prometheus/storage/remote/queue_manager.go

893 lines
28 KiB
Go
Raw Normal View History

2017-05-10 02:44:13 -07:00
// Copyright 2013 The Prometheus Authors
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package remote
import (
"context"
2017-05-10 02:44:13 -07:00
"math"
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
"strconv"
2017-05-10 02:44:13 -07:00
"sync"
"sync/atomic"
2017-05-10 02:44:13 -07:00
"time"
2017-08-11 11:45:52 -07:00
"github.com/go-kit/kit/log"
"github.com/go-kit/kit/log/level"
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
"github.com/gogo/protobuf/proto"
"github.com/golang/snappy"
2017-05-10 02:44:13 -07:00
"github.com/prometheus/client_golang/prometheus"
"github.com/prometheus/client_golang/prometheus/promauto"
2017-05-10 02:44:13 -07:00
"github.com/prometheus/prometheus/config"
"github.com/prometheus/prometheus/pkg/labels"
"github.com/prometheus/prometheus/pkg/relabel"
2017-10-23 13:28:17 -07:00
"github.com/prometheus/prometheus/prompb"
"github.com/prometheus/prometheus/tsdb/record"
"github.com/prometheus/prometheus/tsdb/wal"
2017-05-10 02:44:13 -07:00
)
const (
// We track samples in/out and how long pushes take using an Exponentially
// Weighted Moving Average.
ewmaWeight = 0.2
shardUpdateDuration = 10 * time.Second
// Allow 30% too many shards before scaling down.
shardToleranceFraction = 0.3
)
var (
succeededSamplesTotal = promauto.NewCounterVec(
2017-05-10 02:44:13 -07:00
prometheus.CounterOpts{
Namespace: namespace,
Subsystem: subsystem,
Name: "succeeded_samples_total",
Help: "Total number of samples successfully sent to remote storage.",
},
[]string{remoteName, endpoint},
2017-05-10 02:44:13 -07:00
)
failedSamplesTotal = promauto.NewCounterVec(
2017-05-10 02:44:13 -07:00
prometheus.CounterOpts{
Namespace: namespace,
Subsystem: subsystem,
Name: "failed_samples_total",
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
Help: "Total number of samples which failed on send to remote storage, non-recoverable errors.",
},
[]string{remoteName, endpoint},
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
)
retriedSamplesTotal = promauto.NewCounterVec(
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
prometheus.CounterOpts{
Namespace: namespace,
Subsystem: subsystem,
Name: "retried_samples_total",
Help: "Total number of samples which failed on send to remote storage but were retried because the send error was recoverable.",
2017-05-10 02:44:13 -07:00
},
[]string{remoteName, endpoint},
2017-05-10 02:44:13 -07:00
)
droppedSamplesTotal = promauto.NewCounterVec(
2017-05-10 02:44:13 -07:00
prometheus.CounterOpts{
Namespace: namespace,
Subsystem: subsystem,
Name: "dropped_samples_total",
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
Help: "Total number of samples which were dropped after being read from the WAL before being sent via remote write.",
},
[]string{remoteName, endpoint},
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
)
enqueueRetriesTotal = promauto.NewCounterVec(
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
prometheus.CounterOpts{
Namespace: namespace,
Subsystem: subsystem,
Name: "enqueue_retries_total",
Help: "Total number of times enqueue has failed because a shards queue was full.",
2017-05-10 02:44:13 -07:00
},
[]string{remoteName, endpoint},
2017-05-10 02:44:13 -07:00
)
sentBatchDuration = promauto.NewHistogramVec(
2017-05-10 02:44:13 -07:00
prometheus.HistogramOpts{
Namespace: namespace,
Subsystem: subsystem,
Name: "sent_batch_duration_seconds",
Help: "Duration of sample batch send calls to the remote storage.",
Buckets: prometheus.DefBuckets,
},
[]string{remoteName, endpoint},
2017-05-10 02:44:13 -07:00
)
queueHighestSentTimestamp = promauto.NewGaugeVec(
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
prometheus.GaugeOpts{
Namespace: namespace,
Subsystem: subsystem,
Name: "queue_highest_sent_timestamp_seconds",
Help: "Timestamp from a WAL sample, the highest timestamp successfully sent by this queue, in seconds since epoch.",
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
},
[]string{remoteName, endpoint},
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
)
queuePendingSamples = promauto.NewGaugeVec(
2017-05-10 02:44:13 -07:00
prometheus.GaugeOpts{
Namespace: namespace,
Subsystem: subsystem,
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
Name: "pending_samples",
Help: "The number of samples pending in the queues shards to be sent to the remote storage.",
2017-05-10 02:44:13 -07:00
},
[]string{remoteName, endpoint},
2017-05-10 02:44:13 -07:00
)
shardCapacity = promauto.NewGaugeVec(
2017-05-10 02:44:13 -07:00
prometheus.GaugeOpts{
Namespace: namespace,
Subsystem: subsystem,
Name: "shard_capacity",
Help: "The capacity of each shard of the queue used for parallel sending to the remote storage.",
2017-05-10 02:44:13 -07:00
},
[]string{remoteName, endpoint},
2017-05-10 02:44:13 -07:00
)
numShards = promauto.NewGaugeVec(
2017-05-10 02:44:13 -07:00
prometheus.GaugeOpts{
Namespace: namespace,
Subsystem: subsystem,
Name: "shards",
Help: "The number of shards used for parallel sending to the remote storage.",
},
[]string{remoteName, endpoint},
2017-05-10 02:44:13 -07:00
)
maxNumShards = promauto.NewGaugeVec(
prometheus.GaugeOpts{
Namespace: namespace,
Subsystem: subsystem,
Name: "shards_max",
Help: "The maximum number of shards that the queue is allowed to run.",
},
[]string{remoteName, endpoint},
)
minNumShards = promauto.NewGaugeVec(
prometheus.GaugeOpts{
Namespace: namespace,
Subsystem: subsystem,
Name: "shards_min",
Help: "The minimum number of shards that the queue is allowed to run.",
},
[]string{remoteName, endpoint},
)
desiredNumShards = promauto.NewGaugeVec(
prometheus.GaugeOpts{
Namespace: namespace,
Subsystem: subsystem,
Name: "shards_desired",
Help: "The number of shards that the queues shard calculation wants to run based on the rate of samples in vs. samples out.",
},
[]string{remoteName, endpoint},
)
bytesSent = promauto.NewCounterVec(
prometheus.CounterOpts{
Namespace: namespace,
Subsystem: subsystem,
Name: "sent_bytes_total",
Help: "The total number of bytes sent by the queue.",
},
[]string{remoteName, endpoint},
)
2017-05-10 02:44:13 -07:00
)
// StorageClient defines an interface for sending a batch of samples to an
// external timeseries database.
type StorageClient interface {
// Store stores the given samples in the remote storage.
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
Store(context.Context, []byte) error
// Name uniquely identifies the remote storage.
2017-05-10 02:44:13 -07:00
Name() string
// Endpoint is the remote read or write endpoint for the storage client.
Endpoint() string
2017-05-10 02:44:13 -07:00
}
// QueueManager manages a queue of samples to be sent to the Storage
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
// indicated by the provided StorageClient. Implements writeTo interface
// used by WAL Watcher.
2017-05-10 02:44:13 -07:00
type QueueManager struct {
// https://golang.org/pkg/sync/atomic/#pkg-note-BUG
lastSendTimestamp int64
logger log.Logger
flushDeadline time.Duration
cfg config.QueueConfig
externalLabels labels.Labels
relabelConfigs []*relabel.Config
client StorageClient
watcher *wal.Watcher
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
seriesMtx sync.Mutex
seriesLabels map[uint64]labels.Labels
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
seriesSegmentIndexes map[uint64]int
droppedSeries map[uint64]struct{}
2017-05-10 02:44:13 -07:00
shards *shards
numShards int
reshardChan chan int
quit chan struct{}
wg sync.WaitGroup
2017-05-10 02:44:13 -07:00
samplesIn, samplesDropped, samplesOut, samplesOutDuration *ewmaRate
integralAccumulator float64
startedAt time.Time
highestSentTimestampMetric *maxGauge
pendingSamplesMetric prometheus.Gauge
enqueueRetriesMetric prometheus.Counter
droppedSamplesTotal prometheus.Counter
numShardsMetric prometheus.Gauge
failedSamplesTotal prometheus.Counter
sentBatchDuration prometheus.Observer
succeededSamplesTotal prometheus.Counter
retriedSamplesTotal prometheus.Counter
shardCapacity prometheus.Gauge
maxNumShards prometheus.Gauge
minNumShards prometheus.Gauge
desiredNumShards prometheus.Gauge
bytesSent prometheus.Counter
2017-05-10 02:44:13 -07:00
}
// NewQueueManager builds a new QueueManager.
func NewQueueManager(reg prometheus.Registerer, logger log.Logger, walDir string, samplesIn *ewmaRate, cfg config.QueueConfig, externalLabels labels.Labels, relabelConfigs []*relabel.Config, client StorageClient, flushDeadline time.Duration) *QueueManager {
2017-08-11 11:45:52 -07:00
if logger == nil {
logger = log.NewNopLogger()
}
logger = log.With(logger, remoteName, client.Name(), endpoint, client.Endpoint())
2017-05-10 02:44:13 -07:00
t := &QueueManager{
logger: logger,
flushDeadline: flushDeadline,
2017-05-10 02:44:13 -07:00
cfg: cfg,
externalLabels: externalLabels,
relabelConfigs: relabelConfigs,
client: client,
seriesLabels: make(map[uint64]labels.Labels),
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
seriesSegmentIndexes: make(map[uint64]int),
droppedSeries: make(map[uint64]struct{}),
numShards: cfg.MinShards,
2017-05-10 02:44:13 -07:00
reshardChan: make(chan int),
quit: make(chan struct{}),
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
samplesIn: samplesIn,
samplesDropped: newEWMARate(ewmaWeight, shardUpdateDuration),
2017-05-10 02:44:13 -07:00
samplesOut: newEWMARate(ewmaWeight, shardUpdateDuration),
samplesOutDuration: newEWMARate(ewmaWeight, shardUpdateDuration),
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
t.watcher = wal.NewWatcher(reg, wal.NewWatcherMetrics(reg), logger, client.Name(), t, walDir)
t.shards = t.newShards()
2017-05-10 02:44:13 -07:00
return t
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
// Append queues a sample to be sent to the remote storage. Blocks until all samples are
// enqueued on their shards or a shutdown signal is received.
func (t *QueueManager) Append(samples []record.RefSample) bool {
outer:
for _, s := range samples {
t.seriesMtx.Lock()
lbls, ok := t.seriesLabels[s.Ref]
if !ok {
t.droppedSamplesTotal.Inc()
t.samplesDropped.incr(1)
if _, ok := t.droppedSeries[s.Ref]; !ok {
level.Info(t.logger).Log("msg", "dropped sample for series that was not explicitly dropped via relabelling", "ref", s.Ref)
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
}
t.seriesMtx.Unlock()
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
continue
}
t.seriesMtx.Unlock()
// This will only loop if the queues are being resharded.
backoff := t.cfg.MinBackoff
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
for {
select {
case <-t.quit:
return false
default:
}
2017-05-10 02:44:13 -07:00
if t.shards.enqueue(s.Ref, sample{
labels: lbls,
t: s.T,
v: s.V,
}) {
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
continue outer
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
t.enqueueRetriesMetric.Inc()
time.Sleep(time.Duration(backoff))
backoff = backoff * 2
if backoff > t.cfg.MaxBackoff {
backoff = t.cfg.MaxBackoff
}
2017-05-10 02:44:13 -07:00
}
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
return true
2017-05-10 02:44:13 -07:00
}
// Start the queue manager sending samples to the remote storage.
// Does not block.
func (t *QueueManager) Start() {
t.startedAt = time.Now()
// Setup the QueueManagers metrics. We do this here rather than in the
// constructor because of the ordering of creating Queue Managers's, stopping them,
// and then starting new ones in storage/remote/storage.go ApplyConfig.
name := t.client.Name()
ep := t.client.Endpoint()
t.highestSentTimestampMetric = &maxGauge{
Gauge: queueHighestSentTimestamp.WithLabelValues(name, ep),
}
t.pendingSamplesMetric = queuePendingSamples.WithLabelValues(name, ep)
t.enqueueRetriesMetric = enqueueRetriesTotal.WithLabelValues(name, ep)
t.droppedSamplesTotal = droppedSamplesTotal.WithLabelValues(name, ep)
t.numShardsMetric = numShards.WithLabelValues(name, ep)
t.failedSamplesTotal = failedSamplesTotal.WithLabelValues(name, ep)
t.sentBatchDuration = sentBatchDuration.WithLabelValues(name, ep)
t.succeededSamplesTotal = succeededSamplesTotal.WithLabelValues(name, ep)
t.retriedSamplesTotal = retriedSamplesTotal.WithLabelValues(name, ep)
t.shardCapacity = shardCapacity.WithLabelValues(name, ep)
t.maxNumShards = maxNumShards.WithLabelValues(name, ep)
t.minNumShards = minNumShards.WithLabelValues(name, ep)
t.desiredNumShards = desiredNumShards.WithLabelValues(name, ep)
t.bytesSent = bytesSent.WithLabelValues(name, ep)
// Initialise some metrics.
t.shardCapacity.Set(float64(t.cfg.Capacity))
t.pendingSamplesMetric.Set(0)
t.maxNumShards.Set(float64(t.cfg.MaxShards))
t.minNumShards.Set(float64(t.cfg.MinShards))
t.desiredNumShards.Set(float64(t.cfg.MinShards))
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
t.shards.start(t.numShards)
t.watcher.Start()
2017-05-10 02:44:13 -07:00
t.wg.Add(2)
go t.updateShardsLoop()
go t.reshardLoop()
}
// Stop stops sending samples to the remote storage and waits for pending
// sends to complete.
func (t *QueueManager) Stop() {
2017-08-11 11:45:52 -07:00
level.Info(t.logger).Log("msg", "Stopping remote storage...")
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
defer level.Info(t.logger).Log("msg", "Remote storage stopped.")
2017-05-10 02:44:13 -07:00
close(t.quit)
t.wg.Wait()
// Wait for all QueueManager routines to end before stopping shards and WAL watcher. This
// is to ensure we don't end up executing a reshard and shards.stop() at the same time, which
// causes a closed channel panic.
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
t.shards.stop()
t.watcher.Stop()
// On shutdown, release the strings in the labels from the intern pool.
t.seriesMtx.Lock()
for _, labels := range t.seriesLabels {
releaseLabels(labels)
}
t.seriesMtx.Unlock()
// Delete metrics so we don't have alerts for queues that are gone.
name := t.client.Name()
ep := t.client.Endpoint()
queueHighestSentTimestamp.DeleteLabelValues(name, ep)
queuePendingSamples.DeleteLabelValues(name, ep)
enqueueRetriesTotal.DeleteLabelValues(name, ep)
droppedSamplesTotal.DeleteLabelValues(name, ep)
numShards.DeleteLabelValues(name, ep)
failedSamplesTotal.DeleteLabelValues(name, ep)
sentBatchDuration.DeleteLabelValues(name, ep)
succeededSamplesTotal.DeleteLabelValues(name, ep)
retriedSamplesTotal.DeleteLabelValues(name, ep)
shardCapacity.DeleteLabelValues(name, ep)
maxNumShards.DeleteLabelValues(name, ep)
minNumShards.DeleteLabelValues(name, ep)
desiredNumShards.DeleteLabelValues(name, ep)
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
}
// StoreSeries keeps track of which series we know about for lookups when sending samples to remote.
func (t *QueueManager) StoreSeries(series []record.RefSeries, index int) {
t.seriesMtx.Lock()
defer t.seriesMtx.Unlock()
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
for _, s := range series {
ls := processExternalLabels(s.Labels, t.externalLabels)
lbls := relabel.Process(ls, t.relabelConfigs...)
if len(lbls) == 0 {
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
t.droppedSeries[s.Ref] = struct{}{}
continue
}
t.seriesSegmentIndexes[s.Ref] = index
internLabels(lbls)
// We should not ever be replacing a series labels in the map, but just
// in case we do we need to ensure we do not leak the replaced interned
// strings.
if orig, ok := t.seriesLabels[s.Ref]; ok {
releaseLabels(orig)
}
t.seriesLabels[s.Ref] = lbls
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
}
}
2017-05-10 02:44:13 -07:00
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
// SeriesReset is used when reading a checkpoint. WAL Watcher should have
// stored series records with the checkpoints index number, so we can now
// delete any ref ID's lower than that # from the two maps.
func (t *QueueManager) SeriesReset(index int) {
t.seriesMtx.Lock()
defer t.seriesMtx.Unlock()
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
// Check for series that are in segments older than the checkpoint
// that were not also present in the checkpoint.
for k, v := range t.seriesSegmentIndexes {
if v < index {
delete(t.seriesSegmentIndexes, k)
releaseLabels(t.seriesLabels[k])
delete(t.seriesLabels, k)
delete(t.droppedSeries, k)
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
}
}
}
2017-08-11 11:45:52 -07:00
func internLabels(lbls labels.Labels) {
for i, l := range lbls {
lbls[i].Name = interner.intern(l.Name)
lbls[i].Value = interner.intern(l.Value)
}
}
func releaseLabels(ls labels.Labels) {
for _, l := range ls {
interner.release(l.Name)
interner.release(l.Value)
}
}
// processExternalLabels merges externalLabels into ls. If ls contains
// a label in externalLabels, the value in ls wins.
func processExternalLabels(ls labels.Labels, externalLabels labels.Labels) labels.Labels {
i, j, result := 0, 0, make(labels.Labels, 0, len(ls)+len(externalLabels))
for i < len(ls) && j < len(externalLabels) {
if ls[i].Name < externalLabels[j].Name {
result = append(result, labels.Label{
Name: ls[i].Name,
Value: ls[i].Value,
})
i++
} else if ls[i].Name > externalLabels[j].Name {
result = append(result, externalLabels[j])
j++
} else {
result = append(result, labels.Label{
Name: ls[i].Name,
Value: ls[i].Value,
})
i++
j++
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
}
}
for ; i < len(ls); i++ {
result = append(result, labels.Label{
Name: ls[i].Name,
Value: ls[i].Value,
})
}
result = append(result, externalLabels[j:]...)
return result
2017-05-10 02:44:13 -07:00
}
func (t *QueueManager) updateShardsLoop() {
defer t.wg.Done()
ticker := time.NewTicker(shardUpdateDuration)
defer ticker.Stop()
2017-05-10 02:44:13 -07:00
for {
select {
case <-ticker.C:
desiredShards := t.calculateDesiredShards()
if desiredShards == t.numShards {
continue
}
// Resharding can take some time, and we want this loop
// to stay close to shardUpdateDuration.
select {
case t.reshardChan <- desiredShards:
level.Info(t.logger).Log("msg", "Remote storage resharding", "from", t.numShards, "to", desiredShards)
t.numShards = desiredShards
default:
level.Info(t.logger).Log("msg", "Currently resharding, skipping.")
}
2017-05-10 02:44:13 -07:00
case <-t.quit:
return
}
}
}
// calculateDesiredShards returns the number of desired shards, which will be
// the current QueueManager.numShards if resharding should not occur for reasons
// outlined in this functions implementation. It is up to the caller to reshard, or not,
// based on the return value.
func (t *QueueManager) calculateDesiredShards() int {
2017-05-10 02:44:13 -07:00
t.samplesOut.tick()
t.samplesDropped.tick()
2017-05-10 02:44:13 -07:00
t.samplesOutDuration.tick()
// We use the number of incoming samples as a prediction of how much work we
// will need to do next iteration. We add to this any pending samples
// (received - send) so we can catch up with any backlog. We use the average
// outgoing batch latency to work out how many shards we need.
var (
samplesInRate = t.samplesIn.rate()
samplesOutRate = t.samplesOut.rate()
samplesKeptRatio = samplesOutRate / (t.samplesDropped.rate() + samplesOutRate)
samplesOutDuration = t.samplesOutDuration.rate() / float64(time.Second)
samplesPendingRate = samplesInRate*samplesKeptRatio - samplesOutRate
highestSent = t.highestSentTimestampMetric.Get()
highestRecv = highestTimestamp.Get()
samplesPending = (highestRecv - highestSent) * samplesInRate * samplesKeptRatio
2017-05-10 02:44:13 -07:00
)
if samplesOutRate <= 0 {
return t.numShards
2017-05-10 02:44:13 -07:00
}
// We use an integral accumulator, like in a PID, to help dampen
// oscillation. The accumulator will correct for any errors not accounted
// for in the desired shard calculation by adjusting for pending samples.
const integralGain = 0.2
// Initialise the integral accumulator as the average rate of samples
// pending. This accounts for pending samples that were created while the
// WALWatcher starts up.
if t.integralAccumulator == 0 {
elapsed := time.Since(t.startedAt) / time.Second
t.integralAccumulator = integralGain * samplesPending / float64(elapsed)
}
t.integralAccumulator += samplesPendingRate * integralGain
// We shouldn't reshard if Prometheus hasn't been able to send to the
// remote endpoint successfully within some period of time.
minSendTimestamp := time.Now().Add(-2 * time.Duration(t.cfg.BatchSendDeadline)).Unix()
lsts := atomic.LoadInt64(&t.lastSendTimestamp)
if lsts < minSendTimestamp {
level.Warn(t.logger).Log("msg", "Skipping resharding, last successful send was beyond threshold", "lastSendTimestamp", lsts, "minSendTimestamp", minSendTimestamp)
return t.numShards
}
2017-05-10 02:44:13 -07:00
var (
timePerSample = samplesOutDuration / samplesOutRate
desiredShards = timePerSample * (samplesInRate + t.integralAccumulator)
2017-05-10 02:44:13 -07:00
)
t.desiredNumShards.Set(desiredShards)
level.Debug(t.logger).Log("msg", "QueueManager.calculateDesiredShards",
"samplesInRate", samplesInRate,
"samplesOutRate", samplesOutRate,
"samplesKeptRatio", samplesKeptRatio,
"samplesPendingRate", samplesPendingRate,
"samplesPending", samplesPending,
"samplesOutDuration", samplesOutDuration,
"timePerSample", timePerSample,
"desiredShards", desiredShards,
"highestSent", highestSent,
"highestRecv", highestRecv,
"integralAccumulator", t.integralAccumulator,
)
2017-05-10 02:44:13 -07:00
// Changes in the number of shards must be greater than shardToleranceFraction.
var (
lowerBound = float64(t.numShards) * (1. - shardToleranceFraction)
upperBound = float64(t.numShards) * (1. + shardToleranceFraction)
)
2017-08-11 11:45:52 -07:00
level.Debug(t.logger).Log("msg", "QueueManager.updateShardsLoop",
"lowerBound", lowerBound, "desiredShards", desiredShards, "upperBound", upperBound)
2017-05-10 02:44:13 -07:00
if lowerBound <= desiredShards && desiredShards <= upperBound {
return t.numShards
2017-05-10 02:44:13 -07:00
}
numShards := int(math.Ceil(desiredShards))
if numShards > t.cfg.MaxShards {
numShards = t.cfg.MaxShards
} else if numShards < t.cfg.MinShards {
numShards = t.cfg.MinShards
2017-05-10 02:44:13 -07:00
}
return numShards
2017-05-10 02:44:13 -07:00
}
func (t *QueueManager) reshardLoop() {
defer t.wg.Done()
for {
select {
case numShards := <-t.reshardChan:
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
// We start the newShards after we have stopped (the therefore completely
// flushed) the oldShards, to guarantee we only every deliver samples in
// order.
t.shards.stop()
t.shards.start(numShards)
2017-05-10 02:44:13 -07:00
case <-t.quit:
return
}
}
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
func (t *QueueManager) newShards() *shards {
s := &shards{
qm: t,
done: make(chan struct{}),
}
return s
}
2017-05-10 02:44:13 -07:00
type sample struct {
labels labels.Labels
t int64
v float64
}
2017-05-10 02:44:13 -07:00
type shards struct {
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
mtx sync.RWMutex // With the WAL, this is never actually contended.
qm *QueueManager
queues []chan sample
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
// Emulate a wait group with a channel and an atomic int, as you
// cannot select on a wait group.
done chan struct{}
running int32
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
// Soft shutdown context will prevent new enqueues and deadlocks.
softShutdown chan struct{}
// Hard shutdown context is used to terminate outgoing HTTP connections
// after giving them a chance to terminate.
hardShutdown context.CancelFunc
2017-05-10 02:44:13 -07:00
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
// start the shards; must be called before any call to enqueue.
func (s *shards) start(n int) {
s.mtx.Lock()
defer s.mtx.Unlock()
newQueues := make([]chan sample, n)
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
for i := 0; i < n; i++ {
newQueues[i] = make(chan sample, s.qm.cfg.Capacity)
2017-05-10 02:44:13 -07:00
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
s.queues = newQueues
var hardShutdownCtx context.Context
hardShutdownCtx, s.hardShutdown = context.WithCancel(context.Background())
s.softShutdown = make(chan struct{})
s.running = int32(n)
s.done = make(chan struct{})
for i := 0; i < n; i++ {
go s.runShard(hardShutdownCtx, i, newQueues[i])
2017-05-10 02:44:13 -07:00
}
s.qm.numShardsMetric.Set(float64(n))
2017-05-10 02:44:13 -07:00
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
// stop the shards; subsequent call to enqueue will return false.
func (s *shards) stop() {
// Attempt a clean shutdown, but only wait flushDeadline for all the shards
// to cleanly exit. As we're doing RPCs, enqueue can block indefinitely.
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
// We must be able so call stop concurrently, hence we can only take the
// RLock here.
s.mtx.RLock()
close(s.softShutdown)
s.mtx.RUnlock()
// Enqueue should now be unblocked, so we can take the write lock. This
// also ensures we don't race with writes to the queues, and get a panic:
// send on closed channel.
s.mtx.Lock()
defer s.mtx.Unlock()
for _, queue := range s.queues {
close(queue)
2017-05-10 02:44:13 -07:00
}
select {
case <-s.done:
return
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
case <-time.After(s.qm.flushDeadline):
level.Error(s.qm.logger).Log("msg", "Failed to flush all samples on shutdown")
}
// Force an unclean shutdown.
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
s.hardShutdown()
<-s.done
2017-05-10 02:44:13 -07:00
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
// enqueue a sample. If we are currently in the process of shutting down or resharding,
// will return false; in this case, you should back off and retry.
func (s *shards) enqueue(ref uint64, sample sample) bool {
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
s.mtx.RLock()
defer s.mtx.RUnlock()
2017-05-10 02:44:13 -07:00
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
select {
case <-s.softShutdown:
return false
default:
}
2017-05-10 02:44:13 -07:00
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
shard := uint64(ref) % uint64(len(s.queues))
2017-05-10 02:44:13 -07:00
select {
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
case <-s.softShutdown:
return false
2017-05-10 02:44:13 -07:00
case s.queues[shard] <- sample:
return true
}
}
func (s *shards) runShard(ctx context.Context, shardID int, queue chan sample) {
defer func() {
if atomic.AddInt32(&s.running, -1) == 0 {
close(s.done)
}
}()
shardNum := strconv.Itoa(shardID)
2017-05-10 02:44:13 -07:00
// Send batches of at most MaxSamplesPerSend samples to the remote storage.
// If we have fewer samples than that, flush them out after a deadline
// anyways.
var (
max = s.qm.cfg.MaxSamplesPerSend
nPending = 0
pendingSamples = allocateTimeSeries(max)
buf []byte
)
timer := time.NewTimer(time.Duration(s.qm.cfg.BatchSendDeadline))
2018-03-12 07:27:48 -07:00
stop := func() {
if !timer.Stop() {
select {
case <-timer.C:
default:
}
}
2018-03-12 07:27:48 -07:00
}
defer stop()
2017-05-10 02:44:13 -07:00
for {
select {
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
case <-ctx.Done():
return
2017-05-10 02:44:13 -07:00
case sample, ok := <-queue:
if !ok {
if nPending > 0 {
level.Debug(s.qm.logger).Log("msg", "Flushing samples to remote storage...", "count", nPending)
s.sendSamples(ctx, pendingSamples[:nPending], &buf)
s.qm.pendingSamplesMetric.Sub(float64(nPending))
2017-08-11 11:45:52 -07:00
level.Debug(s.qm.logger).Log("msg", "Done flushing.")
2017-05-10 02:44:13 -07:00
}
return
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
// Number of pending samples is limited by the fact that sendSamples (via sendSamplesWithBackoff)
// retries endlessly, so once we reach max samples, if we can never send to the endpoint we'll
// stop reading from the queue. This makes it safe to reference pendingSamples by index.
pendingSamples[nPending].Labels = labelsToLabelsProto(sample.labels, pendingSamples[nPending].Labels)
pendingSamples[nPending].Samples[0].Timestamp = sample.t
pendingSamples[nPending].Samples[0].Value = sample.v
nPending++
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
s.qm.pendingSamplesMetric.Inc()
2017-05-10 02:44:13 -07:00
if nPending >= max {
s.sendSamples(ctx, pendingSamples, &buf)
nPending = 0
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
s.qm.pendingSamplesMetric.Sub(float64(max))
2018-03-12 07:27:48 -07:00
stop()
timer.Reset(time.Duration(s.qm.cfg.BatchSendDeadline))
2017-05-10 02:44:13 -07:00
}
case <-timer.C:
if nPending > 0 {
level.Debug(s.qm.logger).Log("msg", "runShard timer ticked, sending samples", "samples", nPending, "shard", shardNum)
s.sendSamples(ctx, pendingSamples[:nPending], &buf)
nPending = 0
s.qm.pendingSamplesMetric.Sub(float64(nPending))
2017-05-10 02:44:13 -07:00
}
timer.Reset(time.Duration(s.qm.cfg.BatchSendDeadline))
2017-05-10 02:44:13 -07:00
}
}
}
func (s *shards) sendSamples(ctx context.Context, samples []prompb.TimeSeries, buf *[]byte) {
2017-05-10 02:44:13 -07:00
begin := time.Now()
err := s.sendSamplesWithBackoff(ctx, samples, buf)
if err != nil {
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
level.Error(s.qm.logger).Log("msg", "non-recoverable error", "count", len(samples), "err", err)
s.qm.failedSamplesTotal.Add(float64(len(samples)))
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
}
2017-05-10 02:44:13 -07:00
2018-04-08 02:51:54 -07:00
// These counters are used to calculate the dynamic sharding, and as such
2017-05-10 02:44:13 -07:00
// should be maintained irrespective of success or failure.
s.qm.samplesOut.incr(int64(len(samples)))
s.qm.samplesOutDuration.incr(int64(time.Since(begin)))
}
// sendSamples to the remote storage with backoff for recoverable errors.
func (s *shards) sendSamplesWithBackoff(ctx context.Context, samples []prompb.TimeSeries, buf *[]byte) error {
2017-05-10 02:44:13 -07:00
backoff := s.qm.cfg.MinBackoff
req, highest, err := buildWriteRequest(samples, *buf)
*buf = req
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
if err != nil {
// Failing to build the write request is non-recoverable, since it will
// only error if marshaling the proto to bytes fails.
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
return err
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
for {
select {
case <-ctx.Done():
return ctx.Err()
default:
}
2017-05-10 02:44:13 -07:00
begin := time.Now()
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
err := s.qm.client.Store(ctx, req)
2017-05-10 02:44:13 -07:00
s.qm.sentBatchDuration.Observe(time.Since(begin).Seconds())
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
2017-05-10 02:44:13 -07:00
if err == nil {
s.qm.succeededSamplesTotal.Add(float64(len(samples)))
s.qm.bytesSent.Add(float64(len(req)))
s.qm.highestSentTimestampMetric.Set(float64(highest / 1000))
atomic.StoreInt64(&s.qm.lastSendTimestamp, time.Now().Unix())
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
return nil
2017-05-10 02:44:13 -07:00
}
if _, ok := err.(recoverableError); !ok {
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
return err
2017-05-10 02:44:13 -07:00
}
s.qm.retriedSamplesTotal.Add(float64(len(samples)))
level.Debug(s.qm.logger).Log("msg", "failed to send batch, retrying", "err", err)
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
time.Sleep(time.Duration(backoff))
2017-05-10 02:44:13 -07:00
backoff = backoff * 2
if backoff > s.qm.cfg.MaxBackoff {
backoff = s.qm.cfg.MaxBackoff
}
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
}
func buildWriteRequest(samples []prompb.TimeSeries, buf []byte) ([]byte, int64, error) {
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
var highest int64
for _, ts := range samples {
// At the moment we only ever append a TimeSeries with a single sample in it.
if ts.Samples[0].Timestamp > highest {
highest = ts.Samples[0].Timestamp
}
}
req := &prompb.WriteRequest{
Timeseries: samples,
}
data, err := proto.Marshal(req)
if err != nil {
return nil, highest, err
}
2017-05-10 02:44:13 -07:00
// snappy uses len() to see if it needs to allocate a new slice. Make the
// buffer as long as possible.
if buf != nil {
buf = buf[0:cap(buf)]
}
compressed := snappy.Encode(buf, data)
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 14:26:04 -07:00
return compressed, highest, nil
2017-05-10 02:44:13 -07:00
}
func allocateTimeSeries(capacity int) []prompb.TimeSeries {
timeseries := make([]prompb.TimeSeries, capacity)
// We only ever send one sample per timeseries, so preallocate with length one.
for i := range timeseries {
timeseries[i].Samples = []prompb.Sample{{}}
}
return timeseries
}