prometheus/storage/remote/write.go

331 lines
9.3 KiB
Go
Raw Normal View History

2017-05-10 02:44:13 -07:00
// Copyright 2017 The Prometheus Authors
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package remote
import (
"context"
"fmt"
Initial draft of prometheus-agent (#8785) * Initial draft of prometheus-agent This commit introduces a new binary, prometheus-agent, based on the Grafana Agent code. It runs a WAL-only version of prometheus without the TSDB, alerting, or rule evaluations. It is intended to be used to remote_write to Prometheus or another remote_write receiver. By default, prometheus-agent will listen on port 9095 to not collide with the prometheus default of 9090. Truncation of the WAL cooperates on a best-effort case with Remote Write. Every time the WAL is truncated, the minimum timestamp of data to truncate is determined by the lowest sent timestamp of all samples across all remote_write endpoints. This gives loose guarantees that data from the WAL will not try to be removed until the maximum sample lifetime passes or remote_write starts functionining. Signed-off-by: Robert Fratto <robertfratto@gmail.com> * add tests for Prometheus agent (#22) * add tests for Prometheus agent * add tests for Prometheus agent * rearranged tests as per the review comments * update tests for Agent * changes as per code review comments Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com> * incremental changes to prometheus agent Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com> * changes as per code review comments Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com> * Commit feedback from code review Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Robert Fratto <robertfratto@gmail.com> * Port over some comments from grafana/agent Signed-off-by: Robert Fratto <robertfratto@gmail.com> * Rename agent.Storage to agent.DB for tsdb consistency Signed-off-by: Robert Fratto <robertfratto@gmail.com> * Consolidate agentMode ifs in cmd/prometheus/main.go Signed-off-by: Robert Fratto <robertfratto@gmail.com> * Document PreAction usage requirements better for agent mode flags Signed-off-by: Robert Fratto <robertfratto@gmail.com> * remove unnecessary defaultListenAddr Signed-off-by: Robert Fratto <robertfratto@gmail.com> * `go fmt ./tsdb/agent` and fix lint errors Signed-off-by: Robert Fratto <robertfratto@gmail.com> Co-authored-by: SriKrishna Paparaju <paparaju@gmail.com>
2021-10-29 08:25:05 -07:00
"math"
"sync"
"time"
"github.com/go-kit/log"
"github.com/prometheus/client_golang/prometheus"
"github.com/prometheus/client_golang/prometheus/promauto"
"github.com/prometheus/prometheus/config"
"github.com/prometheus/prometheus/model/exemplar"
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
2021-10-09 06:57:07 -07:00
"github.com/prometheus/prometheus/model/histogram"
"github.com/prometheus/prometheus/model/labels"
Introduce TSDB changes for appending metadata to the WAL (#10972) * Append metadata to the WAL Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Remove extra whitespace; Reword some docstrings and comments Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Use RLock() for hasNewMetadata check Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Use single byte for metric type in RefMetadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Update proposed WAL format for single-byte type metadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Implementa MetadataAppender interface for the Agent Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Address first round of review comments Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Amend description of metadata in wal.md Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Correct key used to retrieve metadata from cache When we're setting metadata entries in the scrapeCace, we're using the p.Help(), p.Unit(), p.Type() helpers, which retrieve the series name and use it as the cache key. When checking for cache entries though, we used p.Series() as the key, which included the metric name _with_ its labels. That meant that we were never actually hitting the cache. We're fixing this by utiling the __name__ internal label for correctly getting the cache entries after they've been set by setHelp(), setType() or setUnit(). Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Put feature behind a feature flag Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix AppendMetadata docstring Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Reorder WAL format document Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Change error message of AppendMetadata; Fix access of s.meta in AppendMetadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Reuse temporary buffer in Metadata encoder Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Only keep latest metadata for each refID during checkpointing Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix test that's referencing decoding metadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Avoid creating metadata block if no new metadata are present Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Add tests for corrupt metadata block and relevant record type Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix CR comments Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Extract logic about changing metadata in an anonymous function Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Implement new proposed WAL format and amend relevant tests Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Use 'const' for metadata field names Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Apply metadata to head memSeries in Commit, not in AppendMetadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Add docstring and rename extracted helper in scrape.go Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Add tests for tsdb-related cases Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix linter issues vol1 Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix linter issues vol2 Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix Windows test by closing WAL reader files Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Use switch instead of two if statements in metadata decoding Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix review comments around TestMetadata* tests Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Add code for replaying WAL; test correctness of in-memory data after a replay Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Remove scrape-loop related code from PR Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Address first round of comments Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Simplify tests by sorting slices before comparison Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix test to use separate transactions Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Empty out buffer and record slices after encoding latest metadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix linting issue Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Update calculation for DroppedMetadata metric Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Rename MetadataAppender interface and AppendMetadata method to MetadataUpdater/UpdateMetadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Reuse buffer when encoding latest metadata for each series Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix review comments; Check all returned error values using two helpers Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Simplify use of helpers Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Satisfy linter Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
2022-07-19 01:58:52 -07:00
"github.com/prometheus/prometheus/model/metadata"
2017-05-10 02:44:13 -07:00
"github.com/prometheus/prometheus/storage"
"github.com/prometheus/prometheus/tsdb/wlog"
2017-05-10 02:44:13 -07:00
)
var (
samplesIn = promauto.NewCounter(prometheus.CounterOpts{
Namespace: namespace,
Subsystem: subsystem,
Name: "samples_in_total",
Help: "Samples in to remote storage, compare to samples out for queue managers.",
})
Add Exemplar Remote Write support (#8296) * Write exemplars to the WAL and send them over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update example for exemplars, print data in a more obvious format. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add metrics for remote write of exemplars. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix incorrect slices passed to send in remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * We need to unregister the new metrics. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> * Order of exemplar append vs write exemplar to WAL needs to change. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Condense sample/exemplar delivery tests to parameterized sub-tests Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename test methods for clarity now that they also handle exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename counter variable. Fix instances where metrics were not updated correctly Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Add exemplars to LoadWAL benchmark Signed-off-by: Callum Styan <callumstyan@gmail.com> * last exemplars timestamp metric needs to convert value to seconds with ms precision Signed-off-by: Callum Styan <callumstyan@gmail.com> * Process exemplar records in a separate go routine when loading the WAL. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments related to clarifying comments and variable names. Also refactor sample/exemplar to enqueue prompb types. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Regenerate types proto with comments, update protoc version again. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Put remote write of exemplars behind a feature flag. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address some of Ganesh's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Move exemplar remote write feature flag to a config file field. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address Bartek's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Don't allocate exemplar buffers in queue_manager if we're not going to send exemplars over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add ValidateExemplar function, validate exemplars when appending to head and log them all to WAL before adding them to exemplar storage. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address more reivew comments from Ganesh. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add exemplar total label length check. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address a few last review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> Co-authored-by: Martin Disibio <mdisibio@gmail.com>
2021-05-06 13:53:52 -07:00
exemplarsIn = promauto.NewCounter(prometheus.CounterOpts{
Namespace: namespace,
Subsystem: subsystem,
Name: "exemplars_in_total",
Help: "Exemplars in to remote storage, compare to exemplars out for queue managers.",
})
histogramsIn = promauto.NewCounter(prometheus.CounterOpts{
Namespace: namespace,
Subsystem: subsystem,
Name: "histograms_in_total",
Help: "HistogramSamples in to remote storage, compare to histograms out for queue managers.",
})
)
// WriteStorage represents all the remote write storage.
type WriteStorage struct {
logger log.Logger
reg prometheus.Registerer
mtx sync.Mutex
watcherMetrics *wlog.WatcherMetrics
liveReaderMetrics *wlog.LiveReaderMetrics
externalLabels labels.Labels
dir string
queues map[string]*QueueManager
writeReducedProto bool
samplesIn *ewmaRate
flushDeadline time.Duration
interner *pool
scraper ReadyScrapeManager
quit chan struct{}
// For timestampTracker.
highestTimestamp *maxTimestamp
}
// NewWriteStorage creates and runs a WriteStorage.
func NewWriteStorage(logger log.Logger, reg prometheus.Registerer, dir string, flushDeadline time.Duration, sm ReadyScrapeManager, writeReducedProto bool) *WriteStorage {
if logger == nil {
logger = log.NewNopLogger()
}
rws := &WriteStorage{
queues: make(map[string]*QueueManager),
writeReducedProto: writeReducedProto,
watcherMetrics: wlog.NewWatcherMetrics(reg),
liveReaderMetrics: wlog.NewLiveReaderMetrics(reg),
logger: logger,
reg: reg,
flushDeadline: flushDeadline,
samplesIn: newEWMARate(ewmaWeight, shardUpdateDuration),
dir: dir,
interner: newPool(),
scraper: sm,
quit: make(chan struct{}),
highestTimestamp: &maxTimestamp{
Gauge: prometheus.NewGauge(prometheus.GaugeOpts{
Namespace: namespace,
Subsystem: subsystem,
Name: "highest_timestamp_in_seconds",
Help: "Highest timestamp that has come into the remote storage via the Appender interface, in seconds since epoch.",
}),
},
}
if reg != nil {
reg.MustRegister(rws.highestTimestamp)
}
go rws.run()
return rws
}
func (rws *WriteStorage) run() {
ticker := time.NewTicker(shardUpdateDuration)
defer ticker.Stop()
for {
select {
case <-ticker.C:
rws.samplesIn.tick()
case <-rws.quit:
return
}
}
}
func (rws *WriteStorage) Notify() {
rws.mtx.Lock()
defer rws.mtx.Unlock()
for _, q := range rws.queues {
// These should all be non blocking
q.watcher.Notify()
}
}
// ApplyConfig updates the state as the new config requires.
// Only stop & create queues which have changes.
func (rws *WriteStorage) ApplyConfig(conf *config.Config) error {
rws.mtx.Lock()
defer rws.mtx.Unlock()
// Remote write queues only need to change if the remote write config or
// external labels change.
externalLabelUnchanged := labels.Equal(conf.GlobalConfig.ExternalLabels, rws.externalLabels)
rws.externalLabels = conf.GlobalConfig.ExternalLabels
newQueues := make(map[string]*QueueManager)
newHashes := []string{}
for _, rwConf := range conf.RemoteWriteConfigs {
hash, err := toHash(rwConf)
if err != nil {
return err
}
// Don't allow duplicate remote write configs.
if _, ok := newQueues[hash]; ok {
return fmt.Errorf("duplicate remote write configs are not allowed, found duplicate for URL: %s", rwConf.URL)
}
// Set the queue name to the config hash if the user has not set
// a name in their remote write config so we can still differentiate
// between queues that have the same remote write endpoint.
name := hash[:6]
if rwConf.Name != "" {
name = rwConf.Name
}
c, err := NewWriteClient(name, &ClientConfig{
URL: rwConf.URL,
Version: rwConf.Version,
Timeout: rwConf.RemoteTimeout,
HTTPClientConfig: rwConf.HTTPClientConfig,
SigV4Config: rwConf.SigV4Config,
AzureADConfig: rwConf.AzureADConfig,
Headers: rwConf.Headers,
RetryOnRateLimit: rwConf.QueueConfig.RetryOnRateLimit,
})
if err != nil {
return err
}
queue, ok := rws.queues[hash]
if externalLabelUnchanged && ok {
// Update the client in case any secret configuration has changed.
queue.SetClient(c)
newQueues[hash] = queue
delete(rws.queues, hash)
continue
}
// Redacted to remove any passwords in the URL (that are
// technically accepted but not recommended) since this is
// only used for metric labels.
endpoint := rwConf.URL.Redacted()
newQueues[hash] = NewQueueManager(
newQueueManagerMetrics(rws.reg, name, endpoint),
rws.watcherMetrics,
rws.liveReaderMetrics,
rws.logger,
rws.dir,
rws.samplesIn,
rwConf.QueueConfig,
rwConf.MetadataConfig,
conf.GlobalConfig.ExternalLabels,
rwConf.WriteRelabelConfigs,
c,
rws.flushDeadline,
rws.interner,
rws.highestTimestamp,
rws.scraper,
Add Exemplar Remote Write support (#8296) * Write exemplars to the WAL and send them over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update example for exemplars, print data in a more obvious format. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add metrics for remote write of exemplars. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix incorrect slices passed to send in remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * We need to unregister the new metrics. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> * Order of exemplar append vs write exemplar to WAL needs to change. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Condense sample/exemplar delivery tests to parameterized sub-tests Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename test methods for clarity now that they also handle exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename counter variable. Fix instances where metrics were not updated correctly Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Add exemplars to LoadWAL benchmark Signed-off-by: Callum Styan <callumstyan@gmail.com> * last exemplars timestamp metric needs to convert value to seconds with ms precision Signed-off-by: Callum Styan <callumstyan@gmail.com> * Process exemplar records in a separate go routine when loading the WAL. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments related to clarifying comments and variable names. Also refactor sample/exemplar to enqueue prompb types. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Regenerate types proto with comments, update protoc version again. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Put remote write of exemplars behind a feature flag. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address some of Ganesh's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Move exemplar remote write feature flag to a config file field. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address Bartek's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Don't allocate exemplar buffers in queue_manager if we're not going to send exemplars over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add ValidateExemplar function, validate exemplars when appending to head and log them all to WAL before adding them to exemplar storage. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address more reivew comments from Ganesh. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add exemplar total label length check. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address a few last review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> Co-authored-by: Martin Disibio <mdisibio@gmail.com>
2021-05-06 13:53:52 -07:00
rwConf.SendExemplars,
rwConf.SendNativeHistograms,
rws.writeReducedProto,
)
// Keep track of which queues are new so we know which to start.
newHashes = append(newHashes, hash)
}
// Anything remaining in rws.queues is a queue who's config has
// changed or was removed from the overall remote write config.
for _, q := range rws.queues {
q.Stop()
}
for _, hash := range newHashes {
newQueues[hash].Start()
}
rws.queues = newQueues
return nil
}
// Appender implements storage.Storage.
func (rws *WriteStorage) Appender(_ context.Context) storage.Appender {
return &timestampTracker{
writeStorage: rws,
highestRecvTimestamp: rws.highestTimestamp,
}
}
Initial draft of prometheus-agent (#8785) * Initial draft of prometheus-agent This commit introduces a new binary, prometheus-agent, based on the Grafana Agent code. It runs a WAL-only version of prometheus without the TSDB, alerting, or rule evaluations. It is intended to be used to remote_write to Prometheus or another remote_write receiver. By default, prometheus-agent will listen on port 9095 to not collide with the prometheus default of 9090. Truncation of the WAL cooperates on a best-effort case with Remote Write. Every time the WAL is truncated, the minimum timestamp of data to truncate is determined by the lowest sent timestamp of all samples across all remote_write endpoints. This gives loose guarantees that data from the WAL will not try to be removed until the maximum sample lifetime passes or remote_write starts functionining. Signed-off-by: Robert Fratto <robertfratto@gmail.com> * add tests for Prometheus agent (#22) * add tests for Prometheus agent * add tests for Prometheus agent * rearranged tests as per the review comments * update tests for Agent * changes as per code review comments Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com> * incremental changes to prometheus agent Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com> * changes as per code review comments Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com> * Commit feedback from code review Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Robert Fratto <robertfratto@gmail.com> * Port over some comments from grafana/agent Signed-off-by: Robert Fratto <robertfratto@gmail.com> * Rename agent.Storage to agent.DB for tsdb consistency Signed-off-by: Robert Fratto <robertfratto@gmail.com> * Consolidate agentMode ifs in cmd/prometheus/main.go Signed-off-by: Robert Fratto <robertfratto@gmail.com> * Document PreAction usage requirements better for agent mode flags Signed-off-by: Robert Fratto <robertfratto@gmail.com> * remove unnecessary defaultListenAddr Signed-off-by: Robert Fratto <robertfratto@gmail.com> * `go fmt ./tsdb/agent` and fix lint errors Signed-off-by: Robert Fratto <robertfratto@gmail.com> Co-authored-by: SriKrishna Paparaju <paparaju@gmail.com>
2021-10-29 08:25:05 -07:00
// LowestSentTimestamp returns the lowest sent timestamp across all queues.
func (rws *WriteStorage) LowestSentTimestamp() int64 {
rws.mtx.Lock()
defer rws.mtx.Unlock()
var lowestTs int64 = math.MaxInt64
for _, q := range rws.queues {
ts := int64(q.metrics.highestSentTimestamp.Get() * 1000)
if ts < lowestTs {
lowestTs = ts
}
}
if len(rws.queues) == 0 {
lowestTs = 0
}
return lowestTs
}
// Close closes the WriteStorage.
func (rws *WriteStorage) Close() error {
rws.mtx.Lock()
defer rws.mtx.Unlock()
for _, q := range rws.queues {
q.Stop()
}
close(rws.quit)
return nil
}
type timestampTracker struct {
writeStorage *WriteStorage
samples int64
Add Exemplar Remote Write support (#8296) * Write exemplars to the WAL and send them over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update example for exemplars, print data in a more obvious format. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add metrics for remote write of exemplars. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix incorrect slices passed to send in remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * We need to unregister the new metrics. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> * Order of exemplar append vs write exemplar to WAL needs to change. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Condense sample/exemplar delivery tests to parameterized sub-tests Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename test methods for clarity now that they also handle exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename counter variable. Fix instances where metrics were not updated correctly Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Add exemplars to LoadWAL benchmark Signed-off-by: Callum Styan <callumstyan@gmail.com> * last exemplars timestamp metric needs to convert value to seconds with ms precision Signed-off-by: Callum Styan <callumstyan@gmail.com> * Process exemplar records in a separate go routine when loading the WAL. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments related to clarifying comments and variable names. Also refactor sample/exemplar to enqueue prompb types. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Regenerate types proto with comments, update protoc version again. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Put remote write of exemplars behind a feature flag. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address some of Ganesh's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Move exemplar remote write feature flag to a config file field. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address Bartek's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Don't allocate exemplar buffers in queue_manager if we're not going to send exemplars over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add ValidateExemplar function, validate exemplars when appending to head and log them all to WAL before adding them to exemplar storage. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address more reivew comments from Ganesh. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add exemplar total label length check. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address a few last review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> Co-authored-by: Martin Disibio <mdisibio@gmail.com>
2021-05-06 13:53:52 -07:00
exemplars int64
histograms int64
highestTimestamp int64
highestRecvTimestamp *maxTimestamp
2017-05-10 02:44:13 -07:00
}
// Append implements storage.Appender.
func (t *timestampTracker) Append(_ storage.SeriesRef, _ labels.Labels, ts int64, _ float64) (storage.SeriesRef, error) {
t.samples++
if ts > t.highestTimestamp {
t.highestTimestamp = ts
2017-05-10 02:44:13 -07:00
}
return 0, nil
2017-05-10 02:44:13 -07:00
}
func (t *timestampTracker) AppendExemplar(_ storage.SeriesRef, _ labels.Labels, _ exemplar.Exemplar) (storage.SeriesRef, error) {
Add Exemplar Remote Write support (#8296) * Write exemplars to the WAL and send them over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update example for exemplars, print data in a more obvious format. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add metrics for remote write of exemplars. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix incorrect slices passed to send in remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * We need to unregister the new metrics. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> * Order of exemplar append vs write exemplar to WAL needs to change. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Condense sample/exemplar delivery tests to parameterized sub-tests Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename test methods for clarity now that they also handle exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename counter variable. Fix instances where metrics were not updated correctly Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Add exemplars to LoadWAL benchmark Signed-off-by: Callum Styan <callumstyan@gmail.com> * last exemplars timestamp metric needs to convert value to seconds with ms precision Signed-off-by: Callum Styan <callumstyan@gmail.com> * Process exemplar records in a separate go routine when loading the WAL. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments related to clarifying comments and variable names. Also refactor sample/exemplar to enqueue prompb types. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Regenerate types proto with comments, update protoc version again. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Put remote write of exemplars behind a feature flag. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address some of Ganesh's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Move exemplar remote write feature flag to a config file field. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address Bartek's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Don't allocate exemplar buffers in queue_manager if we're not going to send exemplars over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add ValidateExemplar function, validate exemplars when appending to head and log them all to WAL before adding them to exemplar storage. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address more reivew comments from Ganesh. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add exemplar total label length check. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address a few last review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> Co-authored-by: Martin Disibio <mdisibio@gmail.com>
2021-05-06 13:53:52 -07:00
t.exemplars++
return 0, nil
}
func (t *timestampTracker) AppendHistogram(_ storage.SeriesRef, _ labels.Labels, ts int64, _ *histogram.Histogram, _ *histogram.FloatHistogram) (storage.SeriesRef, error) {
t.histograms++
if ts > t.highestTimestamp {
t.highestTimestamp = ts
}
return 0, nil
}
Introduce TSDB changes for appending metadata to the WAL (#10972) * Append metadata to the WAL Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Remove extra whitespace; Reword some docstrings and comments Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Use RLock() for hasNewMetadata check Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Use single byte for metric type in RefMetadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Update proposed WAL format for single-byte type metadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Implementa MetadataAppender interface for the Agent Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Address first round of review comments Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Amend description of metadata in wal.md Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Correct key used to retrieve metadata from cache When we're setting metadata entries in the scrapeCace, we're using the p.Help(), p.Unit(), p.Type() helpers, which retrieve the series name and use it as the cache key. When checking for cache entries though, we used p.Series() as the key, which included the metric name _with_ its labels. That meant that we were never actually hitting the cache. We're fixing this by utiling the __name__ internal label for correctly getting the cache entries after they've been set by setHelp(), setType() or setUnit(). Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Put feature behind a feature flag Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix AppendMetadata docstring Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Reorder WAL format document Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Change error message of AppendMetadata; Fix access of s.meta in AppendMetadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Reuse temporary buffer in Metadata encoder Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Only keep latest metadata for each refID during checkpointing Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix test that's referencing decoding metadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Avoid creating metadata block if no new metadata are present Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Add tests for corrupt metadata block and relevant record type Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix CR comments Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Extract logic about changing metadata in an anonymous function Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Implement new proposed WAL format and amend relevant tests Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Use 'const' for metadata field names Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Apply metadata to head memSeries in Commit, not in AppendMetadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Add docstring and rename extracted helper in scrape.go Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Add tests for tsdb-related cases Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix linter issues vol1 Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix linter issues vol2 Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix Windows test by closing WAL reader files Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Use switch instead of two if statements in metadata decoding Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix review comments around TestMetadata* tests Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Add code for replaying WAL; test correctness of in-memory data after a replay Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Remove scrape-loop related code from PR Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Address first round of comments Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Simplify tests by sorting slices before comparison Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix test to use separate transactions Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Empty out buffer and record slices after encoding latest metadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix linting issue Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Update calculation for DroppedMetadata metric Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Rename MetadataAppender interface and AppendMetadata method to MetadataUpdater/UpdateMetadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Reuse buffer when encoding latest metadata for each series Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix review comments; Check all returned error values using two helpers Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Simplify use of helpers Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Satisfy linter Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
2022-07-19 01:58:52 -07:00
func (t *timestampTracker) UpdateMetadata(_ storage.SeriesRef, _ labels.Labels, _ metadata.Metadata) (storage.SeriesRef, error) {
// TODO: Add and increment a `metadata` field when we get around to wiring metadata in remote_write.
// UpadteMetadata is no-op for remote write (where timestampTracker is being used) for now.
return 0, nil
}
func (t *timestampTracker) AppendCTZeroSample(_ storage.SeriesRef, _ labels.Labels, _, _ int64) (storage.SeriesRef, error) {
// AppendCTZeroSample is no-op for remote-write for now.
return 0, nil
}
// Commit implements storage.Appender.
func (t *timestampTracker) Commit() error {
t.writeStorage.samplesIn.incr(t.samples + t.exemplars + t.histograms)
samplesIn.Add(float64(t.samples))
Add Exemplar Remote Write support (#8296) * Write exemplars to the WAL and send them over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update example for exemplars, print data in a more obvious format. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add metrics for remote write of exemplars. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix incorrect slices passed to send in remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * We need to unregister the new metrics. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> * Order of exemplar append vs write exemplar to WAL needs to change. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Condense sample/exemplar delivery tests to parameterized sub-tests Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename test methods for clarity now that they also handle exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename counter variable. Fix instances where metrics were not updated correctly Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Add exemplars to LoadWAL benchmark Signed-off-by: Callum Styan <callumstyan@gmail.com> * last exemplars timestamp metric needs to convert value to seconds with ms precision Signed-off-by: Callum Styan <callumstyan@gmail.com> * Process exemplar records in a separate go routine when loading the WAL. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments related to clarifying comments and variable names. Also refactor sample/exemplar to enqueue prompb types. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Regenerate types proto with comments, update protoc version again. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Put remote write of exemplars behind a feature flag. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address some of Ganesh's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Move exemplar remote write feature flag to a config file field. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address Bartek's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Don't allocate exemplar buffers in queue_manager if we're not going to send exemplars over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add ValidateExemplar function, validate exemplars when appending to head and log them all to WAL before adding them to exemplar storage. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address more reivew comments from Ganesh. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add exemplar total label length check. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address a few last review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> Co-authored-by: Martin Disibio <mdisibio@gmail.com>
2021-05-06 13:53:52 -07:00
exemplarsIn.Add(float64(t.exemplars))
histogramsIn.Add(float64(t.histograms))
t.highestRecvTimestamp.Set(float64(t.highestTimestamp / 1000))
2017-05-10 02:44:13 -07:00
return nil
}
// Rollback implements storage.Appender.
func (*timestampTracker) Rollback() error {
2017-05-10 02:44:13 -07:00
return nil
}