This makes it more consistent with other command like import rules. We
don't have stricts rules and uniformity accross promtool unfortunately,
but I think it's better to only have the http config on relevant check
commands to avoid thinking Prometheus can e.g. check the config over the
wire.
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
There are a few tests that will run prometheus command.
This can test if there's already something listening on port :9090 since --web.listen-address defaults to 0.0.0.0:9090.
To fix that we can tell prometheus to use a random port on loopback interface.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
It took a `Labels` where the memory could be re-used, but in practice
this hardly ever benefitted. Especially after converting `relabel.Process`
to `relabel.ProcessBuilder`.
Comparing the parameter to `nil` was a bug; `EmptyLabels` is not `nil`
so the slice was reallocated multiple times by `append`.
Lastly `Builder.Labels()` now estimates that the final size will depend
on labels added and deleted.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Scraping targets are synced by creating the full set, then adding/removing any which have changed.
This PR speeds up the process of creating the full set.
I added a benchmark for `TargetsFromGroup`; it uses configuration from a typical Kubernetes SD.
The crux of the change is to do relabeling inside labels.Builder instead of converting to labels.Labels and back again for every rule. The change is broken into several commits for easier review.
This is a breaking change to `scrape.PopulateLabels()`, but `relabel.Process` is left as-is, with a new `relabel.ProcessBuilder` option.
Common service discovery mechanisms such as Kubernetes can generate a
lot of target groups, so this function was allocating a lot of memory
which then immediately became garbage. Re-using the structures across
an entire Sync saves effort.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Save work converting to `Labels` then to `Builder`.
`PopulateLabels()` now takes as Builder as input.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Dumping without any limit on the data being dumped will generate
a large amount of data. Also, sometimes it is necessary to dump
only a part of the data in order to change or transfer it.
This change allows to specify a part of the data to dump and
by default works same as before. (no public API change)
Signed-off-by: Amin Borjian <borjianamin98@outlook.com>
Extends Appender.AppendHistogram function to accept the FloatHistogram. TSDB supports appending, querying, WAL replay, for this new type of histogram.
Signed-off-by: Marc Tudurí <marctc@protonmail.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Instead of passing in a `ScratchBuilder` and `Labels`, just pass the
builder and the caller can extract labels from it. In many cases the
caller didn't use the Labels value anyway.
Now in `Labels.ScratchBuilder` we need a slightly different API: one
to assign what will be the result, instead of overwriting some other
`Labels`. This is safer and easier to reason about.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
This necessitates a change to the `tsdb.IndexReader` interface:
`index.Reader` is used from multiple goroutines concurrently, so we
can't have state in it.
We do retain a `ScratchBuilder` in `blockBaseSeriesSet` which is
iterator-like.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Patterned after `Chunk.Iterator()`: pass the old iterator in so it
can be re-used to avoid allocating a new object.
(This commit does not do any re-use; it is just changing all the method
signatures so re-use is possible in later commits.)
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Introduce out-of-order TSDB support
This implementation is based on this design doc:
https://docs.google.com/document/d/1Kppm7qL9C-BJB1j6yb6-9ObG3AbdZnFUBYPNNWwDBYM/edit?usp=sharing
This commit adds support to accept out-of-order ("OOO") sample into the TSDB
up to a configurable time allowance. If OOO is enabled, overlapping querying
are automatically enabled.
Most of the additions have been borrowed from
https://github.com/grafana/mimir-prometheus/
Here is the list ist of the original commits cherry picked
from mimir-prometheus into this branch:
- 4b2198d7ec
- 2836e5513f
- 00b379c3a5
- ff0dc75758
- a632c73352
- c6f3d4ab33
- 5e8406a1d4
- abde1e0ba1
- e70e769889
- df59320886
Co-authored-by: Jesus Vazquez <jesus.vazquez@grafana.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Dieter Plaetinck <dieter@grafana.com>
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* gofumpt files
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Add license header to missing files
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix OOO tests due to existing chunk disk mapper implementation
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix truncate int overflow
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Add Sync method to the WAL and update tests
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* remove useless sync
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Update minOOOTime after truncating Head
* Update minOOOTime after truncating Head
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix lint
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Add a unit test
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Load OutOfOrderTimeWindow only once per appender
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix OOO Head LabelValues and PostingsForMatchers
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix replay of OOO mmap chunks
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Remove unnecessary err check
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Prevent panic with ApplyConfig
Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Run OOO compaction after restart if there is OOO data from WBL
Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Apply Bartek's suggestions
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Refactor OOO compaction
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Address comments and TODOs
- Added a comment explaining why we need the allow overlapping
compaction toggle
- Clarified TSDBConfig OutOfOrderTimeWindow doc
- Added an owner to all the TODOs in the code
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Run go format
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix remaining review comments
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix tests
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Change wbl reference when truncating ooo in TestHeadMinOOOTimeUpdate
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix TestWBLAndMmapReplay test failure on windows
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Address most of the feedback
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Refactor the block meta for out of order
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix windows error
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix review comments
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Dieter Plaetinck <dieter@grafana.com>
Co-authored-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Add runtime config to control native histogram ingestion
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Make the config into a CLI flag
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Append metadata to the WAL
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Remove extra whitespace; Reword some docstrings and comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use RLock() for hasNewMetadata check
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use single byte for metric type in RefMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Update proposed WAL format for single-byte type metadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Address first round of review comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Amend description of metadata in wal.md
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Correct key used to retrieve metadata from cache
When we're setting metadata entries in the scrapeCace, we're using the
p.Help(), p.Unit(), p.Type() helpers, which retrieve the series name and
use it as the cache key. When checking for cache entries though, we used
p.Series() as the key, which included the metric name _with_ its labels.
That meant that we were never actually hitting the cache. We're fixing
this by utiling the __name__ internal label for correctly getting the
cache entries after they've been set by setHelp(), setType() or
setUnit().
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Put feature behind a feature flag
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Reorder WAL format document
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix CR comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Extract logic about changing metadata in an anonymous function
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Implement new proposed WAL format and amend relevant tests
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use 'const' for metadata field names
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Apply metadata to head memSeries in Commit, not in AppendMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add docstring and rename extracted helper in scrape.go
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix review comments around TestMetadata* tests
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Rebase with merged TSDB changes; fix duplicate definitions after rebase
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Remove leftover changes on db_test.go
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Rename feature flag
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Simplify updateMetadata helper function
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Remove extra newline
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* model/relabel: Add benchmark
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* model/relabel: re-use Builder across relabels
Saves memory allocations.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* labels.Builder: allow re-use of result slice
This reduces memory allocations where the caller has a suitable slice available.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* model/relabel: re-use source values slice
To reduce memory allocations.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Unwind one change causing test failures
Restore original behaviour in PopulateLabels, where we must not overwrite the input set.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* relabel: simplify values optimisation
Use a stack-based array for up to 16 source labels, which will be the
vast majority of cases.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* lint
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Append metadata to the WAL
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Remove extra whitespace; Reword some docstrings and comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use RLock() for hasNewMetadata check
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use single byte for metric type in RefMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Update proposed WAL format for single-byte type metadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Implementa MetadataAppender interface for the Agent
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Address first round of review comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Amend description of metadata in wal.md
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Correct key used to retrieve metadata from cache
When we're setting metadata entries in the scrapeCace, we're using the
p.Help(), p.Unit(), p.Type() helpers, which retrieve the series name and
use it as the cache key. When checking for cache entries though, we used
p.Series() as the key, which included the metric name _with_ its labels.
That meant that we were never actually hitting the cache. We're fixing
this by utiling the __name__ internal label for correctly getting the
cache entries after they've been set by setHelp(), setType() or
setUnit().
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Put feature behind a feature flag
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix AppendMetadata docstring
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Reorder WAL format document
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Change error message of AppendMetadata; Fix access of s.meta in AppendMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Reuse temporary buffer in Metadata encoder
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Only keep latest metadata for each refID during checkpointing
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix test that's referencing decoding metadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Avoid creating metadata block if no new metadata are present
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add tests for corrupt metadata block and relevant record type
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix CR comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Extract logic about changing metadata in an anonymous function
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Implement new proposed WAL format and amend relevant tests
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use 'const' for metadata field names
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Apply metadata to head memSeries in Commit, not in AppendMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add docstring and rename extracted helper in scrape.go
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add tests for tsdb-related cases
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix linter issues vol1
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix linter issues vol2
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix Windows test by closing WAL reader files
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use switch instead of two if statements in metadata decoding
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix review comments around TestMetadata* tests
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add code for replaying WAL; test correctness of in-memory data after a replay
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Remove scrape-loop related code from PR
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Address first round of comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Simplify tests by sorting slices before comparison
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix test to use separate transactions
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Empty out buffer and record slices after encoding latest metadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix linting issue
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Update calculation for DroppedMetadata metric
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Rename MetadataAppender interface and AppendMetadata method to MetadataUpdater/UpdateMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Reuse buffer when encoding latest metadata for each series
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix review comments; Check all returned error values using two helpers
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Simplify use of helpers
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Satisfy linter
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
This keeps the previous behaviour of printing details about duplicate
rules but doesn't exit with a fatal exit code unless turned on.
Signed-off-by: David Leadbeater <dgl@dgl.cx>
This moves prometheus_ready to the web package and links it with the ready variable that decides if HTTP requests should return 200 or 503.
This is a follow up change from #10682
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
When Prometheus starts it can take a long time before WAL is replayed and it can do anything useful. While it's starting it exposes metrics and other Prometheus servers can scrape it.
We do have alerts that fire if any Prometheus server is not ingesting samples and so far we've been dealing with instances that are starting for a long time by adding a check on Prometheus process uptime. Relying on uptime isn't ideal because the time needed to start depends on the number of metrics scraped, and so on the amount of data in WAL.
To help write better alerts it would be great if Prometheus exposed a metric that tells us it's fully started, that way any alert that suppose to notify us about any runtime issue can filter out starting instances.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
* promtool: support matchers when querying label values
Signed-off-by: Ben Ye <ben.ye@bytedance.com>
* address review comment
Signed-off-by: Ben Ye <ben.ye@bytedance.com>
During shutdown TSDB is stopped before rule manager is stopped. Since TSDB shutdown can take a long time (minutes or 10s of minutes) it keeps rule manager running while parts of Prometheus are already stopped (most notebly scrape manager). This can cause false positive alerts to fire, mostly those that rely on absent() calls since new sample appends will stop while alert queries are still evaluated.
Stop rules before stopping TSDB and scrape manager to avoid this problem.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
* refactor: move from io/ioutil to io and os packages
* use fs.DirEntry instead of os.FileInfo after os.ReadDir
Signed-off-by: MOREL Matthieu <matthieu.morel@cnp.fr>
* Add a --lint flag to the promtool check rules and check config commands
Checking rules with promtool emits warnings in the case of duplicate rules.
These warnings do not result in a non-zero exit code and are difficult to
spot in CI environments. Additionally, checking for duplicates is closer
to a lint check rather than a syntax check.
This commit adds a --lint flag to commands which include checking rules.
The flag can be used to enable or disable certain linting options
and cause the execution to return a non-zero exit code in case
those options are not met.
Signed-off-by: fpetkovski <filip.petkovsky@gmail.com>
* Exit with status 3 on lint error
Signed-off-by: fpetkovski <filip.petkovsky@gmail.com>
We always track total samples queried and add those to the standard set
of stats queries can report.
We also allow optionally tracking per-step samples queried. This must be
enabled both at the engine and query level to be tracked and rendered.
The engine flag is exposed via a Prometheus feature flag, while the
query flag is set when stats=all.
Co-authored-by: Alan Protasio <approtas@amazon.com>
Co-authored-by: Andrew Bloomgarden <blmgrdn@amazon.com>
Co-authored-by: Harkishen Singh <harkishensingh@hotmail.com>
Signed-off-by: Andrew Bloomgarden <blmgrdn@amazon.com>
* Run gofumpt on all files
Getting golangci-lint errors when building on my laptop, possibly because I have newer version of gofumpt then what it was formatted with.
Run gofumpt -w -extra on all files as it will be needed in the future anyway.
* Update golangci-lint to v1.44.2
v1.44.0 upgraded gofumpt so bumping version in CI will help keep formatting correct for everyone
* Address golangci-lint error
Getting 'error-strings: error strings should not be capitalized or end with punctuation or a newline' from revive here.
Drop new line.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
* Improve error logging for missing config and QL dir
Currently, when Prometheus can't open its config file or the query
logging dir under the data dir, it only logs what it has been given
default or commandline/config. Depending on the environment this can be
less than helpful, since the working directory may be unclear to the
user. I have specifically kept the existing error messages as intact as
possible to a) still log the parameter as given and b) cause as little
disruption for log-parsers/-analyzers as possible.
So in case of the config file or the data dir being non-absolute paths,
I use os.GetWd to find the working dir and assemble an absolute path for
error logging purposes. If GetWd fails, we just log "unknown", as
recovering from an error there would be very complex measure, likely not
worth the code/effort.
Example errors:
```
$ ./prometheus
ts=2022-02-06T16:00:53.034Z caller=main.go:445 level=error msg="Error loading config (--config.file=prometheus.yml)" fullpath=/home/klausman/src/prometheus/prometheus.yml err="open prometheus.yml: no such file or directory"
$ touch prometheus.yml
$ ./prometheus
[...]
ts=2022-02-06T16:01:00.992Z caller=query_logger.go:99 level=error component=activeQueryTracker msg="Error opening query log file" file=data/queries.active fullpath=/home/klausman/src/prometheus/data/queries.active err="open data/queries.active: permission denied"
panic: Unable to create mmap-ed active query log
[...]
$
```
Signed-off-by: Tobias Klausmann <klausman@schwarzvogel.de>
* Replace our own logic with just using filepath.Abs()
Signed-off-by: Tobias Klausmann <klausman@schwarzvogel.de>
* Further simplification
Signed-off-by: Tobias Klausmann <klausman@schwarzvogel.de>
* Review edits
Signed-off-by: Tobias Klausmann <klausman@schwarzvogel.de>
* Review edits
Signed-off-by: Tobias Klausmann <klausman@schwarzvogel.de>
* Review edits
Signed-off-by: Tobias Klausmann <klausman@schwarzvogel.de>
This follows the line of argument that the invariant of not looking
ahead of the query time was merely emerging behavior and not a
documented stable feature. Any query that looks ahead of the query
time was simply invalid before the introduction of the negative offset
and the @ modifier.
Signed-off-by: beorn7 <beorn@grafana.com>
Following the argument that breaking the invariant that PromQL does
not look ahead of the evaluation time implies a breaking change, we
still need to keep the feature flag around, but at least we can
communicate that the feature is considered stable, and that the
feature flags will be ignored from v3 on.
Signed-off-by: beorn7 <beorn@grafana.com>
Since `/api/v1/write` is a mutating endpoint, we should still activate
the remote-write-receiver explicitly. But we should do it in the same
way as the other mutating endpoints, i.e. via a flag
`--web.enable-remote-write-receiver`.
This commit marks the feature flag as deprecated, i.e. it still works
but logs a warning on startup. This enables users to seamlessly
migrate. With the next minor release, we can start ignoring the
feature flag (but still warn a user that is trying to use it).
Signed-off-by: beorn7 <beorn@grafana.com>
This commit adds a `--syntax-only` flag for `promtool check config`.
When passing in this flag, promtool will omit various file existence
checks that would cause the check to fail (e.g. the check would not
fail if `rule_files` files don't exist at their respective paths).
This functionality will allow CI systems to check the syntax of
configs without worrying about referenced files.
Fixes: #5222
Signed-off-by: zzehring <zack.zehring@grafana.com>
The promtool check config command still uses the bearer_token_file
field which is deprecated in favour of authorization.credentials_file.
This commit modifies the command to use the new field insted.
Fixes#9874
Signed-off-by: fpetkovski <filip.petkovsky@gmail.com>
- Pick At... method via return value of Next/Seek.
- Do not clobber returned buckets.
- Add partial FloatHistogram suppert.
Note that the promql package is now _only_ dealing with
FloatHistograms, following the idea that PromQL only knows float
values.
As a byproduct, I have removed the histogramSeries metric. In my
understanding, series can have both float and histogram samples, so
that metric doesn't make sense anymore.
As another byproduct, I have converged the sampleBuf and the
histogramSampleBuf in memSeries into one. The sample type stored in
the sampleBuf has been extended to also contain histograms even before
this commit.
Signed-off-by: beorn7 <beorn@grafana.com>
This is to avoid copying the many fields of a histogram.Histogram all
the time.
This also fixes a bunch of formerly broken tests.
Signed-off-by: beorn7 <beorn@grafana.com>
* share tsdb db locker code with agent
Closes#9616
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* add flag to disable lockfile for agent
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* use agentOnlySetting instead of PreAction
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* tsdb: address review feedback
1. Rename Locker to DirLocker
2. Move DirLocker to tsdb/tsdbutil
3. Name metric using fmt.Sprintf
4. Refine error checking in DirLocker test
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* tsdb: create test utilities to assert expected DirLocker behavior
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* tsdb/tsdbutil: fix lint errors
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* tsdb/agent: fix windows test failure
Use new DB variable instead of overriding the old one.
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* Formatting of error message is missing a space after ':'.
* t.Fatalf should be used instead of t.Errorf+return.
Signed-off-by: Mateusz Gozdek <mgozdekof@gmail.com>
PR #9618 introduced failing to load the config file when agent mode is
configured to run with unspported settings. This made the block that
logs a warning on their configuration no-op, which is now removed.
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
Between the tests. This enables parallelizing those tests, which should
cut the test execution time.
Signed-off-by: Mateusz Gozdek <mgozdekof@gmail.com>
This creates a new `model` directory and moves all data-model related
packages over there:
exemplar labels relabel rulefmt textparse timestamp value
All the others are more or less utilities and have been moved to `util`:
gate logging modetimevfs pool runtime
Signed-off-by: beorn7 <beorn@grafana.com>
* TSDB: demistify seriesRefs and ChunkRefs
The TSDB package contains many types of series and chunk references,
all shrouded in uint types. Often the same uint value may
actually mean one of different types, in non-obvious ways.
This PR aims to clarify the code and help navigating to relevant docs,
usage, etc much quicker.
Concretely:
* Use appropriately named types and document their semantics and
relations.
* Make multiplexing and demuxing of types explicit
(on the boundaries between concrete implementations and generic
interfaces).
* Casting between different types should be free. None of the changes
should have any impact on how the code runs.
TODO: Implement BlockSeriesRef where appropriate (for a future PR)
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* feedback
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* agent: demistify seriesRefs and ChunkRefs
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
Using the same variable for storage.tsdb.path and storage.agent.path
as below in main.go causes cfg.localStoragePath to be data/ or
data-agent/ at random.
a.Flag("storage.tsdb.path", "Base path for metrics storage.").
PreAction(serverOnlySetting()).
Default("data/").StringVar(&cfg.localStoragePath)
a.Flag("storage.agent.path", "Base path for metrics storage.").
PreAction(agentOnlySetting()).
Default("data-agent/").StringVar(&cfg.localStoragePath)
This patch fixes it by using a different variable for storage.agent.path
Signed-off-by: Sunil Thaha sthaha@redhat.com
Signed-off-by: Sunil Thaha <sthaha@redhat.com>
* Fix misleading agent-only/server-only check messages.
Issue:
```
[root@host01 ~]# docker run -it --net=host --rm -v /root/editor/prom-agent-batcopter.yaml:/etc/prometheus/prometheus.yaml -v /root/prom-batcopter-data:/prometheus -u root --name prom-agent-batcopter quay.io/prometheus/prometheus:main --enable-feature=agent --config.file=/etc/prometheus/prometheus.yaml --storage.tsdb.path=/prometheus --web.listen-address=:9091
ts=2021-11-02T16:00:59.789Z caller=main.go:205 level=info msg="Experimental agent mode enabled."
The following flag(s) can not be used in agent mode: ["--enable-feature"]
```
Problem was that PreAction gives us all parsed flag. Context does not give us any info on what flag clause it was defined.
Also added info for flag help about being server or agent only.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* gofumpt.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
So temporary data directory can be successfully removed, as on Windows,
directory cannot be in used while removal.
Signed-off-by: Mateusz Gozdek <mgozdekof@gmail.com>
* Initial draft of prometheus-agent
This commit introduces a new binary, prometheus-agent, based on the
Grafana Agent code. It runs a WAL-only version of prometheus without the
TSDB, alerting, or rule evaluations. It is intended to be used to
remote_write to Prometheus or another remote_write receiver.
By default, prometheus-agent will listen on port 9095 to not collide
with the prometheus default of 9090.
Truncation of the WAL cooperates on a best-effort case with Remote
Write. Every time the WAL is truncated, the minimum timestamp of data to
truncate is determined by the lowest sent timestamp of all samples
across all remote_write endpoints. This gives loose guarantees that data
from the WAL will not try to be removed until the maximum sample
lifetime passes or remote_write starts functionining.
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* add tests for Prometheus agent (#22)
* add tests for Prometheus agent
* add tests for Prometheus agent
* rearranged tests as per the review comments
* update tests for Agent
* changes as per code review comments
Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com>
* incremental changes to prometheus agent
Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com>
* changes as per code review comments
Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com>
* Commit feedback from code review
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* Port over some comments from grafana/agent
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* Rename agent.Storage to agent.DB for tsdb consistency
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* Consolidate agentMode ifs in cmd/prometheus/main.go
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* Document PreAction usage requirements better for agent mode flags
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* remove unnecessary defaultListenAddr
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* `go fmt ./tsdb/agent` and fix lint errors
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
Co-authored-by: SriKrishna Paparaju <paparaju@gmail.com>
Avoid using %#v, nothing needs to parse this, so escaping " and so on
leads to hard to read output.
Add new lines, number and indentation to each alert series output.
Signed-off-by: David Leadbeater <dgl@dgl.cx>
* support maxBlockDuration for promtool tsdb create-blocks-from rules
Fixes#9465
Signed-off-by: Will Tran <will@autonomic.ai>
* don't hardcode 2h as the default block size in rules test
Signed-off-by: Will Tran <will@autonomic.ai>
* Add a feature flag to enable the new manager
This PR creates a copy of the legacy manager and uses it by default.
It is a companion PR to #9349. With this PR, users can enable the new
discovery manager and provide us with any feedback / side effects that
the new behaviour might have.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
A lot of this code was hacked together, literally during a
hackathon. This commit intends not to change the code substantially,
but just make the code obey the usual style practices.
A (possibly incomplete) list of areas:
* Generally address linter warnings.
* The `pgk` directory is deprecated as per dev-summit. No new packages should
be added to it. I moved the new `pkg/histogram` package to `model`
anticipating what's proposed in #9478.
* Make the naming of the Sparse Histogram more consistent. Including
abbreviations, there were just too many names for it: SparseHistogram,
Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in
general. Only add "Sparse" if it is needed to avoid confusion with
conventional Histograms (which is rare because the TSDB really has no notion
of conventional Histograms). Use abbreviations only in local scope, and then
really abbreviate (not just removing three out of seven letters like in
"Histo"). This is in the spirit of
https://github.com/golang/go/wiki/CodeReviewComments#variable-names
* Several other minor name changes.
* A lot of formatting of doc comments. For one, following
https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences
, but also layout question, anticipating how things will look like
when rendered by `godoc` (even where `godoc` doesn't render them
right now because they are for unexported types or not a doc comment
at all but just a normal code comment - consistency is queen!).
* Re-enabled `TestQueryLog` and `TestEndopints` (they pass now,
leaving them disabled was presumably an oversight).
* Bucket iterator for histogram.Histogram is now created with a
method.
* HistogramChunk.iterator now allows iterator recycling. (I think
@dieterbe only commented it out because he was confused by the
question in the comment.)
* HistogramAppender.Append panics now because we decided to treat
staleness marker differently.
Signed-off-by: beorn7 <beorn@grafana.com>
* Allow to tune the scrape tolerance
In most of the classic monitoring use cases, a few milliseconds
difference can be omitted.
In Prometheus, a few millisecond difference can however make a big
difference.
Currently, Prometheus will ignore up to 2 ms difference in the
alignments.
It turns out that for users who can afford a 10ms difference, there is a
lot of resources and disk space to win, as shown in this graph, which
shows the bytes / samples over a production Prometheus server. You can
clearly see the switch from 2ms to 10ms tolerance.
This pull request enables the adjustment of the scrape timestamp
alignment tolerance.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Fix golint
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
The compaction analysis which runs under promtool tsdb analyze can be an
intensive process which slows down the entire command.
This commit adds an --extended flag to tsdb analyze which can be toggled
for running long running tasks, such as compaction analysis.
Signed-off-by: fpetkovski <filip.petkovsky@gmail.com>
Trade space for speed. Convert all rules into our temporary struct, sort
and then iterate. This is a significant when having many rules.
Signed-off-by: Holger Hans Peter Freyther <holger@moiji-mobile.com>
Add a new built-in metric `scrape_timeout_seconds` to allow monitoring
of the ratio of scrape duration to the scrape timeout. Hide behind a
feature flag to avoid additional cardinality by default.
Signed-off-by: SuperQ <superq@gmail.com>
* PromQL: Fix start and end keywords masking label and metric names
This commit fixes an issue with the "at modifier" that introduced two
new keywords: `start` and `end`. In grouping options and in metric
names, these keywords took precedence over metric or label names, so
that those metrics and labels could no longer be referenced.
Signed-off-by: Clayton Peters <clayton.peters@man.com>
* Add in additional tests for metrics and/or labels called start/end.
Signed-off-by: Clayton Peters <clayton.peters@man.com>
* *: Cut 2.29.0-rc.0
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* VERSION: bump to 2.29.0-rc.0
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* Remove experimental wording on size-based retention
Followup of #9004
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Fix PR reference in changelog
Signed-off-by: George Brighton <george@gebn.co.uk>
* Describe EC2 availability zone IDs at most once per refresh (#9142)
Signed-off-by: George Brighton <george@gebn.co.uk>
* Describe EC2 availability zones at most once per SD load
Closes#9142.
Signed-off-by: George Brighton <george@gebn.co.uk>
* Incorporate feedback
Signed-off-by: George Brighton <george@gebn.co.uk>
* Integrate feedback
Signed-off-by: George Brighton <george@gebn.co.uk>
* Add a compatibility note for macOS users.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* *: Cut v2.29.0-rc.1
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* Fix `kuma_sd` targetgroup reporting (#9157)
* Bundle all xDS targets into a single group
Signed-off-by: austin ce <austin.cawley@gmail.com>
* *: cut v2.29.0-rc.2
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* Rename links
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* bump codemirror-promql to 0.17.0
Signed-off-by: Augustin Husson <husson.augustin@gmail.com>
* *: cut v2.29.0
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* tsdb: align atomically accessed int64 (#9192)
This prevents a panic in 32-bit archs:
https://pkg.go.dev/sync/atomic#pkg-note-BUGFixed#9190
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Release 2.29.1 (#9193)
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
Co-authored-by: Clayton Peters <clayton.peters@man.com>
Co-authored-by: Frederic Branczyk <fbranczyk@gmail.com>
Co-authored-by: George Brighton <george@gebn.co.uk>
Co-authored-by: Austin Cawley-Edwards <austin.cawley@gmail.com>
Co-authored-by: Levi Harrison <git@leviharrison.dev>
Co-authored-by: Augustin Husson <husson.augustin@gmail.com>
* Fix `kuma_sd` targetgroup reporting (#9157)
* Bundle all xDS targets into a single group
Signed-off-by: austin ce <austin.cawley@gmail.com>
* Snapshot in-memory chunks on shutdown for faster restarts (#7229)
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Rename links
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Remove Individual Data Type Caps in Per-shard Buffering for Remote Write (#8921)
* Moved everything to nPending buffer
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Simplify exemplar capacity addition
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added pre-allocation
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Don't allocate if not sending exemplars
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Avoid deadlock when processing duplicate series record (#9170)
* Avoid deadlock when processing duplicate series record
`processWALSamples()` needs to be able to send on its output channel
before it can read the input channel, so reads to allow this in case the
output channel is full.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* processWALSamples: update comment
Previous text seems to relate to an earlier implementation.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Optimise WAL loading by removing extra map and caching min-time (#9160)
* BenchmarkLoadWAL: close WAL after use
So that goroutines are stopped and resources released
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* BenchmarkLoadWAL: make series IDs co-prime with #workers
Series are distributed across workers by taking the modulus of the
ID with the number of workers, so multiples of 100 are a poor choice.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* BenchmarkLoadWAL: simulate mmapped chunks
Real Prometheus cuts chunks every 120 samples, then skips those samples
when re-reading the WAL. Simulate this by creating a single mapped chunk
for each series, since the max time is all the reader looks at.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Fix comment
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Remove series map from processWALSamples()
The locks that is commented to reduce contention in are now sharded
32,000 ways, so won't be contended. Removing the map saves memory and
goes just as fast.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* loadWAL: Cache the last mmapped chunk time
So we can skip calling append() for samples it will reject.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Improvements from code review
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Full stops and capitals on comments
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Cache max time in both places mmappedChunks is updated
Including refactor to extract function `setMMappedChunks`, to reduce
code duplication.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Update head min/max time when mmapped chunks added
This ensures we have the correct values if no WAL samples are added for
that series.
Note that `mSeries.maxTime()` was always `math.MinInt64` before, since
that function doesn't consider mmapped chunks.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Split Go and React Tests (#8897)
* Added go-ci and react-ci
Co-authored-by: Julien Pivotto <roidelapluie@inuits.eu>
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Remove search keymap from new expression editor (#9184)
Signed-off-by: Julius Volz <julius.volz@gmail.com>
Co-authored-by: Austin Cawley-Edwards <austin.cawley@gmail.com>
Co-authored-by: Levi Harrison <git@leviharrison.dev>
Co-authored-by: Julien Pivotto <roidelapluie@inuits.eu>
Co-authored-by: Bryan Boreham <bjboreham@gmail.com>
Co-authored-by: Julius Volz <julius.volz@gmail.com>
