As far as I understand it, we'd never expect to receive a nil span,
and remote.spansProtoToSpans would panic if we received a nil span.
Marking the fields as non-nullable also means the generated Golang
code doesn't use pointers for these fields, reducing allocations.
Signed-off-by: Charles Korn <charles.korn@grafana.com>
This is a bit more conservative than we could be. As long as a chunk
isn't the first in a block, we can be pretty sure that the previous
chunk won't disappear. However, the incremental gain of returning
NotCounterReset in these cases is probably very small and might not be
worth the code complications.
Wwith this, we now also pay attention to an explicitly set counter
reset during ingestion. While the case doesn't show up in practice
yet, there could be scenarios where the metric source knows there was
a counter reset even if it might not be visible from the values in the
histogram. It is also useful for testing.
Signed-off-by: beorn7 <beorn@grafana.com>
This is an optimization on the existing append in OOOChunk.
What we've been doing so far is find the place inside the out-of-order
slice where the new sample should go in and then place it there and move
any samples to the right if necessary. This is OK but requires a binary
search every time the slice is bigger than 0.
The optimization is opinionated and suggests that although out-of-order
samples can be out-of-order amongst themselves they'll probably be in
order thus we can probably optimistically append at the end and if not
do the binary search.
OOOChunks are capped to 30 samples by default so this is a small
optimization but everything adds up, specially if you handle many active
timeseries with out-of-order samples.
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
Signed-off-by: Jesus Vazquez <jesusvazquez@users.noreply.github.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
* adapt code.go and write_handler.go to support float histograms
* adapt watcher.go to support float histograms
* wip adapt queue_manager.go to support float histograms
* address comments for metrics in queue_manager.go
* set test cases for queue manager
* use same counts for histograms and float histograms
* refactor createHistograms tests
* fix float histograms ref in watcher_test.go
* address PR comments
Signed-off-by: Marc Tuduri <marctc@protonmail.com>
In most cases, there is no sample at `maxt`, so `PeekBack` has to be
used. So far, `PeekBack` did not return a float histogram, and we
disregarded even any returned normal histogram. This fixes both, and
also tweaks the unit test to discover the problem (by using an earlier
timestamp than "now" for the samples in the TSDB).
Signed-off-by: beorn7 <beorn@grafana.com>
Extends Appender.AppendHistogram function to accept the FloatHistogram. TSDB supports appending, querying, WAL replay, for this new type of histogram.
Signed-off-by: Marc Tudurí <marctc@protonmail.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
`QueueManager.externalLabels` becomes a slice rather than a `Labels` so
we can index into it when doing the merge operation.
Note we avoid calling `Labels.Len()` in `labelProtosToLabels()`.
It isn't necessary - `append()` will enlarge the buffer and we're
expecting to re-use it many times.
Also, we now validate protobuf input before converting to Labels.
This way we can detect errors first, and we don't place unnecessary
requirements on the Labels structure.
Re-do seriesFilter using labels.Builder (albeit N^2).
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
This is required to preserve the interface property of SeriesSet that says
"At returns full series. Returned series should be iterable even after Next is called."
Signed-off-by: sniper91 <kevinzhao91@outlook.com>
Re-use previous memory if it is already of the correct type.
In `NewListSeries` we hoist the conversion to an interface value out
so it only allocates once.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Patterned after `Chunk.Iterator()`: pass the old iterator in so it
can be re-used to avoid allocating a new object.
(This commit does not do any re-use; it is just changing all the method
signatures so re-use is possible in later commits.)
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
The SeriesSets to be merged must be created each time round the loop,
otherwise the benchmark is not doing any real work.
Don't call ExpandSeries, because it spends most of its time allocating
a memory buffer to hold the result, which we don't look at.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Fix up merge test again
errors.Unwrap() actually dangerously returns nil if the error does not have an
Unwrap() method, which is the case in at least one of these places where I
noticed that no error was being logged at all when it should have.
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* remote/read_handler: pool input to Marshal()
Use a sync.Pool to reuse byte slices between calls to Marshal() in the
remote read handler.
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@vinted.com>
* remote: add microbenchmark for remote read handler
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@vinted.com>
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@vinted.com>
The wlog.WL type can now be used to create a Write Ahead Log or a Write
Behind Log.
Before the prefix for wbl metrics was
'prometheus_tsdb_out_of_order_wal_' and has been replaced with
'prometheus_tsdb_out_of_order_wbl_'.
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
Signed-off-by: Jesus Vazquez <jesusvazquez@users.noreply.github.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
Where the code was multiplying bytes by number of operations, this
resulted in absurdly high throughput numbers.
Also, in `BenchmarkParse()`, don't run the `expfmt` case twice.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Use new experimental package `golang.org/x/exp/slices`.
slices.Sort works on values that are directly comparable, like ints,
so avoids the overhad of an interface call to `.Less()`.
Left tests unchanged, because they don't need the speed and it may be
a cross-check that slices.Sort gives the same answer.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Introduce out-of-order TSDB support
This implementation is based on this design doc:
https://docs.google.com/document/d/1Kppm7qL9C-BJB1j6yb6-9ObG3AbdZnFUBYPNNWwDBYM/edit?usp=sharing
This commit adds support to accept out-of-order ("OOO") sample into the TSDB
up to a configurable time allowance. If OOO is enabled, overlapping querying
are automatically enabled.
Most of the additions have been borrowed from
https://github.com/grafana/mimir-prometheus/
Here is the list ist of the original commits cherry picked
from mimir-prometheus into this branch:
- 4b2198d7ec
- 2836e5513f
- 00b379c3a5
- ff0dc75758
- a632c73352
- c6f3d4ab33
- 5e8406a1d4
- abde1e0ba1
- e70e769889
- df59320886
Co-authored-by: Jesus Vazquez <jesus.vazquez@grafana.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Dieter Plaetinck <dieter@grafana.com>
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* gofumpt files
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Add license header to missing files
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix OOO tests due to existing chunk disk mapper implementation
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix truncate int overflow
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Add Sync method to the WAL and update tests
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* remove useless sync
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Update minOOOTime after truncating Head
* Update minOOOTime after truncating Head
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix lint
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Add a unit test
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Load OutOfOrderTimeWindow only once per appender
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix OOO Head LabelValues and PostingsForMatchers
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix replay of OOO mmap chunks
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Remove unnecessary err check
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Prevent panic with ApplyConfig
Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Run OOO compaction after restart if there is OOO data from WBL
Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Apply Bartek's suggestions
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Refactor OOO compaction
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Address comments and TODOs
- Added a comment explaining why we need the allow overlapping
compaction toggle
- Clarified TSDBConfig OutOfOrderTimeWindow doc
- Added an owner to all the TODOs in the code
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Run go format
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix remaining review comments
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix tests
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Change wbl reference when truncating ooo in TestHeadMinOOOTimeUpdate
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix TestWBLAndMmapReplay test failure on windows
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Address most of the feedback
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Refactor the block meta for out of order
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix windows error
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix review comments
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Dieter Plaetinck <dieter@grafana.com>
Co-authored-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Add runtime config to control native histogram ingestion
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Make the config into a CLI flag
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
And a few cases of `EmptyLabels()`.
Replacing code which assumes the internal structure of `Labels`.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Add histogram validation
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Correct negative offset validation
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Address review comments
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Validation benchmark
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Add more checks
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Attempt to fix tests
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Fix stuff
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Append metadata to the WAL
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Remove extra whitespace; Reword some docstrings and comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use RLock() for hasNewMetadata check
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use single byte for metric type in RefMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Update proposed WAL format for single-byte type metadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Implementa MetadataAppender interface for the Agent
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Address first round of review comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Amend description of metadata in wal.md
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Correct key used to retrieve metadata from cache
When we're setting metadata entries in the scrapeCace, we're using the
p.Help(), p.Unit(), p.Type() helpers, which retrieve the series name and
use it as the cache key. When checking for cache entries though, we used
p.Series() as the key, which included the metric name _with_ its labels.
That meant that we were never actually hitting the cache. We're fixing
this by utiling the __name__ internal label for correctly getting the
cache entries after they've been set by setHelp(), setType() or
setUnit().
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Put feature behind a feature flag
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix AppendMetadata docstring
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Reorder WAL format document
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Change error message of AppendMetadata; Fix access of s.meta in AppendMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Reuse temporary buffer in Metadata encoder
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Only keep latest metadata for each refID during checkpointing
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix test that's referencing decoding metadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Avoid creating metadata block if no new metadata are present
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add tests for corrupt metadata block and relevant record type
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix CR comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Extract logic about changing metadata in an anonymous function
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Implement new proposed WAL format and amend relevant tests
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use 'const' for metadata field names
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Apply metadata to head memSeries in Commit, not in AppendMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add docstring and rename extracted helper in scrape.go
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add tests for tsdb-related cases
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix linter issues vol1
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix linter issues vol2
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix Windows test by closing WAL reader files
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use switch instead of two if statements in metadata decoding
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix review comments around TestMetadata* tests
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add code for replaying WAL; test correctness of in-memory data after a replay
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Remove scrape-loop related code from PR
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Address first round of comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Simplify tests by sorting slices before comparison
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix test to use separate transactions
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Empty out buffer and record slices after encoding latest metadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix linting issue
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Update calculation for DroppedMetadata metric
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Rename MetadataAppender interface and AppendMetadata method to MetadataUpdater/UpdateMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Reuse buffer when encoding latest metadata for each series
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix review comments; Check all returned error values using two helpers
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Simplify use of helpers
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Satisfy linter
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
Note: This is deliberately an incompatible change. Since we have never
used histograms in remote read/write yet, there is no point in keeping
compatibility. This _is_, however, compatible to the state in the main
branch.
This commit flattens the bucket message into top-level fields. This
has the disadvantage of now having two triples of fields prefixed with
`negative_...` or `positive_...`. However, with this structure, we
save one tag on the wire. And, perhaps more importantly, we mirror the
structure of the `histogram.Histogram` Go type.
This commit also adjusts `repeated` fields to use names in the plural
form, as it is also the case for the fields that already existed.
This also adds a doc comment to `HistogramProtoToHistogram` and
changes its return type to a pointer (which is more convenient and
probably more efficient).
Signed-off-by: beorn7 <beorn@grafana.com>
* Removing global state modification on unit tests (fix#10033#10034)
The config.DefaultRemoteReadConfig and config.DefaultRemoteWriteConfig
instances hold global state. Unit tests were changing their url.URL reference
globally causing false positives when tests were ran through package.
Two helper functions were created to copy those global values instead of changing
them in place to fix null point when running unit tests by method instead of
by package.
Signed-off-by: Leonardo Zamariola <leonardo.zamariola@gmail.com>
* Fixing pull request suggestions
Copying by value from default config
Signed-off-by: Leonardo Zamariola <leonardo.zamariola@gmail.com>
* Rename walDir parameter to dir
Signed-off-by: Matej Gera <matejgera@gmail.com>
* Improve NewQueueManager comment
Signed-off-by: Matej Gera <matejgera@gmail.com>
"Labels is a sorted set of labels. Order has to be guaranteed upon
instantiation." says the comment, so fix all the tests that break this
rule.
For `BenchmarkLabelValuesWithMatchers()` and
`BenchmarkHeadLabelValuesWithMatchers()` the amount of work done changes
significantly if you put the labels in order, because all series refs
get neatly partitioned by the `tens` label, so I renamed the labels
to maintain the previous behaviour.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* refactor: move from io/ioutil to io and os packages
* use fs.DirEntry instead of os.FileInfo after os.ReadDir
Signed-off-by: MOREL Matthieu <matthieu.morel@cnp.fr>
If FlushAndShutdown is called with a full batchQueue, and then Batch is
called rather than the normal path of reading from a queue a deadlock
might be encountered. Rather than having FlushAndShutdown having
blocking code while holding a lock retry sending the batch every second.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
Do not block when trying to write a batch to the queue. This can cause
appends to lock forever if the only thing reading from the queue needs
the mutex to write. Instead, if batchQueue is full pop the sample that
was just added from the partial batch and return false. The code doing
the appending already handles retries with backoff.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
* Run gofumpt on all files
Getting golangci-lint errors when building on my laptop, possibly because I have newer version of gofumpt then what it was formatted with.
Run gofumpt -w -extra on all files as it will be needed in the future anyway.
* Update golangci-lint to v1.44.2
v1.44.0 upgraded gofumpt so bumping version in CI will help keep formatting correct for everyone
* Address golangci-lint error
Getting 'error-strings: error strings should not be capitalized or end with punctuation or a newline' from revive here.
Drop new line.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
If a queue is stopped and one of its shards happens to hit the
batch_send_deadline at the same time a deadlock can occur where stop
holds the mutex and will not release it until the send is finished, but
the send needs the mutex to retrieve the most recent batch. This is
fixed by using a second mutex just for writing.
In addition, the test I wrote exposed a case where during shutdown a
batch could be sent twice due to concurrent calls to queue.Batch() and
queue.FlushAndShutdown(). Protect these with a mutex as well.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
Previously we would reject an increase from 2 to 2.5 as being
within 30%; by rounding up first we see this as an increase from 2 to 3.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Change the coefficient from 1% to 5%, so instead of targetting to clear
the backlog in 100s we target 20s.
Update unit test to reflect the new behaviour.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
We have an alert that fires when prometheus_remote_storage_highest_timestamp_in_seconds - prometheus_remote_storage_queue_highest_sent_timestamp_seconds
becomes too high. But we have an agent that fires this when the remote "rate-limits" the user.
This is because prometheus_remote_storage_queue_highest_sent_timestamp_seconds doesn't get updated
when the remote sends a 429.
I think we should update the metrics, and the change I made makes sense. Because if the requests fails
because of connectivity issues, etc. we will never exit the `sendWriteRequestWithBackoff` function. It only
exits the function when there is a non-recoverable error, like a bad status code, and in that case, I think
the metric needs to be updated.
Signed-off-by: Goutham Veeramachaneni <gouthamve@gmail.com>
* storage: expose bug in iterators #10027
Signed-off-by: beorn7 <beorn@grafana.com>
* storage: fix bug #10027 in iterators' Seek method
Signed-off-by: beorn7 <beorn@grafana.com>
* Append reporting metrics without limit
If reporting metrics fails due to reaching the limit, this makes the
target appear as UP in the UI, but the metrics are missing.
This commit bypasses that limit for report metrics.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Remove check against cfg so interval/ timeout are always set (#10023) (#10031)
Signed-off-by: Nicholas Blott <blottn@tcd.ie>
Co-authored-by: Nicholas Blott <blottn@tcd.ie>
* Cut v2.32.1
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Apply suggestions from code review
Signed-off-by: Julius Volz <julius.volz@gmail.com>
Co-authored-by: Levi Harrison <git@leviharrison.dev>
Co-authored-by: Julien Pivotto <roidelapluie@inuits.eu>
Co-authored-by: Nicholas Blott <blottn@tcd.ie>
Co-authored-by: Julius Volz <julius.volz@gmail.com>
Co-authored-by: Levi Harrison <git@leviharrison.dev>
Previously BenchmarkSampleDelivery spent a lot of effort checking each
sample had arrived, so was largely showing the performance of test-only
code.
Increase the number of shards to be more realistic for a large
workload.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Right now the values for enqueuedSamples and enqueuedExemplars is never
subtracted leading to inflated values for failedSamples/failedExemplars
when a hard shutdown of a shard occurs.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
Channels can cause bottlenecks and tons of context switches when reading
hundreds of thousands of samples per second from a single queue.
Instead, pre-batch the samples to amortize the cost of the concurrency
overhead.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
`BufferedSeriesIterator` and `MemoizedSeriesIterator` use a method
called `Values` for exactly the purpose for which all other iterators
of the same kind use a method called `At`. That alone is confusing,
but on top of that, the `Values` method only returns a single sample,
not multiple values. I assume the naming has historical reasons. This
commit makes it more consistent. It is now easier to read, and now
`BufferedSeriesIterator` and `MemoizedSeriesIterator` implement
`chunkenc.Iterator` like many other iterators, too.
Signed-off-by: beorn7 <beorn@grafana.com>
There was a subtle and nasty bug in listSeriesIterator.Seek.
In addition, the Seek call is defined to be a no-op if the current
position of the iterator is already pointing to a suitable
sample. This commit adds fast paths for this case to several
potentially expensive Seek calls.
Another bug was in concreteSeriesIterator.Seek. It always searched the
whole series and not from the current position of the iterator.
Signed-off-by: beorn7 <beorn@grafana.com>
- Pick At... method via return value of Next/Seek.
- Do not clobber returned buckets.
- Add partial FloatHistogram suppert.
Note that the promql package is now _only_ dealing with
FloatHistograms, following the idea that PromQL only knows float
values.
As a byproduct, I have removed the histogramSeries metric. In my
understanding, series can have both float and histogram samples, so
that metric doesn't make sense anymore.
As another byproduct, I have converged the sampleBuf and the
histogramSampleBuf in memSeries into one. The sample type stored in
the sampleBuf has been extended to also contain histograms even before
this commit.
Signed-off-by: beorn7 <beorn@grafana.com>
* Support appending different sample types to the same series
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix comments
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix build
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Add basic initial developer docs for TSDB
There's a decent amount of content already out there (blog posts,
conference talks, etc), but:
* when they get stale, they don't tend to get updated
* they still leave me with questions that I'ld like to answer
for developers (like me) who want to use, or work with, TSDB
What I propose is developer docs inside the prometheus
repository. Easy to find and harness the power of the community
to expand it and keep it up to date.
* perfect is the enemy of good. Let's have a base and incrementally improve
* Markdown docs should be broad but not too deep. Source code comments
can complement them, and are the ideal place for implementation details.
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* use example code that works out of the box
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* Apply suggestions from code review
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* PR feedback
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* more docs
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* PR feedback
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* Apply suggestions from code review
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Apply suggestions from code review
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* feedback
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* Update tsdb/docs/usage.md
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* final tweaks
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* workaround docs versioning issue
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* Move example code to real executable, testable example.
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* cleanup example test and make sure it always reproduces
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* obtain temp dir in a way that works with older Go versions
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* Fix Ganesh's comments
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
This is to avoid copying the many fields of a histogram.Histogram all
the time.
This also fixes a bunch of formerly broken tests.
Signed-off-by: beorn7 <beorn@grafana.com>
This creates a new `model` directory and moves all data-model related
packages over there:
exemplar labels relabel rulefmt textparse timestamp value
All the others are more or less utilities and have been moved to `util`:
gate logging modetimevfs pool runtime
Signed-off-by: beorn7 <beorn@grafana.com>
* TSDB: demistify seriesRefs and ChunkRefs
The TSDB package contains many types of series and chunk references,
all shrouded in uint types. Often the same uint value may
actually mean one of different types, in non-obvious ways.
This PR aims to clarify the code and help navigating to relevant docs,
usage, etc much quicker.
Concretely:
* Use appropriately named types and document their semantics and
relations.
* Make multiplexing and demuxing of types explicit
(on the boundaries between concrete implementations and generic
interfaces).
* Casting between different types should be free. None of the changes
should have any impact on how the code runs.
TODO: Implement BlockSeriesRef where appropriate (for a future PR)
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* feedback
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* agent: demistify seriesRefs and ChunkRefs
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* Allow to disable trimming when querying TSDB
Signed-off-by: Marco Pracucci <marco@pracucci.com>
* Addressed review comments
Signed-off-by: Marco Pracucci <marco@pracucci.com>
* Added unit test
Signed-off-by: Marco Pracucci <marco@pracucci.com>
* Renamed TrimDisabled to DisableTrimming
Signed-off-by: Marco Pracucci <marco@pracucci.com>
By holding a `proto.Buffer` per shard and passing it down to where
marshalling is done, we avoid creating a lot of garbage.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Initial draft of prometheus-agent
This commit introduces a new binary, prometheus-agent, based on the
Grafana Agent code. It runs a WAL-only version of prometheus without the
TSDB, alerting, or rule evaluations. It is intended to be used to
remote_write to Prometheus or another remote_write receiver.
By default, prometheus-agent will listen on port 9095 to not collide
with the prometheus default of 9090.
Truncation of the WAL cooperates on a best-effort case with Remote
Write. Every time the WAL is truncated, the minimum timestamp of data to
truncate is determined by the lowest sent timestamp of all samples
across all remote_write endpoints. This gives loose guarantees that data
from the WAL will not try to be removed until the maximum sample
lifetime passes or remote_write starts functionining.
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* add tests for Prometheus agent (#22)
* add tests for Prometheus agent
* add tests for Prometheus agent
* rearranged tests as per the review comments
* update tests for Agent
* changes as per code review comments
Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com>
* incremental changes to prometheus agent
Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com>
* changes as per code review comments
Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com>
* Commit feedback from code review
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* Port over some comments from grafana/agent
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* Rename agent.Storage to agent.DB for tsdb consistency
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* Consolidate agentMode ifs in cmd/prometheus/main.go
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* Document PreAction usage requirements better for agent mode flags
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* remove unnecessary defaultListenAddr
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* `go fmt ./tsdb/agent` and fix lint errors
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
Co-authored-by: SriKrishna Paparaju <paparaju@gmail.com>
* expose NewChainSampleIterator func
Signed-off-by: Ben Ye <ben.ye@bytedance.com>
* add comment
Signed-off-by: Ben Ye <ben.ye@bytedance.com>
* update comments
Signed-off-by: Ben Ye <ben.ye@bytedance.com>
A lot of this code was hacked together, literally during a
hackathon. This commit intends not to change the code substantially,
but just make the code obey the usual style practices.
A (possibly incomplete) list of areas:
* Generally address linter warnings.
* The `pgk` directory is deprecated as per dev-summit. No new packages should
be added to it. I moved the new `pkg/histogram` package to `model`
anticipating what's proposed in #9478.
* Make the naming of the Sparse Histogram more consistent. Including
abbreviations, there were just too many names for it: SparseHistogram,
Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in
general. Only add "Sparse" if it is needed to avoid confusion with
conventional Histograms (which is rare because the TSDB really has no notion
of conventional Histograms). Use abbreviations only in local scope, and then
really abbreviate (not just removing three out of seven letters like in
"Histo"). This is in the spirit of
https://github.com/golang/go/wiki/CodeReviewComments#variable-names
* Several other minor name changes.
* A lot of formatting of doc comments. For one, following
https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences
, but also layout question, anticipating how things will look like
when rendered by `godoc` (even where `godoc` doesn't render them
right now because they are for unexported types or not a doc comment
at all but just a normal code comment - consistency is queen!).
* Re-enabled `TestQueryLog` and `TestEndopints` (they pass now,
leaving them disabled was presumably an oversight).
* Bucket iterator for histogram.Histogram is now created with a
method.
* HistogramChunk.iterator now allows iterator recycling. (I think
@dieterbe only commented it out because he was confused by the
question in the comment.)
* HistogramAppender.Append panics now because we decided to treat
staleness marker differently.
Signed-off-by: beorn7 <beorn@grafana.com>
We are re-enabling HTTP 2 again. There has been a few bugfixes upstream
in go, and we have also enabled ReadIdleTimeout.
Fix#7588Fix#9068
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
Redact any basic auth passwords in the remote write URL (which are
technically allowed although not recommended) when used as metric
labels.
Signed-off-by: Nick Pillitteri <nick.pillitteri@grafana.com>
* Add initial support for exemplar to the remote write receiver endpoint
Signed-off-by: Serge Catudal <serge.catudal@gmail.com>
* Update storage remote write handler tests with exemplars
Signed-off-by: Serge Catudal <serge.catudal@gmail.com>
* Update remote write handler in order to have a distinct checkAppendExemplarError function from scrape
Signed-off-by: Serge Catudal <serge.catudal@gmail.com>
* Fix `kuma_sd` targetgroup reporting (#9157)
* Bundle all xDS targets into a single group
Signed-off-by: austin ce <austin.cawley@gmail.com>
* Snapshot in-memory chunks on shutdown for faster restarts (#7229)
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Rename links
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Remove Individual Data Type Caps in Per-shard Buffering for Remote Write (#8921)
* Moved everything to nPending buffer
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Simplify exemplar capacity addition
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added pre-allocation
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Don't allocate if not sending exemplars
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Avoid deadlock when processing duplicate series record (#9170)
* Avoid deadlock when processing duplicate series record
`processWALSamples()` needs to be able to send on its output channel
before it can read the input channel, so reads to allow this in case the
output channel is full.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* processWALSamples: update comment
Previous text seems to relate to an earlier implementation.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Optimise WAL loading by removing extra map and caching min-time (#9160)
* BenchmarkLoadWAL: close WAL after use
So that goroutines are stopped and resources released
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* BenchmarkLoadWAL: make series IDs co-prime with #workers
Series are distributed across workers by taking the modulus of the
ID with the number of workers, so multiples of 100 are a poor choice.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* BenchmarkLoadWAL: simulate mmapped chunks
Real Prometheus cuts chunks every 120 samples, then skips those samples
when re-reading the WAL. Simulate this by creating a single mapped chunk
for each series, since the max time is all the reader looks at.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Fix comment
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Remove series map from processWALSamples()
The locks that is commented to reduce contention in are now sharded
32,000 ways, so won't be contended. Removing the map saves memory and
goes just as fast.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* loadWAL: Cache the last mmapped chunk time
So we can skip calling append() for samples it will reject.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Improvements from code review
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Full stops and capitals on comments
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Cache max time in both places mmappedChunks is updated
Including refactor to extract function `setMMappedChunks`, to reduce
code duplication.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Update head min/max time when mmapped chunks added
This ensures we have the correct values if no WAL samples are added for
that series.
Note that `mSeries.maxTime()` was always `math.MinInt64` before, since
that function doesn't consider mmapped chunks.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Split Go and React Tests (#8897)
* Added go-ci and react-ci
Co-authored-by: Julien Pivotto <roidelapluie@inuits.eu>
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Remove search keymap from new expression editor (#9184)
Signed-off-by: Julius Volz <julius.volz@gmail.com>
Co-authored-by: Austin Cawley-Edwards <austin.cawley@gmail.com>
Co-authored-by: Levi Harrison <git@leviharrison.dev>
Co-authored-by: Julien Pivotto <roidelapluie@inuits.eu>
Co-authored-by: Bryan Boreham <bjboreham@gmail.com>
Co-authored-by: Julius Volz <julius.volz@gmail.com>
* Moved everything to nPending buffer
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Simplify exemplar capacity addition
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added pre-allocation
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Don't allocate if not sending exemplars
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Refactor: pass segment-reading function as param
To allow a different implementation to be used when garbage-collecting.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* remote_write: reduce blocking from GC of series
Add a method `UpdateSeriesSegment()` which is used together with
`SeriesReset()` to garbage-collect old series. This allows us to
split the lock around queueManager series data and avoid blocking
`Append()` while reading series from the last checkpoint.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Cosmetic: review feedback on comments
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* remote-write benchmark: include GC of series
Reduce the total number of samples per iteration from 5000*5000
(25 million) which is too big for my laptop, to 1*10000.
Extend `createTimeseries()` to add additional labels, so that the
queue manager is doing more realistic work.
Move the Append() call to a background goroutine - this works because
TestWriteClient uses a WaitGroup to signal completion.
Call `StoreSeries()` and `SeriesReset()` while adding samples, to
simulate the garbage-collection that wal.Watcher does.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Change BenchmarkSampleDelivery to call UpdateSeriesSegment
This matches what Watcher.garbageCollectSeries() is doing now
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Push the matchers for LabelNames all the way into the index.
NB This doesn't actually implement it in the index, just plumbs it through for now...
Signed-off-by: Tom Wilkie <tom@grafana.com>
* Hack it up. Does not work.
Signed-off-by: Tom Wilkie <tom@grafana.com>
* Revert changes I don't understand
Can't see why do we need to hold a mutex on symbols, and the purpose of
the LabelNamesFor method.
Maybe I'll need to re-add this later.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Implement LabelNamesFor
This method provides the label names that appear in the postings
provided. We do that deeper than the label values because we know
beforehand that most of the label names we'll be the same across
different postings, and we don't want to go down an up looking up the
same symbols for all different series.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Mutex on symbols should be unlocked
However, I still don't understand why do we need a mutex here.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Fix head.LabelNamesFor
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Implement mockIndex LabelNames with matchers
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Nitpick on slice initialisation
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Add tests for LabelNamesWithMatchers
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Fix the mutex mess on head.LabelValues/LabelNames
I still don't see why we need to grab that unrelated mutex, but at least
now we're grabbing it consistently
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Check error after iterating postings
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Use the error from posting when there was en error in postings
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Update storage/interface.go comment
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Update tsdb/index/index.go comment
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Update tsdb/index/index.go wrapped error msg
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Update tsdb/index/index.go wrapped error msg
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Update tsdb/index/index.go warpped error msg
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Remove unneeded comment
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Add testcases for LabelNames w/matchers in api.go
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Use t.Cleanup() instead of defer in tests
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Tom Wilkie <tom@grafana.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Create experimental circular buffer resize method, benchmarks
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Optimize exemplar resize to only replay as many exemplars as needed
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* More comments, benchmark AddExemplar
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* optimizations
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* comment
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Slight refactor of resize benchmark + make use of resize via runtime
reloadable storage config.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Some more config related changes.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address some review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address more review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Refactor to remove usage of noopExemplarStorage and avoid race condition
when resizing from Head code.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Fix or add comments to clarify some of the new behaviour.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* fix potential panics related to negative exemplar buffer lengths
Signed-off-by: Callum Styan <callumstyan@gmail.com>
Co-authored-by: Callum Styan <callumstyan@gmail.com>
* Append sparse histograms into the Head block
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Add AtHistogram() to Iterator interface. Make HistoChunk conform to Chunk interface.
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Added MaxSamplesPerSend
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added tests
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Fixed order of require
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added docs
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* writes -> writesReceived
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Improved send loop
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Write exemplars to the WAL and send them over remote write.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Update example for exemplars, print data in a more obvious format.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Add metrics for remote write of exemplars.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Fix incorrect slices passed to send in remote write.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* We need to unregister the new metrics.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address review comments
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Order of exemplar append vs write exemplar to WAL needs to change.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Condense sample/exemplar delivery tests to parameterized sub-tests
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Rename test methods for clarity now that they also handle exemplars
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Rename counter variable. Fix instances where metrics were not updated correctly
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Add exemplars to LoadWAL benchmark
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* last exemplars timestamp metric needs to convert value to seconds with
ms precision
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Process exemplar records in a separate go routine when loading the WAL.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address review comments related to clarifying comments and variable
names. Also refactor sample/exemplar to enqueue prompb types.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Regenerate types proto with comments, update protoc version again.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Put remote write of exemplars behind a feature flag.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address some of Ganesh's review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Move exemplar remote write feature flag to a config file field.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address Bartek's review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Don't allocate exemplar buffers in queue_manager if we're not going to
send exemplars over remote write.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Add ValidateExemplar function, validate exemplars when appending to head
and log them all to WAL before adding them to exemplar storage.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address more reivew comments from Ganesh.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Add exemplar total label length check.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address a few last review comments
Signed-off-by: Callum Styan <callumstyan@gmail.com>
Co-authored-by: Martin Disibio <mdisibio@gmail.com>
The purpose of GetRef() is to allow Append() to be called without
the caller needing to copy the labels. To avoid a race where a series
is removed from TSDB between the calls to GetRef() and Append(), we
return TSDB's copy of the labels.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Add method to get reference number for TSDB Appender
In situations where we need to copy labels before calling Add(),
GetRef() allows to check first, then call AddFast() in the case that the series
is already known.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Add explicit interface for GetRef() method
Suggested in code review by @bwplotka
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Rename OptionalGetRef to GetRef
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Simplify return value of GetRef()
0 can be relied on to mean 'no reference'
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Contribute grafana/agent sigv4 code
* address review feedback
- move validation logic for RemoteWrite into unmarshal
- copy configuration fields from ec2 SD config
- remove enabled field, use pointer for enabling sigv4
* Update config/config.go
* Don't provide credentials if secret key / access key left blank
* Add SigV4 headers to the list of unchangeable headers.
* sigv4: don't include all headers in signature
* only test for equality in the authorization header, not the signed date
* address review feedback
1. s/httpClientConfigEnabled/httpClientConfigAuthEnabled
2. bearer_token tuples to "authorization"
3. Un-export NewSigV4RoundTripper
* add x-amz-content-sha256 to list of unchangeable headers
* Document sigv4 configuration
* add suggestion for using default AWS SDK credentials
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
Co-authored-by: Julien Pivotto <roidelapluie@gmail.com>
* Move remote read handler to remote package.
This follows the pattern I started with the remote write handler. The api/v1 package is getting pretty cluttered. Moving code to other packages helps reduce this size and also makes it reusable - eg Cortex doesn't do streaming remote writes yet, and will very soon.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
* Deal with a nil remoteReadHandler for tests.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
* Remove the global metrics.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
* Fix test.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
* Review feedback.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
This moves the label lookup into TSDB, whilst still keeping the cached-ref optimisation for repeated Appends.
This makes the API easier to consume and implement. In particular this change is motivated by the scrape-time-aggregation work, which I don't think is possible to implement without it as it needs access to label values.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
* Consider status code 429 as recoverable errors to avoid resharding.
* Adds support for Retry-After in backoff logic in remote storage.
Signed-off-by: Harkishen-Singh <harkishensingh@hotmail.com>
- Remove unrelated changes
- Refactor code out of the API module - that is already getting pretty crowded.
- Don't track reference for AddFast in remote write. This has the potential to consume unlimited server-side memory if a malicious client pushes a different label set for every series. For now, its easier and safer to always use the 'slow' path.
- Return 400 on out of order samples.
- Use remote.DecodeWriteRequest in the remote write adapters.
- Put this behing the 'remote-write-server' feature flag
- Add some (very) basic docs.
- Used named return & add test for commit error propagation
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
* Testify: move to require
Moving testify to require to fail tests early in case of errors.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* More moves
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* MultiError: Refactored MultiError for more concise and safe usage.
* Less lines
* Goland IDE was marking every usage of old MultiError "potential nil" error
* It was easy to forgot using Err() when error was returned, now it's safely assured on compile time.
NOTE: Potentially I would rename package to merrors. (: In different PR.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Addressed review comments.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Addressed comments.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fix after rebase.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
Currently there is no way of tracking the value of the
`max_samples_per_send` configuration option, which is commonly tweaked
when integrating with a remote write backend.
Signed-off-by: Jorge Luis Betancourt Gonzalez <jorge-luis.betancourt@trivago.com>
* Refactor test assertions
This pull request gets rid of assert.True where possible to use
fine-grained assertions.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Refactor global vars to avoid failure with run test more than once.
Signed-off-by: Harkishen-Singh <harkishensingh@hotmail.com>
* Register highestRecvTimestamp metric.
Signed-off-by: Harkishen-Singh <harkishensingh@hotmail.com>
* Use local interner vars.
Signed-off-by: Harkishen-Singh <harkishensingh@hotmail.com>
* Declare interner in write storage.
Signed-off-by: Harkishen-Singh <harkishensingh@hotmail.com>
The remote read client needs to use the nethttp.Transport wrapper in
order for spans to be instrumented properly.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
* Exposes remote write client to allow for customizations to the http client
Signed-off-by: Joe Elliott <number101010@gmail.com>
* Removed changes to vendored file
Signed-off-by: Joe Elliott <number101010@gmail.com>
This also fixes a bug in query_log_file, which now is relative to the config file like all other paths.
Signed-off-by: Andy Bursavich <abursavich@gmail.com>
I did not want to move those in previous PR to make it easier to review. Now small cleanup time for readability. (:
## Changes
* Merge series goes to `storage/merge.go` leaving `fanout.go` for just fanout code.
* Moved `fanout test` code from weird separate package to storage.
* Unskiped one test: TestFanout_SelectSorted/chunk_querier
* Moved block series set codes responsible for querying blocks to `querier.go` from `compact.go`
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* tsdb: Added ChunkQueryable implementations to db; unified compactor, querier and fanout block iterating.
Chained to https://github.com/prometheus/prometheus/pull/7059
* NewMerge(Chunk)Querier now takies multiple primaries allowing tsdb DB code to use it.
* Added single SeriesEntry / ChunkEntry for all series implementations.
* Unified all vertical, and non vertical for compact and querying to single
merge series / chunk sets by reusing VerticalSeriesMergeFunc for overlapping algorithm (same logic as before)
* Added block (Base/Chunk/)Querier for block querying. We then use populateAndTomb(Base/Chunk/) to iterate over chunks or samples.
* Refactored endpoint tests and querier tests to include subtests.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Addressed comments from Brian and Beorn.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed snapshot test and added chunk iterator support for DBReadOnly.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed race when iterating over Ats first.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed tests.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed populate block tests.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed endpoints test.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed test.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Added test & fixed case of head open chunk.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed DBReadOnly tests and bug producing 1 sample chunks.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Added cases for partial block overlap for multiple full chunks.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Added extra tests for chunk meta after compaction.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed small vertical merge bug and added more tests for that.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* storage: Replace usage of sync/atomic with uber-go/atomic
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* tsdb: Replace usage of sync/atomic with uber-go/atomic
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* web: Replace usage of sync/atomic with uber-go/atomic
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* notifier: Replace usage of sync/atomic with uber-go/atomic
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* cmd: Replace usage of sync/atomic with uber-go/atomic
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* scripts: Verify that we are not using restricted packages
It checks that we are not directly importing 'sync/atomic'.
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* Reorganise imports in blocks
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* notifier/test: Apply PR suggestions
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* storage/remote: avoid storing references on newEntry
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* Revert "scripts: Verify that we are not using restricted packages"
This reverts commit 278d32748e.
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* web: Group imports accordingly
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
Right now Queue Manager metrics are registered when the metrics struct
is created, which happens before a changed queue is shutdown and the old
metrics are unregistered. In the case of named queues or updates to
external labels the apply config will panic due to duplicate metrics.
Instead, register the metrics as part of starting the queue as we always
guarantee that Stop will be called before a new Start.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
* Pending Samples metric includes samples in channel
The pending samples metric should also include samples waiting in the
channels to be sent to provide a more accurate measure. In addition,
make sure that the pending samples is reset to 0 anytime a queue is
started as we remake all of the shards at that time.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
* Log the number of dropped samples on hard shutdown
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
* Fixed nits introduced by https://github.com/prometheus/prometheus/pull/7334
* Added ChunkQueryable implementation to fanout and readyStorage.
* Added more comments.
* Changed NewVerticalChunkSeriesMerger to CompactingChunkSeriesMerger, removed tiny interface by reusing VerticalSeriesMergeFunc for overlapping algorithm for
both chunks and series, for both querying and compacting (!) + made sure duplicates are merged.
* Added ErrChunkSeriesSet
* Added Samples interface for seamless []promb.Sample to []tsdbutil.Sample conversion.
* Deprecating non chunks serieset based StreamChunkedReadResponses, added chunk one.
* Improved tests.
* Split remote client into Write (old storage) and read.
* Queryable client is now SampleAndChunkQueryable. Since we cannot use nice QueryableFunc I moved
all config based options to sampleAndChunkQueryableClient to aboid boilerplate.
In next commit: Changes for TSDB.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Add errors and Warnings to SeriesSet
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Change Querier interface and refactor accordingly
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Refactor promql/engine to propagate warnings at eval stage
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Address review issues
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Make sure all the series from all Selects are pre-advanced
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Address review issues
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Separate merge series sets
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Clean
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Refactor merge querier failure handling
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Refactored and simplified fanout with improvements from incoming chunk iterator PRs.
* Secondary logic is hidden, instead of weird failed series set logic we had.
* Fanout is well commented
* Fanout closing record all errors
* MergeQuerier improved API (clearer)
* deferredGenericMergeSeriesSet is not needed as we return no samples anyway for failed series sets (next = false).
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fix formatting
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Fix CI issues
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Added final tests for error handling.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Addressed Brian's comments.
* Moved hints in populate to be allocated only when needed.
* Used sync.Once in secondary Querier to achieve all-or-nothing partial response logic.
* Select after first Next is done will panic.
NOTE: in lazySeriesSet in theory we could just panic, I think however we can
totally just return error, it will panic in expand anyway.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Utilize errWithWarnings
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Fix recently introduced expansion issue
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Add tests for secondary querier error handling
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Implement lazy merge
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Add name to test cases
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Reorganize
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Address review comments
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Address review comments
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Remove redundant warnings
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Fix rebase mistake
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
* increase the remote write bucket range
Increase the range of remote write buckets to capture times above 10s for laggy scenarios
Buckets had been: {.005, .01, .025, .05, .1, .25, .5, 1, 2.5, 5, 10}
Buckets are now: {0.03125, 0.0625, 0.125, 0.25, 0.5, 1, 2, 4, 8, 16, 32, 64, 128, 256, 512}
Signed-off-by: Bert Hartmann <berthartm@gmail.com>
* revert back to DefBuckets with addons to be backwards compatible
Signed-off-by: Bert Hartmann <berthartm@gmail.com>
* shuffle the buckets to maintain 2-2.5x increases
Signed-off-by: Bert Hartmann <berthartm@gmail.com>
* added the prometheus_remote_storage_remote_read_queries_total query
Signed-off-by: njingco <jingco.nicole@gmail.com>
* adjusted the help label of remoteReadQueriesTotal
Signed-off-by: njingco <jingco.nicole@gmail.com>
* Trace Remote Write requests
Signed-off-by: Cody Boggs <cboggs@splunk.com>
* Refactor store attempts to keep code flow clearer, and avoid so many places to deal with span finishing
Signed-off-by: Cody Boggs <cboggs@splunk.com>
Right now any new metrics added for remote write need to be added to
both the QueueManager struct, and the queueManagerMetrics struct.
Instead, use the queueManagerMetrics struct directly from QueueManager.
The newQueueManagerMetrics constructor will now create the metrics for a
specific queue with name and endpoint pre-populated, and a new copy of
the struct will be created specifically for each queue.
This also fixes a bug where prometheus_remote_storage_sent_bytes_total
is not being unregistered after a queue is changed.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
If the server is returning non-recoverable errors, such as if we are
trying to push samples that are too old, remote write will never
reshard. Non-recoverable errors should be treated the same as success
for the purpose of resharding, just as we do with sample rates and
durations.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
Remake the http client whenever ApplyConfig is called. This allows
secrets to be updated without needing to restart an otherwise unchanged
queue.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
* storage: Added Chunks{Queryable/Querier/SeriesSet/Series/Iteratable. Added generic Merge{SeriesSet/Querier} implementation.
## Rationales:
In many places (e.g. chunk Remote read, Thanos Receive fetching chunk from TSDB), we operate on encoded chunks not samples.
This means that we unnecessary decode/encode, wasting CPU, time and memory.
This PR adds chunk iterator interfaces and makes the merge code to be reused between both seriesSets
I will make the use of it in following PR inside tsdb itself. For now fanout implements it and mergers.
All merges now also allows passing series mergers. This opens doors for custom deduplications other than TSDB vertical ones (e.g. offline one we have in Thanos).
## Changes
* Added Chunk versions of all iterating methods. It all starts in Querier/ChunkQuerier. The plan is that
Storage will implement both chunked and samples.
* Added Seek to chunks.Iterator interface for iterating over chunks.
* NewMergeChunkQuerier was added; Both this and NewMergeQuerier are now using generigMergeQuerier to share the code. Generic code was added.
* Improved tests.
* Added some TODO for further simplifications in next PRs.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Addressed Brian's comments.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Moved s/Labeled/SeriesLabels as per Krasi suggestion.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Addressed Krasi's comments.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Second iteration of Krasi comments.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Another round of comments.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
This is technically BREAKING CHANGE, but it was like this from the beginning: I just notice that we rely in
Prometheus on remote read being sorted. This is because we use selected data from remote reads in MergeSeriesSet
which rely on sorting.
I found during work on https://github.com/prometheus/prometheus/pull/5882 that
we do so many repetitions because of this, for not good reason. I think
I found a good balance between convenience and readability with just one method.
Smaller the interface = better.
Also I don't know what TestSelectSorted was testing, but now it's testing sorting.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fix bug with WAL watcher and Live Reader metrics usage.
Calling NewXMetrics when creating a Watcher or LiveReader results in a
registration error, which we're ignoring, and as a result other than the
first Watcher/Reader created, we had no metrics for either. So we would
only have metrics like Watcher Records Read for the first remote write
config in a users config file.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
I think the previous behavior is problematic as it will leave
`memSeries` around that still have `pendingCommit` set to `true`.
The only case where this can happen in this code path is a failure to
write to the WAL, in which case we are probably in trouble anyway. I
believe, however, we should still try to do the right thing and do the
full rollback. This will implicitly try to write to the WAL again, but
this time without samples, which may even succeed. (But we propagate
the previous error in any case.)
This also adds `a.head.putSeriesBuffer(a.sampleSeries)` to Rollback,
which was previously missing.
Signed-off-by: beorn7 <beorn@grafana.com>
* Change createTimeseries to take values for number of series and number
of samples per series.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Take num of samples to expect in expectSampleCount instead of array of
samples.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Add field to TestStorageClient to ignore samples sent waitgroup for
potential tests where we don't care about delivery of all samples.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Fix up tests a little bit.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
