There are many more (mostly finalizers like Close/Stop/etc.), but most of
the others seemed like one couldn't do much about them anyway.
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* adding information about the health and errors for Rules
adding Health() and LastError() to the Rule interface. This will allow
us to easily surface information about rules.
Signed-off-by: noqcks <benny@noqcks.io>
* updating rules.html with fields for Rule errors and health state
Signed-off-by: noqcks <benny@noqcks.io>
* fix code comment grammar & access Rule health/error info using a mutex
Signed-off-by: noqcks <benny@noqcks.io>
* s/Errors/Error/ in rules.html to remain consistent with targets.html
Signed-off-by: noqcks <benny@noqcks.io>
* adding periods to code comments in reporting/alerting
Signed-off-by: noqcks <benny@noqcks.io>
* putting health/error below mutex in struct field
Signed-off-by: noqcks <benny@noqcks.io>
Previously it would set no preconditions and check no postconditions,
as the `groups` member was empty.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
This adds a parameter to the storage selection interface which allows
query engine(s) to pass information about the operations surrounding a
data selection.
This can for example be used by remote storage backends to infer the
correct downsampling aggregates that need to be provided.
* Use testutil in rules subpackage
* Fix manager test
* Use testutil in rules subpackage
* Fix manager test
* Fix rebase
* Change to testutil for applyConfig tests
* Re-add contexts to storage.Storage.Querier()
These are needed when replacing the storage by a multi-tenant
implementation where the tenant is stored in the context.
The 1.x query interfaces already had contexts, but they got lost in 2.x.
* Convert promql.Engine to use native contexts
Clicking on a rule, either the name or the expression, opens the rule
result (or the corresponding expression, repsectively) in the
expression browser. This should by default happen in the console tab,
as, more often than not, displaying it in the graph tab runs into a
timeout.
* Move fingerprint to Hash()
* Move away from tsdb.MultiError
* 0777 -> 0666 for files
* checkOverflow of extra fields
Signed-off-by: Goutham Veeramachaneni <cs14btech11014@iith.ac.in>
Usually rules don't more around, and if they do it's likely
that rules/alerts with the same name stay in the same order.
If rules/alerts with the same name are added/removed this
could cause a blip for one cycle, but this is unavoidable
without requiring rule and alert names to be unique - which we don't
want to do.
In case the execution of all rules takes longer than the configured rule
evaluation interval, one or more iterations will be skipped. This needs
to be visible to the opterator.
This is based on https://github.com/prometheus/prometheus/pull/1997.
This adds contexts to the relevant Storage methods and already passes
PromQL's new per-query context into the storage's query methods.
The immediate motivation supporting multi-tenancy in Frankenstein, but
this could also be used by Prometheus's normal local storage to support
cancellations and timeouts at some point.
For Weaveworks' Frankenstein, we need to support multitenancy. In
Frankenstein, we initially solved this without modifying the promql
package at all: we constructed a new promql.Engine for every
query and injected a storage implementation into that engine which would
be primed to only collect data for a given user.
This is problematic to upstream, however. Prometheus assumes that there
is only one engine: the query concurrency gate is part of the engine,
and the engine contains one central cancellable context to shut down all
queries. Also, creating a new engine for every query seems like overkill.
Thus, we want to be able to pass per-query contexts into a single engine.
This change gets rid of the promql.Engine's built-in base context and
allows passing in a per-query context instead. Central cancellation of
all queries is still possible by deriving all passed-in contexts from
one central one, but this is now the responsibility of the caller. The
central query context is now created in main() and passed into the
relevant components (web handler / API, rule manager).
In a next step, the per-query context would have to be passed to the
storage implementation, so that the storage can implement multi-tenancy
or other features based on the contextual information.
These tests have been added after the /graph changes and therefore
already test the new syntax.
This commit has to be reverted together with the previous one to get
back to the old new state. *sigh*
So far, out-of-order samples during rule evaluation were not logged,
and neither scrape health samples. The latter are unlikely to cause
any errors. That's why I'm logging them always now. (It's alway highly
irregular should it happen.) For rules, I have used the same plumbing
as for samples, just with a different wording in the message to mark
them as a result of rule evaluation.
The chunk encoding was hardcoded there because it mostly doesn't
matter what encoding is chosen in that test. Since type 1 is
battle-hardened enough, I'm switching to type 2 here so that we can
catch unexpected problems as a byproduct. My expectation is that the
chunk encoding doesn't matter anyway, as said, but then "unexpected
problems" contains the word "unexpected".
This considers static labels in the equality of alerts to
avoid falsely copying state from a different alert definition with
the same name across reloads.
To be safe, it also copies the state map rather than just its pointer
so that remaining collisions disappear after one evaluation interval.
This gives up on the idea to communicate throuh the Append() call (by
either not returning as it is now or returning an error as
suggested/explored elsewhere). Here I have added a Throttled() call,
which has the advantage that it can be called before a whole _batch_
of Append()'s. Scrapes will happen completely or not at all. Same for
rule group evaluations. That's a highly desired behavior (as discussed
elsewhere). The code is even simpler now as the whole ingestion buffer
could be removed.
Logging of throttled mode has been streamlined and will create at most
one message per minute.
It's actually happening in several places (and for flags, we use the
standard Go time.Duration...). This at least reduces all our
home-grown parsing to one place (in model).
When an evaluation group runs initially, it waits a deterministic
amount of time. During that time it also has to accept
a termination singnal so shutdown doesn't hang during the first
evaluation iteration after a configuration reload.
Fixes#1307
This is with `golint -min_confidence=0.5`.
I left several lint warnings untouched because they were either
incorrect or I felt it was better not to change them at the moment.
This moves the concern of resolving the files relative to the config
file into the configuration loading itself.
It also fixes#921 which did not load the cert and token files relatively.
Besides fixing https://github.com/prometheus/prometheus/issues/805 by
making the entire externally reachable server URL configurable, this
adds tests for the "globalURL" template function and makes it easier to
test other such functions in the future.
This breaks the `web.Hostname` flag (and introduces `web.external-url`).
This flag is likely only used by few users, so I hope that's
justifiable.
Fixes https://github.com/prometheus/prometheus/issues/805
Changes to the UI:
- "Active Since" timestamps are now human-readable.
- Alerting rules are now pretty-printed better.
- Labels are no longer just strings, but alert bubbles (like we do on
the status page for base labels).
- Alert states and target health states are now capitalized in the
presentation layer rather than at the source.
This change is conceptually very simple, although the diff is large. It
switches logging from "github.com/golang/glog" to
"github.com/prometheus/log", while not actually changing any log
messages. V(1)-style logging has been changed to be log.Debug*().
With this commit, sending SIGHUP to the Prometheus process will reload
and apply the configuration file. The different components attempt
to handle failing changes gracefully.
This commits renames the RuleManager to Manager as the package
name is 'rules' now. The unused layer of abstraction of the
RuleManager interface is removed.
The one central sample ingestion channel has caused a variety of
trouble. This commit removes it. Targets and rule evaluation call an
Append method directly now. To incorporate multiple storage backends
(like OpenTSDB), storage.Tee forks the Append into two different
appenders.
Note that the tsdb queue manager had its own queue anyway. It was a
queue after a queue... Much queue, so overhead...
Targets have their own little buffer (implemented as a channel) to
avoid stalling during an http scrape. But a new scrape will only be
started once the old one is fully ingested.
The contraption of three pipelined ingesters was removed. A Target is
an ingester itself now. Despite more logic in Target, things should be
less confusing now.
Also, remove lint and vet warnings in ast.go.
Unary expressions cause parsing errors if they are done in the lexer
by tokenizing them into the number.
This fix moves unary expressions to the parser.
This commits implements the OR operation between two vectors.
Vector matching using the ON clause is added to limit the set of
labels that define a match between two elements. Group modifiers
(GROUP_LEFT/GROUP_RIGHT) to request many-to-one matching are added.
This adds support for scientific notation in the expression language, as
well as for all possible literal forms of +Inf/-Inf/NaN.
TODO: Keep enough state in the parser/lexer to distinguish contexts in
which "Inf", "NaN", etc. should be parsed as a number vs. parsed as a
label name. Currently, foo{nan="bar"} would be a syntax error. However,
that is an existing bug for all our reserved words. E.g. foo{sum="bar"}
is a syntax error as well. This should be fixed separately.
Since we are now getting really deep into floating point calculation,
the tests had to take into account the precision loss. Since the rule
tests are based on direct line matching in the output, implementing
the "almost equal" semantics was pretty cumbersome, but here we are.
This allows changing the time offset for individual instant and range
vectors in a query.
For example, this returns the value of `foo` 5 minutes in the past
relative to the current query evaluation time:
foo offset 5m
Note that the `offset` modifier always needs to follow the selector
immediately. I.e. the following would be correct:
sum(foo offset 5m) // GOOD.
While the following would be *incorrect*:
sum(foo) offset 5m // INVALID.
The same works for range vectors. This returns the 5-minutes-rate that
`foo` had a week ago:
rate(foo[5m] offset 1w)
This change touches the following components:
* Lexer/parser: additions to correctly parse the new `offset`/`OFFSET`
keyword.
* AST: vector and matrix nodes now have an additional `offset` field.
This is used during their evaluation to adjust query and result times
appropriately.
* Query analyzer: now works on separate sets of ranges and instants per
offset. Isolating different offsets from each other completely in this
way keeps the preloading code relatively simple.
No storage engine changes were needed by this change.
The rules tests have been changed to not probe the internal
implementation details of the query analyzer anymore (how many instants
and ranges have been preloaded). This would also become too cumbersome
to test with the new model, and measuring the result of the query should
be sufficient.
This fixes https://github.com/prometheus/prometheus/issues/529
This fixed https://github.com/prometheus/promdash/issues/201
This is related to #454. Queries now timeout after a duration set by
the -query.timeout flag. The TotalEvalTimer is now started/stopped
inside any of the ast.Eval* functions.
The 2nd isCounter argument to delta is ugly, make it optional as the first step
of deprecating it. This will makes delta only ever applied to gauges.
Add a deriv function to calculate the least squares
slope of a gauge. This is more useful for prediction than delta,
as it isn't as heavily influenced by outliers at the boundaries.
- Move CONTRIBUTORS.md to the more common AUTHORS.
- Added the required NOTICE file.
- Changed "Prometheus Team" to "The Prometheus Authors".
- Reverted the erroneous changes to the Apache License.
It turned out in the end, that only drop_common_metrics() produced any
erroneous output in the old system. The second expression in the test
("sum(testmetric) keeping_extra") already worked in the old code, but
why not keep it in...
The way to test ranged evaluations is a bit clumsy so far, so I want to
build a nicer test framework in the end, where all the test cases can be
specified as text files which specify desired inputs, outputs, query
step widths, etc.
Change-Id: I821859789e69b8232bededf670a1b76e9e8c8ca4
Essentially:
- Remove unused code.
- Make it 'go vet' clean. The only remaining warnings are in generated code.
- Make it 'golint' clean. The only remaining warnings are in gerenated code.
- Smoothed out same minor things.
Change-Id: I3fe5c1fbead27b0e7a9c247fee2f5a45bc2d42c6
- Delete unneeded file view_adapter.go.
- Assessed that we still need the fingerprints in nodes
(to create iterators).
- Turned numMemChunkDescs into a metric.
Change-Id: I29be963c795a075ec00c095f76bf26405535609d
A common problem in Prometheus alerting is to detect when no timeseries
exist for a given metric name and label combination. Unfortunately,
Prometheus alert expressions need to be of vector type, and
"count(nonexistent_metric)" results in an empty vector, yielding no
output vector elements to base an alert on. The newly introduced
absent() function solves this issue:
ALERT FooAbsent IF absent(foo{job="myjob"}) [...]
absent() has the following behavior:
- if the vector passed to it has any elements, it returns an empty
vector.
- if the vector passed to it has no elements, it returns a 1-element
vector with the value 1.
In the second case, absent() tries to be smart about deriving labels of
the 1-element output vector from the input vector:
absent(nonexistent{job="myjob"}) => {job="myjob"}
absent(nonexistent{job="myjob",instance=~".*"}) => {job="myjob"}
absent(sum(nonexistent{job="myjob"})) => {}
That is, if the passed vector is a literal vector selector, it takes all
"=" label matchers as the basis for the output labels, but ignores all
non-equals or regex matchers. Also, if the passed vector results from a
non-selector expression, no labels can be derived.
Change-Id: I948505a1488d50265ab5692a3286bd7c8c70cd78
After many transformations, it doesn't make sense to keep the metric
names, since the result of the transformation is no longer that metric.
This drops the metric name after such transformations and makes the web
UI deal well with missing metric names.
This depends on the current branch on the following things:
- prometheus/client_golang needs to be at
e237cf15c6
in branch "julius/int-fingerprints" (to be merged with new storage)
- prometheus/promdash needs to be at
dd7691c9c2
Change-Id: Ib3c8cad8d647d9854e8c653c424b8c235ccc231d
This removes the dependancy on C leveldb and snappy.
It also takes care of fewer dependencies as they would
anyway not work on any non-Debian, non-Brew system.
Change-Id: Ia70dce1ba8a816a003587927e0b3a3f8ad2fd28c
In addition to the existing by-clause syntax:
sum(<expression>) by (<labels>) [keeping_extra]
...this allows the following new syntax:
sum by (<labels>) [keeping_extra] (<expression>)
Both orderings may be used in a single expression. It is up to the users
to establish guidelines around their usage.
Change-Id: Iba10c9cc5fb6ac62edfcf246d281473e82467992
This allows the following expression syntaxes for selecting timeseries:
foo (already valid before)
foo{} (already valid before)
{job="prometheus"} (new, select all timeseries for job "prometheus")
Omitting both the metric name *and* any label matchers ("" or "{}") will
still yield a syntax error.
To get all timeseries, you could do:
{__name__=~".*"}
or, without relying on knowledge about __metric__:
{job=~".*"}
Change-Id: Ifee000b9ac0184ef6ced18411069c7f2699a2dda
- Staleness delta is no a proper function parameter and not replicated
from package ast.
- Named type 'chunks' replaced by explicit '[]chunk' to avoid confusion.
- For the same reason, replaced 'chunkDescs' by '[]*chunkDescs'.
- Verified that math.Modf is not a speed enhancement over conversion
(actually 5x slower).
- Renamed firstTimeField, lastTimeField into chunkFirstTime and
chunkLastTime.
- Verified unpin() is sufficiently goroutine-safe.
- Decided not to update archivedFingerprintToTimeRange upon series
truncation and added a rationale why.
Change-Id: I863b8d785e5ad9f71eb63e229845eacf1bed8534
To achieve O(log n * k) runtime, this uses a heap to track the current
bottom-k or top-k elements while iterating over the full set of
available elements.
It would be possible to reuse more code between topk and bottomk, but I
decided for some more duplication for the sake of clarity.
This fixes https://github.com/prometheus/prometheus/issues/399
Change-Id: I7487ddaadbe7acb22ca2cf2283ba6e7915f2b336
- Always spell out the time unit (e.g. milliseconds instead of ms).
- Remove "_total" from the names of metrics that are not counters.
- Make use of the "Namespace" and "Subsystem" fields in the options.
- Removed the "capacity" facet from all metrics about channels/queues.
These are all fixed via command line flags and will never change
during the runtime of a process. Also, they should not be part of
the same metric family. I have added separate metrics for the
capacity of queues as convenience. (They will never change and are
only set once.)
- I left "metric_disk_latency_microseconds" unchanged, although that
metric measures the latency of the storage device, even if it is not
a spinning disk. "SSD" is read by many as "solid state disk", so
it's not too far off. (It should be "solid state drive", of course,
but "metric_drive_latency_microseconds" is probably confusing.)
- Brian suggested to not mix "failure" and "success" outcome in the
same metric family (distinguished by labels). For now, I left it as
it is. We are touching some bigger issue here, especially as other
parts in the Prometheus ecosystem are following the same
principle. We still need to come to terms here and then change
things consistently everywhere.
Change-Id: If799458b450d18f78500f05990301c12525197d3
Add a function to bypass the new auto-escaping.
Add a function to workaround go's templates only allowing passing in one argument.
Change-Id: Id7aa3f95e7c227692dc22108388b1d9b1e2eec99
Move rulemanager to it's own package to break cicrular dependency.
Make NewTestTieredStorage available to tests, remove duplication.
Change-Id: I33b321245a44aa727bfc3614a7c9ae5005b34e03
This was initially motivated by wanting to distribute the rule checker
tool under `tools/rule_checker`. However, this was not possible without
also distributing the LevelDB dynamic libraries because the tool
transitively depended on Levigo:
rule checker -> query layer -> tiered storage layer -> leveldb
This change separates external storage interfaces from the
implementation (tiered storage, leveldb storage, memory storage) by
putting them into separate packages:
- storage/metric: public, implementation-agnostic interfaces
- storage/metric/tiered: tiered storage implementation, including memory
and LevelDB storage.
I initially also considered splitting up the implementation into
separate packages for tiered storage, memory storage, and LevelDB
storage, but these are currently so intertwined that it would be another
major project in itself.
The query layers and most other parts of Prometheus now have notion of
the storage implementation anymore and just use whatever implementation
they get passed in via interfaces.
The rule_checker is now a static binary :)
Change-Id: I793bbf631a8648ca31790e7e772ecf9c2b92f7a0
This allows putting a scalar as the first argument of a binary operator
in which the second argument is a vector:
<scalar> <binop> <vector>
For example,
1 / http_requests_total
...will output a vector in which every sample value is 1 divided by the
respective input vector element.
This even works for filter binary operators now:
1 == http_requests_total
Returns a vector with all values set to 1 for every element in
http_requests_total whose initial value was 1.
Note: For filter binary operators, the resulting values are always taken
from the left-hand-side of the operation, no matter whether the scalar
or the vector argument is the left-hand-side. That is,
1 != http_requests_total
...will set all result vector sample values to 1, although these are
exactly the sample elements that were != 1 in the input vector.
If you want to just filter elements without changing their sample
values, you still need to do:
http_requests_total != 1
The new filter form is a bit exotic, and so probably won't be used
often. But it was easier to implement it than disallow it completely or
change its behavior.
Change-Id: Idd083f2bd3a1219ba1560cf4ace42f5b82e797a5
There are four label-matching ops for selecting timeseries now:
- Equal: =
- NotEqual: !=
- RegexMatch: =~
- RegexNoMatch: !~
Instead of looking up labels by a simple clientmodel.LabelSet (basically
an equals op for every key/value pair in the set), timeseries
fingerprint selection is now done via a list of metric.LabelMatchers.
Change-Id: I510a83f761198e80946146770ebb64e4abc3bb96
The initial impetus for this was that it made unmarshalling sample
values much faster.
Other relevant benchmark changes in ns/op:
Benchmark old new speedup
==================================================================
BenchmarkMarshal 179170 127996 1.4x
BenchmarkUnmarshal 404984 132186 3.1x
BenchmarkMemoryGetValueAtTime 57801 50050 1.2x
BenchmarkMemoryGetBoundaryValues 64496 53194 1.2x
BenchmarkMemoryGetRangeValues 66585 54065 1.2x
BenchmarkStreamAdd 45.0 75.3 0.6x
BenchmarkAppendSample1 1157 1587 0.7x
BenchmarkAppendSample10 4090 4284 0.95x
BenchmarkAppendSample100 45660 44066 1.0x
BenchmarkAppendSample1000 579084 582380 1.0x
BenchmarkMemoryAppendRepeatingValues 22796594 22005502 1.0x
Overall, this gives us good speedups in the areas where they matter
most: decoding values from disk and accessing the memory storage (which
is also used for views).
Some of the smaller append examples take minimally longer, but the cost
seems to get amortized over larger appends, so I'm not worried about
these. Also, we're currently not bottlenecked on the write path and have
plenty of other optimizations available in that area if it becomes
necessary.
Memory allocations during appends don't change measurably at all.
Change-Id: I7dc7394edea09506976765551f35b138518db9e8
Mostly, that means adding compliant doc strings to exported items.
Also, remove 'go vet' warnings where possible. (Some are unfortunately
not to avoid, arguably bugs in 'go vet'.)
Change-Id: I2827b6dd317492864c1383c3de1ea9eac5a219bb
MIN/MAX/SUM/AVG/COUNT aggregations will now by default drop all labels that are
not specifically part of a BY-clause, even if a label value is the same within
all timeseries of an aggregation group. The old behavior of keeping extra
labels may still be switched on by adding KEEPING_EXTRA to the end of an
aggregation statement:
sum(http_requests) by (job, method) keeping_extra
I'm open to better syntax/naming suggestions.
Change-Id: I21d3fe7af9e98552ce3dffa3ce7c0a4ba4c0b4a4
So far we've been using Go's native time.Time for anything related to sample
timestamps. Since the range of time.Time is much bigger than what we need, this
has created two problems:
- there could be time.Time values which were out of the range/precision of the
time type that we persist to disk, therefore causing incorrectly ordered keys.
One bug caused by this was:
https://github.com/prometheus/prometheus/issues/367
It would be good to use a timestamp type that's more closely aligned with
what the underlying storage supports.
- sizeof(time.Time) is 192, while Prometheus should be ok with a single 64-bit
Unix timestamp (possibly even a 32-bit one). Since we store samples in large
numbers, this seriously affects memory usage. Furthermore, copying/working
with the data will be faster if it's smaller.
*MEMORY USAGE RESULTS*
Initial memory usage comparisons for a running Prometheus with 1 timeseries and
100,000 samples show roughly a 13% decrease in total (VIRT) memory usage. In my
tests, this advantage for some reason decreased a bit the more samples the
timeseries had (to 5-7% for millions of samples). This I can't fully explain,
but perhaps garbage collection issues were involved.
*WHEN TO USE THE NEW TIMESTAMP TYPE*
The new clientmodel.Timestamp type should be used whenever time
calculations are either directly or indirectly related to sample
timestamps.
For example:
- the timestamp of a sample itself
- all kinds of watermarks
- anything that may become or is compared to a sample timestamp (like the timestamp
passed into Target.Scrape()).
When to still use time.Time:
- for measuring durations/times not related to sample timestamps, like duration
telemetry exporting, timers that indicate how frequently to execute some
action, etc.
*NOTE ON OPERATOR OPTIMIZATION TESTS*
We don't use operator optimization code anymore, but it still lives in
the code as dead code. It still has tests, but I couldn't get all of them to
pass with the new timestamp format. I commented out the failing cases for now,
but we should probably remove the dead code soon. I just didn't want to do that
in the same change as this.
Change-Id: I821787414b0debe85c9fffaeb57abd453727af0f
