31 commits

Author	SHA1	Message	Date
György Krajcsovits	06a8886b94	Native histograms: define behavior when rate is null. ... Histogram quantile returns NaN in this case, which might be surprising, so add a unit test that clarifies that this is intentional. Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>	2024-08-12 10:40:21 +02:00
Charles Korn	424cefcf5e	Fix "cannot reduce resolution to custom buckets schema" panic in rate over native histograms with mix of custom and exponential buckets ... Signed-off-by: Charles Korn <charles.korn@grafana.com>	2024-08-07 14:45:02 +10:00
Björn Rabenstein	ee5bba07c0	Merge pull request #14413 from prometheus/beorn7/promql ... promql: more Kahan summation (avg) and less incremental mean calculation (avg, avg_over_time)	2024-08-06 19:56:32 +02:00
Charles Korn	aadec25faf	promql: Fix issue where some native histogram-related annotations are not emitted by rate (#14575) ... Signed-off-by: Charles Korn <charles.korn@grafana.com>	2024-08-06 09:10:40 +01:00
beorn7	c39776c5b5	promql: Add NHCB tests ... This adds equivalent NHCB tests to the existing classic histogram tests. Signed-off-by: beorn7 <beorn@grafana.com>	2024-07-16 12:20:43 +02:00
beorn7	cff0429b1a	promql: make avg_over_time faster and more precise ... Same idea as for the avg aggregator before: Most of the time, there is no overflow, so we don't have to revert to the more expensive and less precise incremental calculation of the mean value. Signed-off-by: beorn7 <beorn@grafana.com>	2024-07-10 19:20:24 +02:00
beorn7	c46074f4dd	promql: make avg aggregation more precise and less expensive ... The basic idea here is that the previous code was always doing incremental calculation of the mean value, which is more costly and can be less precise. It protects against overflows, but in most cases, an overflow doesn't happen anyway. The other idea applied here is to expand on #14074, where Kahan summation was applied to sum(). With this commit, the average is calculated in a conventional way (adding everything up and divide in the end) as long as the sum isn't overflowing float64. This is combined with Kahan summation so that the avg aggregation, in most cases, is really equivalent to the sum aggregation with a following division (which is the user's expectation as avg is supposed to be syntactic sugar for sum with a following divison). If the sum hits ±Inf, the calculation reverts to incremental calculation of the mean value. Kahan summation is also applied here, although it cannot fully compensate for the numerical errors introduced by the incremental mean calculation. (The tests added in this commit would fail if incremental mean calculation was always used.) Signed-off-by: beorn7 <beorn@grafana.com>	2024-07-10 19:20:24 +02:00
darshanime	bd4ea118e9	Allow durations for number rule ... Signed-off-by: darshanime <deathbullet@gmail.com>	2024-07-10 15:50:22 +02:00
darshanime	cfad8ff3b2	Deprecate duration token ... Signed-off-by: darshanime <deathbullet@gmail.com>	2024-07-10 15:49:58 +02:00
darshanime	8c8860d2d6	Allow number literals as duration ... Signed-off-by: darshanime <deathbullet@gmail.com>	2024-07-10 15:49:30 +02:00
Filip Petkovski	acb6c1ae4b	Fix decoding buckets for native histograms in binops ... The optimizer which detects cases where histogram buckets can be skipped does not take into account binary expressions. This can lead to buckets not being decoded if a metric is used with both histogram_fraction/quantile and histogram_sum/count in the same expression. Signed-off-by: Filip Petkovski <filip.petkovsky@gmail.com>	2024-07-10 11:55:29 +02:00
JuanJo Ciarlante	c94c5b64c3	feat: add limitk() and limit_ratio() operators (#12503) ... * rebase 2024-07-01, picks previous renaming to `limitk()` and `limit_ratio()` Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * gofumpt -d -extra Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * more lint fixes Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * more lint fixes+ Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * put limitk() and limit_ratio() behind --enable-feature=promql-experimental-functions Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * EnableExperimentalFunctions for TestConcurrentRangeQueries() also Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * use testutil.RequireEqual to fix tests, WIP equivalent thingie for require.Contains Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * lint fix Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * moar linting Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * rebase 2024-06-19 Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * re-add limit(2, metric) testing for N=2 common series subset Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * move `ratio = param` to default switch case, for better readability Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * gofumpt -d -extra util/testutil/cmp.go Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * early break when reaching k elems in limitk(), should have always been so (!) Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * small typo fix Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * no-change small break-loop rearrange for readability Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * remove IsNan(ratio) condition in switch-case, already handled as input validation Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * no-change adding some comments Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * no-change simplify fullMatrix() helper functions used for tests Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * add `limitk(-1, metric)` testcase, which is handled as any k < 1 case Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * engine_test.go: no-change create `requireCommonSeries() helper func (moving code into it) for readability Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * rebase 2024-06-21 Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * engine_test.go: HAPPY NOW about its code -> reorg, create and use simpleRangeQuery() function, less lines and more readable ftW \o/ Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * move limitk(), limit_ratio() testing to promql/promqltest/testdata/limit.test Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * remove stale leftover after moving tests from engine_test.go to testdata/ Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * fix flaky `limit_ratio(0.5, ...)` test case Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * Update promql/engine.go Co-authored-by: Julius Volz <julius.volz@gmail.com> Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * Update promql/engine.go Co-authored-by: Julius Volz <julius.volz@gmail.com> Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * Update promql/engine.go Co-authored-by: Julius Volz <julius.volz@gmail.com> Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * fix AddRatioSample() implementation to use a single conditional (instead of switch/case + fallback return) Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * docs/querying/operators.md: document r < 0 Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * add negative limit_ratio() example to docs/querying/examples.md Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * move more extensive docu examples to docs/querying/operators.md Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * typo Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * small docu fix for poor-mans-normality-check, add it to limit.test ;) Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * limit.test: expand "Poor man's normality check" to whole eval range Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * restore mistakenly removed existing small comment Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * expand poors-man-normality-check case(s) Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * Revert "expand poors-man-normality-check case(s)" This reverts commit f69e1603b2ebe69c0a100197cfbcf6f81644b564, indeed too flaky 0:) Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * remove humor from docs/querying/operators.md Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * fix signoff Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * add web/ui missing changes Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * expand limit_ratio test cases, cross-fingering they'll not be flaky Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * remove flaky test Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * add missing warnings.Merge(ws) in instant-query return shortcut Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * add missing LimitK||LimitRatio case to codemirror-promql/src/parser/parser.ts Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * fix ui-lint Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> * actually fix returned warnings :] Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> --------- Signed-off-by: JuanJo Ciarlante <juanjosec@gmail.com> Co-authored-by: Julius Volz <julius.volz@gmail.com>	2024-07-03 22:18:57 +02:00
Ganesh Vernekar	3d54bcc018	Merge pull request #14362 from charleskorn/charleskorn/sum-infinity	2024-07-03 01:05:03 -04:00
Charles Korn	fd6bdf5230	Fix issue where summation of +/- infinity returns NaN instead of infinity ... Signed-off-by: Charles Korn <charles.korn@grafana.com>	2024-06-28 11:26:54 +10:00
Björn Rabenstein	2e58d46522	Merge pull request #13662 from prometheus/nhcb ... Native histograms custom buckets storage	2024-06-27 21:44:20 +02:00
Bryan Boreham	b6aba4ff14	Merge pull request #14074 from bboreham/kahan-sum-sum ... [ENHANCEMENT] PromQL: use Kahan summation for sum()	2024-06-24 11:13:26 +01:00
Jeanette Tan	dda5f48c9e	Merge branch 'main' into nhcb-review-2	2024-06-20 22:50:00 +08:00
Jeanette Tan	fc9dc72028	remove eval_with_nhcb ... Signed-off-by: Jeanette Tan <jeanette.tan@grafana.com>	2024-06-20 22:49:00 +08:00
Jeanette Tan	a6d788b1be	update missed suggested change from code review ... Signed-off-by: Jeanette Tan <jeanette.tan@grafana.com>	2024-06-20 22:49:00 +08:00
Charles Korn	aeec30f082	Convert TestTimestampFunction_StepsMoreOftenThanSamples ... Signed-off-by: Charles Korn <charles.korn@grafana.com>	2024-06-17 16:56:56 +10:00
Charles Korn	987fa5c6a2	Convert range query test cases to test scripting language ... Signed-off-by: Charles Korn <charles.korn@grafana.com>	2024-06-17 16:43:01 +10:00
Jeanette Tan	14f8dded39	Merge branch 'main' into nhcb ... Signed-off-by: Jeanette Tan <jeanette.tan@grafana.com>	2024-06-07 19:17:14 +08:00
beorn7	c7fdfe8004	promql: Add tests for histogram counter reset only in bucket ... This also exercises the "fast path" (only decoding count and sum), i.e. where the counter reset isn't visible at all in the decoded data. Signed-off-by: beorn7 <beorn@grafana.com>	2024-06-06 17:47:38 +02:00
Jeanette Tan	f028496133	Merge branch 'main' into nhcb ... Signed-off-by: Jeanette Tan <jeanette.tan@grafana.com>	2024-05-14 16:20:15 +08:00
Neeraj Gartia	661856cb65	removes the added tests from engine_test.go ... Signed-off-by: Neeraj Gartia <neerajgartia211002@gmail.com>	2024-05-13 22:58:25 +05:30
Neeraj Gartia	6119124d0e	some nits ... Signed-off-by: Neeraj Gartia <neerajgartia211002@gmail.com>	2024-05-13 22:55:38 +05:30
Neeraj Gartia	adf5a36c1e	adds test for sum, count, stddev, stdvar, quantile and fraction func to promql testing framework ... Signed-off-by: Neeraj Gartia <neerajgartia211002@gmail.com>	2024-05-13 22:55:38 +05:30
Neeraj Gartia	8b838a05d9	adds test for native histogram rate func in promql testing framework ... Signed-off-by: Neeraj Gartia <neerajgartia211002@gmail.com>	2024-05-13 22:55:38 +05:30
Neeraj Gartia	548bd9d6fb	adds TestNativeHistogramRate func to promql test framework ... Signed-off-by: Neeraj Gartia <neerajgartia211002@gmail.com>	2024-05-13 22:55:38 +05:30
Bryan Boreham	ea82b49c33	[ENHANCEMENT] PromQL: use Kahan summation for sum() ... This can give a more precise result, by keeping a separate running compensation value to accumulate small errors. See https://en.wikipedia.org/wiki/Kahan_summation_algorithm Signed-off-by: Bryan Boreham <bjboreham@gmail.com>	2024-05-09 14:29:38 +01:00
Bryan Boreham	11b27d5d22	test: move test files into new promqltest package ... So that promql package does not bring in test-only dependencies. Signed-off-by: Bryan Boreham <bjboreham@gmail.com>	2024-05-08 13:42:55 +01:00