YOU'VE set is_router (it is implied in that case).

is_router

Are we operating as a router. Changes behavior in the following ways: The device will only sleep for critically low battery level (i.e. always tries to stay alive for the mesh) In the future routing decisions will preferentially route packets through nodes with this attribute (because assumed good line of sight)

ls_secs

Power management state machine option. See the power page for details. 0 for default of 3600

mesh_sds_timeout_secs

Power management state machine option. See the power page for details. 0 for default of two hours, MAXUINT for disabled

min_wake_secs

Power management state machine option. See the power pagefor details. 0 for default of 10 seconds

phone_sds_timeout_sec

Power management state machine option. See the power page for details. 0 for default of two hours, MAXUINT for disabled

phone_timeout_secs

Power management state machine option. See the power page for details. 0 for default of 15 minutes

screen_on_secs

Power management state machine option. See the power page for details. 0 for default of one minute.

sds_secs

Power management state machine option. See the power page for details. 0 for default of one year

send_owner_interval

Send our owner info at least this often (also we always send once at boot - to rejoin the mesh)

wait_bluetooth_secs

Power management state machine option. See the power page for details. 0 for default of 1 minute

Details

Examples

<Tabs groupId="settings" defaultValue="cli" values={[ {label: 'CLI', value: 'cli'}, {label: 'Android', value: 'android'}, ]}>

TODO

TODO