This commit creates a (so far unused) package. It contains the a custom
lexer/parser for the query language.
ast.go: New AST that interacts well with the parser.
lex.go: Custom lexer (new).
lex_test.go: Lexer tests (new).
parse.go: Custom parser (new).
parse_test.go: Parser tests (new).
functions.go: Changed function type, dummies for parser testing (barely changed/dummies).
printer.go: Adapted from rules/ and adjusted to new AST (mostly unchanged, few additions).
Also, clean up some things in the code (especially introduction of the
chunkLenWithHeader constant to avoid the same expression all over the place).
Benchmark results:
BEFORE
BenchmarkLoadChunksSequentially 5000 283580 ns/op 152143 B/op 312 allocs/op
BenchmarkLoadChunksRandomly 20000 82936 ns/op 39310 B/op 99 allocs/op
BenchmarkLoadChunkDescs 10000 110833 ns/op 15092 B/op 345 allocs/op
AFTER
BenchmarkLoadChunksSequentially 10000 146785 ns/op 152285 B/op 315 allocs/op
BenchmarkLoadChunksRandomly 20000 67598 ns/op 39438 B/op 103 allocs/op
BenchmarkLoadChunkDescs 20000 99631 ns/op 12636 B/op 192 allocs/op
Note that everything is obviously loaded from the page cache (as the
benchmark runs thousands of times with very small series files). In a
real-world scenario, I expect a larger impact, as the disk operations
will more often actually hit the disk. To load ~50 sequential chunks,
this reduces the iops from 100 seeks and 100 reads to 1 seek and 1
read.
The one central sample ingestion channel has caused a variety of
trouble. This commit removes it. Targets and rule evaluation call an
Append method directly now. To incorporate multiple storage backends
(like OpenTSDB), storage.Tee forks the Append into two different
appenders.
Note that the tsdb queue manager had its own queue anyway. It was a
queue after a queue... Much queue, so overhead...
Targets have their own little buffer (implemented as a channel) to
avoid stalling during an http scrape. But a new scrape will only be
started once the old one is fully ingested.
The contraption of three pipelined ingesters was removed. A Target is
an ingester itself now. Despite more logic in Target, things should be
less confusing now.
Also, remove lint and vet warnings in ast.go.
A number of mostly minor things:
- Rename chunk type -> chunk encoding.
- After all, do not carry around the chunk encoding to all parts of
the system, but just have one place where the encoding for new
chunks is set based on the flag. The new approach has caveats as
well, but the polution of so many method signatures is worse.
- Use the default chunk encoding for new chunks of existing
series. (Previously, only new _series_ would get chunks with the
default encoding.)
- Use an enum for chunk encoding. (But keep the version number for the
flag, for reasons discussed previously.)
- Add encoding() to the chunk interface (so that a chunk knows its own
encoding - no need to have that in a different top-level function).
- Got rid of newFollowUpChunk (which would keep the existing encoding
for all chunks of a time series). Now only use newChunk(), which
will create a chunk encoding according to the flag.
- Simplified transcodeAndAdd.
- Reordered methods of deltaEncodedChunk and doubleDeltaEncoded chunk
to match the order in the chunk interface.
- Only transcode if the chunk is not yet half full. If more than half
full, add a new chunk instead.
This checks for the basic behaviour of GetFingerprintsForLabelMatchers, that is, whether the different matcher types filter the correct fingerprints and intersections are correct.
The capacity is basically how many persisted head chunks we will count
at most while doing other things, in particular checkpointing. To
limit the amount of already counted head chunks, keep this number low,
otherwise we will easily checkpoint too often if checkpoints take long
anyway.
In that commit, the 'maintainSeries' call was accidentally removed.
This commit refactors things a bit so that there is now a clean
'maintainMemorySeries' and a 'maintainArchivedSeries' call.
Straighten the nomenclature a bit (consistently use 'drop' for
chunks and 'purge' for series/metrics).
Remove the annoying 'Completed maintenance sweep through archived
fingerprints' message if there were no archived fingerprints to do
maintenance on.
This is done by bucketing chunks by fingerprint. If the persisting to
disk falls behind, more and more chunks are in the queue. As soon as
there are "double hits", we will now persist both chunks in one go,
doubling the disk throughput (assuming it is limited by disk
seeks). Should even more pile up so that we end wit "triple hits", we
will persist those first, and so on.
Even if we have millions of time series, this will still help,
assuming not all of them are growing with the same speed. Series that
get many samples and/or are not very compressable will accumulate
chunks faster, and they will soon get double- or triple-writes.
To improve the chance of double writes,
-storage.local.persistence-queue-capacity could be set to a higher
value. However, that will slow down shutdown a lot (as the queue has
to be worked through). So we leave it to the user to set it to a
really high value. A more fundamental solution would be to checkpoint
not only head chunks, but also chunks still in the persist queue. That
would be quite complicated for a rather limited use-case (running many
time series with high ingestion rate on slow spinning disks).
Starting a goroutine takes 1-2µs on my laptop. From the "numbers every
Go programmer should know", I had 300ns for a channel send in my
mind. Turns out, on my laptop, it takes only 60ns. That's fast enough
to warrant the machinery of yet another channel with a fixed set of
worker goroutines feeding from it. The number chosen (8 for now) is
low enough to not really afflict a measurable overhead (a big
Prometheus server has >1000 goroutines running), but high enough to
not make sample ingestion a bottleneck.
- Parallelize AppendSamples as much as possible without breaking the
contract about temporal order.
- Allocate more fingerprint locker slots.
- Do not run early checkpoints if we are behind on chunk persistence.
- Increase fpMinWaitDuration to give the disk more time for more
important things.
Also, switch math.MaxInt64 and math.MinInt64 to the new constants.
Also, set a much higher default value.
Chunk persist requests can be quite spiky. If you collect a large
number of time series that are very similar, they will tend to finish
up a chunk at about the same time. There is no reason we need to back
up scraping just because of that. The rationale of the new default
value is "1/8 of the chunks in memory".
persistence.go is way too long anyway, and a lot of code is just crash
recovery, which is not important to understand the normal operation.
Also, remove unused `exists` function.
Previously, it would return an error instead. Now we can distinguish
the cases 'error while deleting known key' vs. 'key not in index'
without testing for leveldb-internal kinds of errors.
If queries are still running when the shutdown is initiated, they will
finish _during_ the shutdown. In that case, they might request chunk
eviction upon unpinning their pinned chunks. That might completely
fill the evict request queue _after_ draining it during storage
shutdown. If that ever happens (which is the case if there are _many_
queries still running during shutdown), the affected queries will be
stuck while keeping a fingerprint locked. The checkpointing can then
not process that fingerprint (or one that shares the same lock). And
then we are deadlocked.
- Move CONTRIBUTORS.md to the more common AUTHORS.
- Added the required NOTICE file.
- Changed "Prometheus Team" to "The Prometheus Authors".
- Reverted the erroneous changes to the Apache License.
This mimics the locking leveldb is performing anyway. Advantages of
doing it separately:
- Should we ever replace the leveldb implementation by one without
double-start protection, we are still good.
- In contrast to leveldb, the new code creates a meaningful error
message.
Usually, if you unarchive a series, it is to add something to it,
which will create a new head chunk. However, if a series in
unarchived, and before anything is added to it, it is handled by the
maintenance loop, it will be archived again. In that case, we have to
load the chunkDescs to know the lastTime of the series to be
archived. Usually, this case will happen only rarely (as a race, has
never happened so far, possibly because the locking around unarchiving
and the subsequent sample append is smart enough). However, during
crash recovery, we sometimes treat series as "freshly unarchived"
without directly appending a sample. We might add more cases of that
type later, so better deal with archiving properly and load chunkDescs
if required.
- Documented checkpoint file format.
- High-level description of series sanitation.
- Replace fp.LoadFromString panic with an error.
(Change in client_golang already submitted.)
- Introduced checks for series file size where appropriate.
- Removed two Law of Demeter violations.
Change-Id: I555d97a2c8f4769820c2fc8bf5d6f4e160222abc
- Delete unneeded file view_adapter.go.
- Assessed that we still need the fingerprints in nodes
(to create iterators).
- Turned numMemChunkDescs into a metric.
Change-Id: I29be963c795a075ec00c095f76bf26405535609d
Now only purge if there is something to purge.
Also, set savedFirstTime and archived time range appropriately.
(Which is needed for the optimization.)
Change-Id: Idcd33319a84def3ce0318d886f10c6800369e7f9
Fix the behavior if preload for non-existent series is requested.
Instead of returning an error (which triggers a panic further up),
simply count those incidents. They can happen regularly, we just want
to know if they happen too frequently because that would mean the
indexing is behind or broken.
Change-Id: I4b2d1b93c4146eeea897d188063cb9574a270f8b
The root cause was that after chunkDesc eviction, the offset between
memory representation of chunk layout (via chunkDescs in memory) was
shiftet against chunks as layed out on disk. Keeping the offset up to
date is by no means trivial, so this commit is pretty involved.
Also, found a race that for some reason didn't bite us so far:
Persisting chunks was completel unlocked, so if chunks were purged on
disk at the same time, disaster would strike. However, locking the
persisting of chunk revealed interesting dead locks. Basically, never
queue under the fp lock.
Change-Id: I1ea9e4e71024cabbc1f9601b28e74db0c5c55db8
Checkpointing interval is now a command line flag.
Along the way, several things were refactored.
- Restructure the way the storage is started and stopped..
- Number of series in checkpoint is now a uint64, not a varint.
(Breaks old checkpoints, needs wipe!)
- More consistent naming and order of methods.
Change-Id: I883d9170c9a608ee716bb0ab3d0ded8ca03760d9
Add gauge for chunks and chunkdescs in memory (backed by a global
variable to be used later not only for instrumentation but also for
memory management).
Refactored instrumentation code once more (instrumentation.go is back :).
Change-Id: Ife39947e22a48cac4982db7369c231947f446e17
- Staleness delta is no a proper function parameter and not replicated
from package ast.
- Named type 'chunks' replaced by explicit '[]chunk' to avoid confusion.
- For the same reason, replaced 'chunkDescs' by '[]*chunkDescs'.
- Verified that math.Modf is not a speed enhancement over conversion
(actually 5x slower).
- Renamed firstTimeField, lastTimeField into chunkFirstTime and
chunkLastTime.
- Verified unpin() is sufficiently goroutine-safe.
- Decided not to update archivedFingerprintToTimeRange upon series
truncation and added a rationale why.
Change-Id: I863b8d785e5ad9f71eb63e229845eacf1bed8534
- Head chunk persisting only happens in evictOlderThan, so do it
there. (With the previous code, it would never happen.)
- Raw accesses to chunkDesc.chunk are now done via isEvicted (with
locking).
Change-Id: I48b07b56dfea4899b50df159b4ea566954396fcd
Also, fix problems in shutdown.
Starting serving and shutdown still has to be cleaned up properly.
It's a mess.
Change-Id: I51061db12064e434066446e6fceac32741c4f84c
Some other improvements on the way, in particular codec -> codable
renaming and addition of LookupSet methods.
Change-Id: I978f8f3f84ca8e4d39a9d9f152ae0ad274bbf4e2
Most important, the heads file will now persist all the chunk descs,
too. Implicitly, it will serve as the persisted form of the
fp-to-series map.
Change-Id: Ic867e78f2714d54c3b5733939cc5aef43f7bd08d
BinaryMarshaler instead of encodable.
BinaryUnmarshaler instead of decodable.
Left 'codable' in place for lack of a better word.
Change-Id: I8a104be7d6db916e8dbc47ff95e6ff73b845ac22
