Also improves TestPopulateLabels: testutil.ErrorEqual just returned a
bool without failing the test.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Track remote write queues via a map so we don't care about index.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Support a job name for remote write/read so we can differentiate between
them using the name.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Remote write/read has Name to not confuse the meaning of the field with
scrape job names.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Split queue/client label into remote_name and url labels.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Don't allow for duplicate remote write/read configs.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Ensure we restart remote write queues if the hash of their config has
not changed, but the remote name has changed.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Include name in remote read/write config hashes, simplify duplicates
check, update test accordingly.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
It is possible that desired shards is always a bit higher than the
number of shards (less than 30%) and by exporting desired shards as the
raw number it will be easy to tell if a Prometheus is in that situation.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
* Refactor calculateDesiredShards + don't reshard if we're having issues
sending samples.
* Track lastSendTimestamp via an int64 with atomic add/load, add a test
for reshard calculation.
* Simplify conditional for skipping resharding, add samplesIn/Out to shard
testcase struct.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
The WAL Watcher replays a checkpoint after it is created in order to
garbage collect series that no longer exist in the WAL. Currently the
garbage collection process is done serially with reading from the tip of
the WAL which can cause large delays in writing samples to remote
storage just after compaction occurs.
This also fixes a memory leak where dropped series are not cleaned up as
part of the SeriesReset process.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
* Replaced test validations with testutils on storage/remote/codec_test.go
Signed-off-by: George Felix <george.felix@ubeeqo.com>
* gofmt
Signed-off-by: George Felix <george.felix@ubeeqo.com>
* Removed shouldPass assertion
Signed-off-by: George Felix <gfelixc@gmail.com>
* Fixes to improve readability
Signed-off-by: George Felix <george.felix@ubeeqo.com>
* Fixes based on code review comments
Signed-off-by: George Felix <george.felix@ubeeqo.com>
* Added Fatal method and used it in buffer_test
Signed-off-by: Joe Elliott <number101010@gmail.com>
* Added period to meet contributing guidelines
Signed-off-by: Joe Elliott <number101010@gmail.com>
* Removed fatal testutil method. Refactored test cases to use testutil.Assert
Signed-off-by: Joe Elliott <number101010@gmail.com>
* Added if found condition for clarity
Signed-off-by: Joe Elliott <number101010@gmail.com>
* Show warnings in UI if query have returned some warnings
+ improve warning (error) text if query to remote was finished with error
* Add prefixes for remote_read errors
Signed-off-by: Stan Putrya <root.vagner@gmail.com>
* Update go.mod dependencies before release
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Add issue for showing query warnings in promtool
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Revert json-iterator back to 1.1.6
It produced errors when marshaling Point values with special float
values.
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Fix expected step values in promtool tests after client_golang update
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Update generated protobuf code after proto dep updates
Signed-off-by: Julius Volz <julius.volz@gmail.com>
The desired shards calculation now properly keeps track of the rate of
pending samples, and uses the previously unused integralAccumulator to
adjust for missing information in the desired shards calculation.
Also, configure more capacity for each shard. The default 10 capacity
causes shards to block on each other while
sending remote requests. Default to a 500 sample capacity and explain in
the documentation that having more capacity will help throughput.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
* Check for duplicate label names in remote read
Also add test to confirm that #5731 is fixed
* Use subtests in TestValidateLabelsAndMetricName
* Really check that expectedErr matches err
Signed-off-by: Vadym Martsynovskyy <vmartsynovskyy@gmail.com>
* Only check last directory when discovering checkpoint number
Signed-off-by: Devin Trejo <dtrejo@palantir.com>
* Comments for checkpointNum
Signed-off-by: Devin Trejo <dtrejo@palantir.com>
* Add benchmark for sample delivery
* Simplify StoreSeries to have only one loop
* Reduce allocations for pending samples in runShard
* Only allocate one send slice per segment
* Cache a buffer in each shard for snappy to use
* Remove queue manager seriesMtx
It is not possible for any of the places protected by the seriesMtx to
be called concurrently so it is safe to remove. By removing the mutex we
can simplify the Append code to one loop.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
This allows other processes to reuse just the remote write code without
having to use the remote read code as well. This will be used to create
a sidecar capable of sending remote write payloads.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
* Update remote write and remote read separately
* Add external labels to the remote write conf hash
* Add unit tests for remote storage lifecycle
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
* Don't panic if we try to release a string that is not in the interner.
* Move seriesMtx locking in QueueManager's StoreSeries function.
This stops us from calling release for strings that aren't interned if
there's a race between reading a checkpoint and storing new series
labels, which could happen during checkpointing or reloading config.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Unregister remote write queue manager specific metrics when stopping the
queue manager.
* Use DeleteLabelValues instead of Unregister to remove queue and watcher
related metrics when we stop them. Create those metrics in the structs
start functions rather than in their constructors because of the
ordering of creation, start, and stop in remote storage ApplyConfig.
* Add setMetrics function to WAL watcher so we can set
the watchers metrics in it's Start function, but not
have to call Start in some tests (causes data race).
Signed-off-by: Callum Styan <callumstyan@gmail.com>
From the documentation:
> The default HTTP client's Transport may not
> reuse HTTP/1.x "keep-alive" TCP connections if the Body is
> not read to completion and closed.
This effectively enable keep-alive for the fixed requests.
Signed-off-by: Romain Baugue <romain.baugue@elwinar.com>
* Fix ReadCheckpoint to ensure that it actually reads all the contents of
each segment in a checkpoint dir, or returns an error.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
i) Uses the more idiomatic Wrap and Wrapf methods for creating nested errors.
ii) Fixes some incorrect usages of fmt.Errorf where the error messages don't have any formatting directives.
iii) Does away with the use of fmt package for errors in favour of pkg/errors
Signed-off-by: tariqibrahim <tariq181290@gmail.com>
a string when there are no longer any refs. Add tests for interning.
Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com>
Signed-off-by: Callum Styan <callumstyan@gmail.com>
- Unmarshall external_labels config as labels.Labels, add tests.
- Convert some more uses of model.LabelSet to labels.Labels.
- Remove old relabel pkg (fixes#3647).
- Validate external label names.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
* Consistently pre-lookup the metrics for a given queue in queue manager.
* Don't open the WAL (for writing) in the remote_write code.
* Add some more logging.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
- Remove prometheus_remote_queue_last_send_timestamp_seconds metric. Its not particularly useful, we have highest_timestamp_seconds.
- Factor out maxGauage, a gauge that only increases.
- Change sharding calculations to use max samples in timestamp - max samples out timestamp (not rates).
- Also include the ratio of samples dropped to correctly predict number of pending samples.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
- Add a dropped samples EWMA and use it in calculating desired shards.
- Update metric names and a log messages.
- Limit number of entries in the dedupe logging middleware to prevent potential OOM.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
- If we're replaying the WAL to get series records, skip that segment when we hit corruptions.
- If we're tailing the WAL for samples, fail the watcher.
- When the watcher fails, restart from the latest checkpoint - and only send new samples by updating startTime.
- Tidy up log lines and error handling, don't return so many errors on quiting.
- Expect EOF when processing checkpoints.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
- Tests that created a QueueManager were leaving behind files at the end of tests.
- WAL replaying (readToEnd)tests seem to require extra time to finish now.
- Some fixes to make staticcheck happy
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* storage/remote: adapt tests for Travis CI
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Check filesystems on Travis environment
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Run remote/storage tests on CircleCI for troubleshooting
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Try using tmpfs partition
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Revert "Try using tmpfs partition"
This reverts commit 85a30deb72.
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Don't store labels in writeToMock
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Fix data race
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Bump retries to 100 meaning that the total timeout is 10s
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* clean up .travis.yml
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* code fixup
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Remove unneeded empty line
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
- Use the queue name in WAL watcher logging.
- Don't return from watch if the reader error was EOF.
- Fix sample timestamp check logic regarding what samples we send.
- Refactor so we don't need readToEnd/readSeriesRecords
- Fix wal_watcher tests since readToEnd no longer exists
Signed-off-by: Callum Styan <callumstyan@gmail.com>
- Remove datarace in the exported highest scrape timestamp.
- Backoff on enqueue should be per-sample - reset the result for each sample.
- Remove diffKeys, unused ctx and cancelfunc in WALWatcher, 'name' from writeTo interface, and pass it to constructor.
- Reorder functions in WALWatcher depth-first according to call graph.
- Fix vendor/modules.txt.
- Split out the various timer periods into consts at the top of the file.
- Move w.currentSegmentMetric.Set close to where we set the currentSegment.
- Combine r.Next() and isClosed(w.quit) into a single loop.
- Unnest some ifs in WALWatcher.watch, propagate erros in decodeRecord, add some new lines to make it easier to read.
- Reorganise checkpoint handling to reduce nesting and make it easier to follow.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down.
We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes.
Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases.
As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s).
This changes also includes the following optimisations:
- only marshal the proto request once, not once per retry
- maintain a single copy of the labels for given series to reduce GC pressure
Other minor tweaks:
- only reshard if we've also successfully sent recently
- add pending samples, latest sent timestamp, WAL events processed metrics
Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype)
Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes)
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Add flag for size based retention
Signed-off-by: Goutham Veeramachaneni <gouthamve@gmail.com>
* Deprecate the old retention flag for a new one.
Signed-off-by: Goutham Veeramachaneni <gouthamve@gmail.com>
* Add ability to take a suffix for size flag
Signed-off-by: Goutham Veeramachaneni <gouthamve@gmail.com>
* Address feedback
Signed-off-by: Goutham Veeramachaneni <gouthamve@gmail.com>
* update tsdb to v0.4.0
Signed-off-by: Krasi Georgiev <kgeorgie@redhat.com>
* remove unused struct field
Signed-off-by: Krasi Georgiev <kgeorgie@redhat.com>
* *: use latest release of staticcheck
It also fixes a couple of things in the code flagged by the additional
checks.
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Use official release of staticcheck
Also run 'go list' before staticcheck to avoid failures when downloading packages.
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
Add WALSegmentSize as an option, and the corresponding flag "storage.tsdb.wal-segment-size" to tune the max size of wal segment files.
The addressed base problem is to reduce the disk space used by wal segment files : on a raspberry pi, for instance, we often want to reduce write load of the sd card, then, the wal directory is mounted on a memory (space limited) partition.
the default value of the segment max file size, pushed the size of directory to 128 MB for each segment , which is too much ram consumption on a rasp.
the initial discussion is at https://github.com/prometheus/tsdb/pull/450
Currently Prometheus requests show up with a UA of Go-http-client/1.1
which isn't super helpful. Though the X-Prometheus-Remote-* headers
exist they need to be explicitly configured when logging the request in
order to be able to deduce this is a request originating from
Prometheus. By setting the header we remove this ambiguity and make
default server logs just a bit more useful.
This also updates a few other places to consistently capitalize the 'P'
in the user agent, as well as ensure we set a UA to begin with.
Signed-off-by: Daniele Sluijters <daenney@users.noreply.github.com>
* *: remove use of golang.org/x/net/context
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* scrape: fix TestTargetScrapeScrapeCancel
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Limit the number of samples remote read can return.
- Return 413 entity too large.
- Limit can be set be a flag. Allow 0 to mean no limit.
- Include limit in error message.
- Set default limit to 50M (* 16 bytes = 800MB).
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
There are many more (mostly finalizers like Close/Stop/etc.), but most of
the others seemed like one couldn't do much about them anyway.
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Allow for BufferedSeriesIterator instances to be created without an underlying iterator, to simplify their usage.
Signed-off-by: Alin Sinpalean <alin.sinpalean@gmail.com>
* Add Start/End to SelectParams
* Make remote read use the new selectParams for start/end
This commit will continue sending the start/end time of the remote read
query as the overarching promql time and the specific range of data that
the query is intersted in receiving a response to is now part of the
ReadHints (upstream discussion in #4226).
* Remove unused vendored code
The genproto.sh script was updated, but the code wasn't regenerated.
This simply removes the vendored deps that are no longer part of the
codegen output.
Signed-off-by: Thomas Jackson <jacksontj.89@gmail.com>
Fixes#4254
NaNs don't equal themselves, so a duplicate NaN would
always hit the break statement and never get popped.
We should not be returning multiple data point for the same
timestamp, so don't compare values at all.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
This commit fixes a denial-of-service issue of the remote
read endpoint. It limits the size of the POST request body
to 32 MB such that clients cannot write arbitrary amounts
of data to the server memory.
Fixes#4238
Signed-off-by: Andreas Auernhammer <aead@mail.de>
* Move range logic to 'eval'
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make aggregegate range aware
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* PromQL is statically typed, so don't eval to find the type.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Extend rangewrapper to multiple exprs
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Start making function evaluation ranged
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make instant queries a special case of range queries
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Eliminate evalString
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Evaluate range vector functions one series at a time
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make unary operators range aware
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make binops range aware
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Pass time to range-aware functions.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make simple _over_time functions range aware
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Reduce allocs when working with matrix selectors
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Add basic benchmark for range evaluation
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Reuse objects for function arguments
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Do dropmetricname and allocating output vector only once.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Add range-aware support for range vector functions with params
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Optimise holt_winters, cut cpu and allocs by ~25%
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make rate&friends range aware
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make more functions range aware. Document calling convention.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make date functions range aware
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make simple math functions range aware
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Convert more functions to be range aware
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make more functions range aware
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Specialcase timestamp() with vector selector arg for range awareness
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Remove transition code for functions
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Remove the rest of the engine transition code
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Remove more obselete code
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Remove the last uses of the eval* functions
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Remove engine finalizers to prevent corruption
The finalizers set by matrixSelector were being called
just before the value they were retruning to the pool
was then being provided to the caller. Thus a concurrent query
could corrupt the data that the user has just been returned.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Add new benchmark suite for range functinos
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Migrate existing benchmarks to new system
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Expand promql benchmarks
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Simply test by removing unused range code
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* When testing instant queries, check range queries too.
To protect against subsequent steps in a range query being
affected by the previous steps, add a test that evaluates
an instant query that we know works again as a range query
with the tiimestamp we care about not being the first step.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Reuse ring for matrix iters. Put query results back in pool.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Reuse buffer when iterating over matrix selectors
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Unary minus should remove metric name
Cut down benchmarks for faster runs.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Reduce repetition in benchmark test cases
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Work series by series when doing normal vectorSelectors
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Optimise benchmark setup, cuts time by 60%
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Have rangeWrapper use an evalNodeHelper to cache across steps
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Use evalNodeHelper with functions
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Cache dropMetricName within a node evaluation.
This saves both the calculations and allocs done by dropMetricName
across steps.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Reuse input vectors in rangewrapper
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Reuse the point slices in the matrixes input/output by rangeWrapper
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make benchmark setup faster using AddFast
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Simplify benchmark code.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Add caching in VectorBinop
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Use xor to have one-level resultMetric hash key
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Add more benchmarks
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Call Query.Close in apiv1
This allows point slices allocated for the response data
to be reused by later queries, saving allocations.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Optimise histogram_quantile
It's now 5-10% faster with 97% less garbage generated for 1k steps
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make the input collection in rangeVector linear rather than quadratic
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Optimise label_replace, for 1k steps 15x fewer allocs and 3x faster
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Optimise label_join, 1.8x faster and 11x less memory for 1k steps
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Expand benchmarks, cleanup comments, simplify numSteps logic.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Address Fabian's comments
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Comments from Alin.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Address jrv's comments
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Remove dead code
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Address Simon's comments.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Rename populateIterators, pre-init some sizes
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Handle case where function has non-matrix args first
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Split rangeWrapper out to rangeEval function, improve comments
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Cleanup and make things more consistent
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make EvalNodeHelper public
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Fabian's comments.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
More than one remote_write destination can be configured, in which
case it's essential to know which one each log message refers to.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
This adds a parameter to the storage selection interface which allows
query engine(s) to pass information about the operations surrounding a
data selection.
This can for example be used by remote storage backends to infer the
correct downsampling aggregates that need to be provided.
