Consider code like:
for i := 0; i < numTargets; i++ {
stopFuncs = append(stopFuncs, func() {
time.Sleep(i*20*time.Millisecond)
})
}
Because the loop variable i is shared by all closures,
all the stopFuncs sleep for numTargets*20 ms.
If the i were made per-iteration, as we are considering
for a future Go release, the stopFuncs would have sleep
durations ranging from 0 to (numTargets-1)*20 ms.
Two tests had code like this and were checking that the
aggregate sleep was at least numTargets*20 ms
("at least as long as the last target slept"). This is only true
today because i == numTarget during all the sleeps.
To keep the code working even if the semantics of this loop
change, this PR computes
d := time.Duration((i+1)*20) * time.Millisecond
outside the closure (but inside the loop body), and then each
closure has its own d. Now the sleeps range from 20 ms
to numTargets*20 ms, keeping the test passing
(and probably behaving closer to the intent of the test author).
The failure being fixed can be reproduced by using the current
Go development branch with
GOEXPERIMENT=loopvar go test
Signed-off-by: Russ Cox <rsc@golang.org>
Refactors textparser test to use a common test utility to create
protobuf representation from MetricFamily
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
Wiser coders than myself have come to the conclusion that a `switch`
statement is almost always superior to a statement that includes any
`else if`.
The exceptions that I have found in our codebase are just these two:
* The `if else` is followed by an additional statement before the next
condition (separated by a `;`).
* The whole thing is within a `for` loop and `break` statements are
used. In this case, using `switch` would require tagging the `for`
loop, which probably tips the balance.
Why are `switch` statements more readable?
For one, fewer curly braces. But more importantly, the conditions all
have the same alignment, so the whole thing follows the natural flow
of going down a list of conditions. With `else if`, in contrast, all
conditions but the first are "hidden" behind `} else if `, harder to
spot and (for no good reason) presented differently from the first
condition.
I'm sure the aforemention wise coders can list even more reasons.
In any case, I like it so much that I have found myself recommending
it in code reviews. I would like to make it a habit in our code base,
without making it a hard requirement that we would test on the CI. But
for that, there has to be a role model, so this commit eliminates all
`if else` occurrences, unless it is autogenerated code or fits one of
the exceptions above.
Signed-off-by: beorn7 <beorn@grafana.com>
We haven't updated golint-ci in our CI yet, but this commit prepares
for that.
There are a lot of new warnings, and it is mostly because the "revive"
linter got updated. I agree with most of the new warnings, mostly
around not naming unused function parameters (although it is justified
in some cases for documentation purposes – while things like mocks are
a good example where not naming the parameter is clearer).
I'm pretty upset about the "empty block" warning to include `for`
loops. It's such a common pattern to do something in the head of the
`for` loop and then have an empty block. There is still an open issue
about this: https://github.com/mgechev/revive/issues/810 I have
disabled "revive" altogether in files where empty blocks are used
excessively, and I have made the effort to add individual
`// nolint:revive` where empty blocks are used just once or twice.
It's borderline noisy, though, but let's go with it for now.
I should mention that none of the "empty block" warnings for `for`
loop bodies were legitimate.
Signed-off-by: beorn7 <beorn@grafana.com>
It took a `Labels` where the memory could be re-used, but in practice
this hardly ever benefitted. Especially after converting `relabel.Process`
to `relabel.ProcessBuilder`.
Comparing the parameter to `nil` was a bug; `EmptyLabels` is not `nil`
so the slice was reallocated multiple times by `append`.
Lastly `Builder.Labels()` now estimates that the final size will depend
on labels added and deleted.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Since the Target object was just created in this function, nobody else
has a reference to it and there are no concerns about it being modified
concurrently so we don't need to copy the value.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Includes a rewrite of `resolveConflictingExposedLabels` to use
`labels.Builder.Get`, which simplifies it considerably.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Scraping targets are synced by creating the full set, then adding/removing any which have changed.
This PR speeds up the process of creating the full set.
I added a benchmark for `TargetsFromGroup`; it uses configuration from a typical Kubernetes SD.
The crux of the change is to do relabeling inside labels.Builder instead of converting to labels.Labels and back again for every rule. The change is broken into several commits for easier review.
This is a breaking change to `scrape.PopulateLabels()`, but `relabel.Process` is left as-is, with a new `relabel.ProcessBuilder` option.
Common service discovery mechanisms such as Kubernetes can generate a
lot of target groups, so this function was allocating a lot of memory
which then immediately became garbage. Re-using the structures across
an entire Sync saves effort.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Save work converting to `Labels` then to `Builder`.
`PopulateLabels()` now takes as Builder as input.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
This makes all usage of maps in scrape.go consistent.
Also remove comment about unsafe strings, since we don't use them any
more in this package.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Extends Appender.AppendHistogram function to accept the FloatHistogram. TSDB supports appending, querying, WAL replay, for this new type of histogram.
Signed-off-by: Marc Tudurí <marctc@protonmail.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Add API endpoints for getting scrape pool names
This adds api/v1/scrape_pools endpoint that returns the list of *names* of all the scrape pools configured.
Having it allows to find out what scrape pools are defined without having to list and parse all targets.
The second change is adding scrapePool query parameter support in api/v1/targets endpoint, that allows to
filter returned targets by only finding ones for passed scrape pool name.
Both changes allow to query for a specific scrape pool data, rather than getting all the targets for all possible scrape pools.
The problem with api/v1/targets endpoint is that it returns huge amount of data if you configure a lot of scrape pools.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
* Add a scrape pool selector on /targets page
Current targets page lists all possible targets. This works great if you only have a few scrape pools configured,
but for systems with a lot of scrape pools and targets this slow things down a lot.
Not only does the /targets page load very slowly in such case (waiting for huge API response) but it also take
a long time to render, due to huge number of elements.
This change adds a dropdown selector so it's possible to select only intersting scrape pool to view.
There's also scrapePool query param that will open selected pool automatically.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
The `yolostring` routine was intended to avoid an allocation when
converting from a `[]byte` to a `string` for map lookup.
However, since 2014 Go has recognized this pattern and does not make
a copy of the data when looking up a map. So the unsafe code is not
necessary.
In line with this, constants like `scrapeHealthMetricName` also become
`[]byte`.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Patterned after `Chunk.Iterator()`: pass the old iterator in so it
can be re-used to avoid allocating a new object.
(This commit does not do any re-use; it is just changing all the method
signatures so re-use is possible in later commits.)
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
This reinstates the behavior of v2.39. The header got messed up in the
sparsehistogram when the change of the version in main was merged into
it (and the merge conflict had to be resolved).
I don't think the current state will actually break anyone, although
it is technically possible. I propose to merge this into the bugfix
branch in any case, but I think we can wait for other bugfixes before
cutting a v2.40.1. (Unless, of course, somebody reports an actual
breakage because of the header.)
Signed-off-by: beorn7 <beorn@grafana.com>
First of all, there was a typo: `encoding=delimited` was a left-over
in the `scrapeAcceptHeader`.
Second, the recently updated `version=1.0.0` prevents current versions
of client_golang to negotiate OpenMetrics, as they expect
`version=0.0.1` or no version at all. This commit adds, with lower
priority, the latter (no version at all) to the accept header.
Fixes#11540,
Signed-off-by: beorn7 <beorn@grafana.com>
And a few cases of `EmptyLabels()`.
Replacing code which assumes the internal structure of `Labels`.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Append metadata to the WAL
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Remove extra whitespace; Reword some docstrings and comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use RLock() for hasNewMetadata check
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use single byte for metric type in RefMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Update proposed WAL format for single-byte type metadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Address first round of review comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Amend description of metadata in wal.md
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Correct key used to retrieve metadata from cache
When we're setting metadata entries in the scrapeCace, we're using the
p.Help(), p.Unit(), p.Type() helpers, which retrieve the series name and
use it as the cache key. When checking for cache entries though, we used
p.Series() as the key, which included the metric name _with_ its labels.
That meant that we were never actually hitting the cache. We're fixing
this by utiling the __name__ internal label for correctly getting the
cache entries after they've been set by setHelp(), setType() or
setUnit().
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Put feature behind a feature flag
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Reorder WAL format document
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix CR comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Extract logic about changing metadata in an anonymous function
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Implement new proposed WAL format and amend relevant tests
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use 'const' for metadata field names
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Apply metadata to head memSeries in Commit, not in AppendMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add docstring and rename extracted helper in scrape.go
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix review comments around TestMetadata* tests
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Rebase with merged TSDB changes; fix duplicate definitions after rebase
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Remove leftover changes on db_test.go
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Rename feature flag
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Simplify updateMetadata helper function
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Remove extra newline
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* model/relabel: Add benchmark
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* model/relabel: re-use Builder across relabels
Saves memory allocations.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* labels.Builder: allow re-use of result slice
This reduces memory allocations where the caller has a suitable slice available.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* model/relabel: re-use source values slice
To reduce memory allocations.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Unwind one change causing test failures
Restore original behaviour in PopulateLabels, where we must not overwrite the input set.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* relabel: simplify values optimisation
Use a stack-based array for up to 16 source labels, which will be the
vast majority of cases.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* lint
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Append metadata to the WAL
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Remove extra whitespace; Reword some docstrings and comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use RLock() for hasNewMetadata check
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use single byte for metric type in RefMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Update proposed WAL format for single-byte type metadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Implementa MetadataAppender interface for the Agent
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Address first round of review comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Amend description of metadata in wal.md
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Correct key used to retrieve metadata from cache
When we're setting metadata entries in the scrapeCace, we're using the
p.Help(), p.Unit(), p.Type() helpers, which retrieve the series name and
use it as the cache key. When checking for cache entries though, we used
p.Series() as the key, which included the metric name _with_ its labels.
That meant that we were never actually hitting the cache. We're fixing
this by utiling the __name__ internal label for correctly getting the
cache entries after they've been set by setHelp(), setType() or
setUnit().
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Put feature behind a feature flag
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix AppendMetadata docstring
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Reorder WAL format document
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Change error message of AppendMetadata; Fix access of s.meta in AppendMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Reuse temporary buffer in Metadata encoder
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Only keep latest metadata for each refID during checkpointing
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix test that's referencing decoding metadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Avoid creating metadata block if no new metadata are present
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add tests for corrupt metadata block and relevant record type
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix CR comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Extract logic about changing metadata in an anonymous function
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Implement new proposed WAL format and amend relevant tests
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use 'const' for metadata field names
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Apply metadata to head memSeries in Commit, not in AppendMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add docstring and rename extracted helper in scrape.go
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add tests for tsdb-related cases
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix linter issues vol1
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix linter issues vol2
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix Windows test by closing WAL reader files
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use switch instead of two if statements in metadata decoding
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix review comments around TestMetadata* tests
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add code for replaying WAL; test correctness of in-memory data after a replay
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Remove scrape-loop related code from PR
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Address first round of comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Simplify tests by sorting slices before comparison
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix test to use separate transactions
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Empty out buffer and record slices after encoding latest metadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix linting issue
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Update calculation for DroppedMetadata metric
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Rename MetadataAppender interface and AppendMetadata method to MetadataUpdater/UpdateMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Reuse buffer when encoding latest metadata for each series
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix review comments; Check all returned error values using two helpers
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Simplify use of helpers
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Satisfy linter
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Send target and metadata cache in context (again)
The previous attempt was rolled back in #10590 due to memory issues.
`sl.parentCtx` and `sl.ctx` both had a copy of the cache and target info
in the previous attempt and it was hard to pin-point where the context
was being retained causing the memory increase.
I've experimented a bunch in #10627 to figure out that this approach doesn't
cause memory increase. Beyond that, just using this info in _any_ other context
is causing a memory increase.
The change fixed a bunch of long-standing in the OTel Collector that the
community was waiting on and release is blocked on a few downstream distrubutions
of OTel Collector waiting on a fix. I propose to merge this change in while
I investigate what is happening.
Signed-off-by: Goutham Veeramachaneni <gouthamve@gmail.com>
* Gate the change behind a manager option
Signed-off-by: Goutham Veeramachaneni <gouthamve@gmail.com>
* refactor: move from io/ioutil to io and os packages
* use fs.DirEntry instead of os.FileInfo after os.ReadDir
Signed-off-by: MOREL Matthieu <matthieu.morel@cnp.fr>
OTel Collector prints the following error when a target disappears:
```
2022-04-13T14:20:24.932-0400 warn scrape/scrape.go:1408 Stale append failed {"kind": "receiver", "name": "prometheus", "scrape_pool": "beep-boop", "target": "http://localhost:9090/metrics", "error": "transaction aborted"}
```
This `transaction aborted` error is returned by the custom appender that is
used by the collector when the context of the appender is cancelled:
b7bf11174e/receiver/prometheusreceiver/internal/otlp_transaction.go (L81-L82)
We call `endOfRunStaleness` after `sl.stop()` which cancels `sl.ctx`.
The other `.Appender()` calls use `parentCtx` for the same reason.
This hasn't come up so far because Prometheus' Appender implementation just
ignores the context passed.
Signed-off-by: Goutham Veeramachaneni <gouthamve@gmail.com>
Storing the scrape cache and the target (which also contains that cache)
is apparently causing hige memory increase. I think me might not control
the lifespan of the context enough, therefore old objects keep living in
memory for longer than needed.
Let's unblock the release and look for an alternative so that downstream
consumers can get access to that data.
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
* discovery: expose HTTP client options to discoverers
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* discovery/http: use HTTP client options for created client
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* scrape: use a list of HTTP client options instead of just dial context
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* discovery: rephrase comment
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* scrape: allow providing a custom Dialer for scraping
This commit extends config.ScrapeConfig with an optional field to
override how HTTP connections to targets are created. This field is not
set directly in Prometheus, and is only added for the convenience of
downstream importers.
Closes#9706
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* scrape: move custom dial function to scrape.Options
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
If reporting metrics fails due to reaching the limit, this makes the
target appear as UP in the UI, but the metrics are missing.
This commit bypasses that limit for report metrics.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
- Pick At... method via return value of Next/Seek.
- Do not clobber returned buckets.
- Add partial FloatHistogram suppert.
Note that the promql package is now _only_ dealing with
FloatHistograms, following the idea that PromQL only knows float
values.
As a byproduct, I have removed the histogramSeries metric. In my
understanding, series can have both float and histogram samples, so
that metric doesn't make sense anymore.
As another byproduct, I have converged the sampleBuf and the
histogramSampleBuf in memSeries into one. The sample type stored in
the sampleBuf has been extended to also contain histograms even before
this commit.
Signed-off-by: beorn7 <beorn@grafana.com>
This is to avoid copying the many fields of a histogram.Histogram all
the time.
This also fixes a bunch of formerly broken tests.
Signed-off-by: beorn7 <beorn@grafana.com>
This creates a new `model` directory and moves all data-model related
packages over there:
exemplar labels relabel rulefmt textparse timestamp value
All the others are more or less utilities and have been moved to `util`:
gate logging modetimevfs pool runtime
Signed-off-by: beorn7 <beorn@grafana.com>
* TSDB: demistify seriesRefs and ChunkRefs
The TSDB package contains many types of series and chunk references,
all shrouded in uint types. Often the same uint value may
actually mean one of different types, in non-obvious ways.
This PR aims to clarify the code and help navigating to relevant docs,
usage, etc much quicker.
Concretely:
* Use appropriately named types and document their semantics and
relations.
* Make multiplexing and demuxing of types explicit
(on the boundaries between concrete implementations and generic
interfaces).
* Casting between different types should be free. None of the changes
should have any impact on how the code runs.
TODO: Implement BlockSeriesRef where appropriate (for a future PR)
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* feedback
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* agent: demistify seriesRefs and ChunkRefs
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
A lot of this code was hacked together, literally during a
hackathon. This commit intends not to change the code substantially,
but just make the code obey the usual style practices.
A (possibly incomplete) list of areas:
* Generally address linter warnings.
* The `pgk` directory is deprecated as per dev-summit. No new packages should
be added to it. I moved the new `pkg/histogram` package to `model`
anticipating what's proposed in #9478.
* Make the naming of the Sparse Histogram more consistent. Including
abbreviations, there were just too many names for it: SparseHistogram,
Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in
general. Only add "Sparse" if it is needed to avoid confusion with
conventional Histograms (which is rare because the TSDB really has no notion
of conventional Histograms). Use abbreviations only in local scope, and then
really abbreviate (not just removing three out of seven letters like in
"Histo"). This is in the spirit of
https://github.com/golang/go/wiki/CodeReviewComments#variable-names
* Several other minor name changes.
* A lot of formatting of doc comments. For one, following
https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences
, but also layout question, anticipating how things will look like
when rendered by `godoc` (even where `godoc` doesn't render them
right now because they are for unexported types or not a doc comment
at all but just a normal code comment - consistency is queen!).
* Re-enabled `TestQueryLog` and `TestEndopints` (they pass now,
leaving them disabled was presumably an oversight).
* Bucket iterator for histogram.Histogram is now created with a
method.
* HistogramChunk.iterator now allows iterator recycling. (I think
@dieterbe only commented it out because he was confused by the
question in the comment.)
* HistogramAppender.Append panics now because we decided to treat
staleness marker differently.
Signed-off-by: beorn7 <beorn@grafana.com>
We are re-enabling HTTP 2 again. There has been a few bugfixes upstream
in go, and we have also enabled ReadIdleTimeout.
Fix#7588Fix#9068
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Allow to tune the scrape tolerance
In most of the classic monitoring use cases, a few milliseconds
difference can be omitted.
In Prometheus, a few millisecond difference can however make a big
difference.
Currently, Prometheus will ignore up to 2 ms difference in the
alignments.
It turns out that for users who can afford a 10ms difference, there is a
lot of resources and disk space to win, as shown in this graph, which
shows the bytes / samples over a production Prometheus server. You can
clearly see the switch from 2ms to 10ms tolerance.
This pull request enables the adjustment of the scrape timestamp
alignment tolerance.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Fix golint
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Refactor: extract function to make scrapeLoop for testing
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Add benchmarks for ScrapeLoopAppend
For Prometheus and OpenMetrics
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Create less garbage when parsing metrics
Exemplar escapes to heap due to being passed through text-parser
interface, but we can reduce the impact by hoisting it out of the loop
and resetting it after every use.
(Note the cost was paid on every line even when exemplars were disabled)
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Create less garbage when parsing OpenMetrics
After calling parseLVals() we always append the return value, so pass in
what we want to append it to and save garbage.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
This adds a new metric exposing per target scrape sample_limit value. Metrics are only exposed if extra-scrape-metrics feature flag is enabled.
scrape_sample_limit will make it easy to monitor and alert on targets getting close to configured sample_limit, which is important given than exceeding sample_limit results in the entire scrape results being rejected.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
Add a new built-in metric `scrape_timeout_seconds` to allow monitoring
of the ratio of scrape duration to the scrape timeout. Hide behind a
feature flag to avoid additional cardinality by default.
Signed-off-by: SuperQ <superq@gmail.com>
