The operator changes the meaning of the metric, so the metric name should
be dropped. Technically this would be a breaking change, but it's also very
obviously a bug and not likely that anyone depends on it.
Signed-off-by: Julius Volz <julius.volz@gmail.com>
Convert QueryOpts to an interface so that downstream projects like
https://github.com/thanos-community/promql-engine could extend the query
options with engine specific options that are not in the original
engine.
Will be used to enable query analysis per-query.
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@vinted.com>
Handle more arithmetic operators and aggregators for native histograms
This includes operators for multiplication (formerly known as scaling), division, and subtraction. Plus aggregations for average and the avg_over_time function.
Stdvar and stddev will (for now) ignore histograms properly (rather than counting them but adding a 0 for them).
Signed-off-by: Jeanette Tan <jeanette.tan@grafana.com>
Wiser coders than myself have come to the conclusion that a `switch`
statement is almost always superior to a statement that includes any
`else if`.
The exceptions that I have found in our codebase are just these two:
* The `if else` is followed by an additional statement before the next
condition (separated by a `;`).
* The whole thing is within a `for` loop and `break` statements are
used. In this case, using `switch` would require tagging the `for`
loop, which probably tips the balance.
Why are `switch` statements more readable?
For one, fewer curly braces. But more importantly, the conditions all
have the same alignment, so the whole thing follows the natural flow
of going down a list of conditions. With `else if`, in contrast, all
conditions but the first are "hidden" behind `} else if `, harder to
spot and (for no good reason) presented differently from the first
condition.
I'm sure the aforemention wise coders can list even more reasons.
In any case, I like it so much that I have found myself recommending
it in code reviews. I would like to make it a habit in our code base,
without making it a hard requirement that we would test on the CI. But
for that, there has to be a role model, so this commit eliminates all
`if else` occurrences, unless it is autogenerated code or fits one of
the exceptions above.
Signed-off-by: beorn7 <beorn@grafana.com>
We haven't updated golint-ci in our CI yet, but this commit prepares
for that.
There are a lot of new warnings, and it is mostly because the "revive"
linter got updated. I agree with most of the new warnings, mostly
around not naming unused function parameters (although it is justified
in some cases for documentation purposes – while things like mocks are
a good example where not naming the parameter is clearer).
I'm pretty upset about the "empty block" warning to include `for`
loops. It's such a common pattern to do something in the head of the
`for` loop and then have an empty block. There is still an open issue
about this: https://github.com/mgechev/revive/issues/810 I have
disabled "revive" altogether in files where empty blocks are used
excessively, and I have made the effort to add individual
`// nolint:revive` where empty blocks are used just once or twice.
It's borderline noisy, though, but let's go with it for now.
I should mention that none of the "empty block" warnings for `for`
loop bodies were legitimate.
Signed-off-by: beorn7 <beorn@grafana.com>
In other words: Instead of having a “polymorphous” `Point` that can
either contain a float value or a histogram value, use an `FPoint` for
floats and an `HPoint` for histograms.
This seemingly small change has a _lot_ of repercussions throughout
the codebase.
The idea here is to avoid the increase in size of `Point` arrays that
happened after native histograms had been added.
The higher-level data structures (`Sample`, `Series`, etc.) are still
“polymorphous”. The same idea could be applied to them, but at each
step the trade-offs needed to be evaluated.
The idea with this change is to do the minimum necessary to get back
to pre-histogram performance for functions that do not touch
histograms. Here are comparisons for the `changes` function. The test
data doesn't include histograms yet. Ideally, there would be no change
in the benchmark result at all.
First runtime v2.39 compared to directly prior to this commit:
```
name old time/op new time/op delta
RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8)
RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10)
RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9)
RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10)
```
And then runtime v2.39 compared to after this commit:
```
name old time/op new time/op delta
RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8)
RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8)
RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10)
RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9)
RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9)
```
In summary, the runtime doesn't really improve with this change for
queries with just a few steps. For queries with many steps, this
commit essentially reinstates the old performance. This is good
because the many-step queries are the one that matter most (longest
absolute runtime).
In terms of allocations, though, this commit doesn't make a dent at
all (numbers not shown). The reason is that most of the allocations
happen in the sampleRingIterator (in the storage package), which has
to be addressed in a separate commit.
Signed-off-by: beorn7 <beorn@grafana.com>
query_samples_total is a counter that tracks the total number of samples loaded by all queries.
The goal with this metric is to be able to see the amount of 'work' done by Prometheus to service queries.
At the moment we have metrics with the number of queries, plus more detailed metrics showing how much time each step of a query takes.
While those metrics do help they don't show us the whole picture.
Queries that do load more samples are (in general) more expensive than queries that do load fewer samples.
This means that looking only at the number of queries doesn't tell us how much 'work' Prometheus received.
Adding a counter that tracks the total number of samples loaded allows us to see if there was a spike in the cost of queries, not just the number of them.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
* Use zeropool.Pool to workaround SA6002
I built a tiny library called https://github.com/colega/zeropool to
workaround the SA6002 staticheck issue.
While searching for the references of that SA6002 staticheck issues on
Github first results was Prometheus itself, with quite a lot of ignores
of it.
This changes the usages of `sync.Pool` to `zeropool.Pool[T]` where a
pointer is not available.
Also added a benchmark for HeadAppender Append/Commit when series
already exist, which is one of the most usual cases IMO, as I didn't find
any.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Improve BenchmarkHeadAppender with more cases
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* A little copying is better than a little dependency
https://www.youtube.com/watch?v=PAAkCSZUG1c&t=9m28s
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Fix imports order
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Add license header
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Copyright should be on one of the first 3 lines
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Use require.Equal for testing
I don't depend on testify in my lib, but here we have it available.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Avoid flaky test
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Also use zeropool for pointsPool in engine.go
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
---------
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
It took a `Labels` where the memory could be re-used, but in practice
this hardly ever benefitted. Especially after converting `relabel.Process`
to `relabel.ProcessBuilder`.
Comparing the parameter to `nil` was a bug; `EmptyLabels` is not `nil`
so the slice was reallocated multiple times by `append`.
Lastly `Builder.Labels()` now estimates that the final size will depend
on labels added and deleted.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
We have a LabelBuilder in EvalNodeHelper; use it instead of creating a new one at every step.
Need to take some care that different uses of enh.lb do not overlap.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
We use `labels.Builder` to parse metrics, to avoid depending on the
internal implementation. This is not efficient, but the feature is only
used in tests. It wasn't efficient previously either - calling `Sort()`
after adding each label.
`createLabelsForAbsentFunction` also uses a Builder now, and gets
an extra `map` to replace the previous `Has()` usage.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Fix up promql to compile with changes to Labels
Patterned after `Chunk.Iterator()`: pass the old iterator in so it
can be re-used to avoid allocating a new object.
(This commit does not do any re-use; it is just changing all the method
signatures so re-use is possible in later commits.)
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
If we are populating series for a subquery then set the interval
parameter accordingly so that downstream users could use that
information.
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@vinted.com>
Use new experimental package `golang.org/x/exp/slices`.
slices.Sort works on values that are directly comparable, like ints,
so avoids the overhad of an interface call to `.Less()`.
Left tests unchanged, because they don't need the speed and it may be
a cross-check that slices.Sort gives the same answer.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* model/relabel: Add benchmark
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* model/relabel: re-use Builder across relabels
Saves memory allocations.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* labels.Builder: allow re-use of result slice
This reduces memory allocations where the caller has a suitable slice available.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* model/relabel: re-use source values slice
To reduce memory allocations.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Unwind one change causing test failures
Restore original behaviour in PopulateLabels, where we must not overwrite the input set.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* relabel: simplify values optimisation
Use a stack-based array for up to 16 source labels, which will be the
vast majority of cases.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* lint
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
We print the stacktrace of a panic when query causes one, but there's no
information about the query itself, which makes it harder to debug and
reproduce the issue.
This adds the 'expr' string to the logged panic.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
* Labels: create signature with/without labels
Instead of creating a new Labels slice then converting to signature,
go directly to the signature and save time.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Labels: refactor Builder tests
Have one test with a range of cases, and have them check the final
output rather than checking the internal structure of the Builder.
Also add a couple of cases where the value is "", which should be
interpreted as 'delete'.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Labels: add 'Keep' function to Builder
This lets us replace `Labels.WithLabels` with the more general `Builder`.
In `engine.resultMetric()` we can call `Keep()` instead of checking
and calling `Del()`.
Avoid calling `Sort()` in `Builder.Labels()` if we didn't add anything,
so that `Keep()` has the same performance as `WithLabels()`.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
For conventional histograms, we need to gather all the individual
bucket timeseries at a data point to do the quantile calculation. The
code so far mirrored this behavior for the new native
histograms. However, since a single data point contains all the
buckets alreade, that's actually not needed. This PR simplifies the
code while still detecting a mix of conventional and native
histograms.
The weird signature calculation for the conventional histograms is
getting even weirder because of that. If this PR turns out to do the
right thing, I will implement a proper fix for the signature
calculation upstream.
Signed-off-by: beorn7 <beorn@grafana.com>
This exactly corresponds to the statistic compared against MaxSamples
during the course of query execution, so users can see how close their
queries are to a limit.
Co-authored-by: Harkishen Singh <harkishensingh@hotmail.com>
Co-authored-by: Andrew Bloomgarden <blmgrdn@amazon.com>
Signed-off-by: Andrew Bloomgarden <blmgrdn@amazon.com>
We always track total samples queried and add those to the standard set
of stats queries can report.
We also allow optionally tracking per-step samples queried. This must be
enabled both at the engine and query level to be tracked and rendered.
The engine flag is exposed via a Prometheus feature flag, while the
query flag is set when stats=all.
Co-authored-by: Alan Protasio <approtas@amazon.com>
Co-authored-by: Andrew Bloomgarden <blmgrdn@amazon.com>
Co-authored-by: Harkishen Singh <harkishensingh@hotmail.com>
Signed-off-by: Andrew Bloomgarden <blmgrdn@amazon.com>
This follows the line of argument that the invariant of not looking
ahead of the query time was merely emerging behavior and not a
documented stable feature. Any query that looks ahead of the query
time was simply invalid before the introduction of the negative offset
and the @ modifier.
Signed-off-by: beorn7 <beorn@grafana.com>
This can happen if the aggregation starts with a float and later
encounters a histogram. In that case, the newly encountered histogram
would have been added to a nil histogram.
This should be tested, of course, but that's best done within the
PromQL testing framework, which we still need to enable for histograms
(for which we have a TODO in the code and now also a card in the GH
project).
Signed-off-by: beorn7 <beorn@grafana.com>
* MergeFloatBucketIterator for []FloatBucketIterator
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* histogram_quantile for histograms
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix histogram_quantile
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Unit test and enhancements
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Iterators to iterate buckets in reverse and all buckets together including zero bucket
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Consider all buckets for histogram_quantile and fix the implementation
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Remove unneeded code
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix lint
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
`BufferedSeriesIterator` and `MemoizedSeriesIterator` use a method
called `Values` for exactly the purpose for which all other iterators
of the same kind use a method called `At`. That alone is confusing,
but on top of that, the `Values` method only returns a single sample,
not multiple values. I assume the naming has historical reasons. This
commit makes it more consistent. It is now easier to read, and now
`BufferedSeriesIterator` and `MemoizedSeriesIterator` implement
`chunkenc.Iterator` like many other iterators, too.
Signed-off-by: beorn7 <beorn@grafana.com>
- Pick At... method via return value of Next/Seek.
- Do not clobber returned buckets.
- Add partial FloatHistogram suppert.
Note that the promql package is now _only_ dealing with
FloatHistograms, following the idea that PromQL only knows float
values.
As a byproduct, I have removed the histogramSeries metric. In my
understanding, series can have both float and histogram samples, so
that metric doesn't make sense anymore.
As another byproduct, I have converged the sampleBuf and the
histogramSampleBuf in memSeries into one. The sample type stored in
the sampleBuf has been extended to also contain histograms even before
this commit.
Signed-off-by: beorn7 <beorn@grafana.com>
This is to avoid copying the many fields of a histogram.Histogram all
the time.
This also fixes a bunch of formerly broken tests.
Signed-off-by: beorn7 <beorn@grafana.com>
* Add test case to showcase the problem in #9590
Signed-off-by: Thomas Jackson <jacksontj.89@gmail.com>
* Don't unwrap ParenExpr in newStepInvariantExpr
Fixes#9590
Signed-off-by: Thomas Jackson <jacksontj.89@gmail.com>
This creates a new `model` directory and moves all data-model related
packages over there:
exemplar labels relabel rulefmt textparse timestamp value
All the others are more or less utilities and have been moved to `util`:
gate logging modetimevfs pool runtime
Signed-off-by: beorn7 <beorn@grafana.com>
* promql: copy data when short-circuiting
Because the range query loop re-uses the output buffer each time round,
we must copy results into the buffer rather than using input as output.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Add benchmark case for many-to-one join
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* query_range: compute join signatures just once
For an expression like `a + on(p,q) b`, extract the `p,q` part from each
series once, instead of re-computing at every step of the range.
Although there was a cache, computing the key by concatenating all
labels was expensive.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Add benchmark for query_range with topk
Modify sample data so values within a metric differ
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Optimise topk where k==1
In this case we don't need a heap to keep track of values; just a single
slot is fine.
Simplify the initialization of the heap: since all cases start off as a
single-item heap we can just assign the value directly.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Allow at least one slot in results for topk, quantile
k isn't set for quantile, but we need space to start collecting values
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
In the previous version, 1.18.0, the "megacheck" linter paid attention
to the '//lint:ignore' comment, but that is no longer there.
Newer version pay attention to '//nolint:<linter>,<linter>,...'
comments, optionally followed by a "second" comment introduced by '//'.
Update the directives to use this style.
This is related to prometheus/blackbox_exporter#738 and
prometheus/blackbox_exporter#745.
Signed-off-by: Marcelo E. Magallon <marcelo.magallon@grafana.com>
This commit adds `@ <timestamp>` modifier as per this design doc: https://docs.google.com/document/d/1uSbD3T2beM-iX4-Hp7V074bzBRiRNlqUdcWP6JTDQSs/edit.
An example query:
```
rate(process_cpu_seconds_total[1m])
and
topk(7, rate(process_cpu_seconds_total[1h] @ 1234))
```
which ranks based on last 1h rate and w.r.t. unix timestamp 1234 but actually plots the 1m rate.
Signed-off-by: Ganesh Vernekar <cs15btech11018@iith.ac.in>
* promql: Removed global and add ability to have better interval for subqueries if not specified
## Changes
* Refactored tests for better hints testing
* Added various TODO in places to enhance.
* Moved DefaultEvalInterval global to opts with func(rangeMillis int64) int64 function instead
Motivation: At Thanos we would love to have better control over the subqueries step/interval.
This is important to choose proper resolution. I think having proper step also does not harm for
Prometheus and remote read users. Especially on stateless querier we do not know evaluation interval
and in fact putting global can be wrong to assume for Prometheus even.
I think ideally we could try to have at least 3 samples within the range, the same
way Prometheus UI and Grafana assumes.
Anyway this interfaces allows to decide on promQL user basis.
Open question: Is taking parent interval a smart move?
Motivation for removing global: I spent 1h fighting with:
=== RUN TestEvaluations
TestEvaluations: promql_test.go:31: unexpected error: error evaluating query "absent_over_time(rate(nonexistant[5m])[5m:])" (line 687): unexpected error: runtime error: integer divide by zero
--- FAIL: TestEvaluations (0.32s)
FAIL
At the end I found that this fails on most of the versions including this master if you run this test alone. If run together with many
other tests it passes. This is due to SetDefaultEvaluationInterval(1 * time.Minute)
in test that is ran before TestEvaluations. Thanks to globals (:
Let's fix it by dropping this global.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Added issue links for TODOs.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Removed irrelevant changes.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Add errors and Warnings to SeriesSet
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Change Querier interface and refactor accordingly
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Refactor promql/engine to propagate warnings at eval stage
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Address review issues
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Make sure all the series from all Selects are pre-advanced
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Address review issues
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Separate merge series sets
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Clean
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Refactor merge querier failure handling
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Refactored and simplified fanout with improvements from incoming chunk iterator PRs.
* Secondary logic is hidden, instead of weird failed series set logic we had.
* Fanout is well commented
* Fanout closing record all errors
* MergeQuerier improved API (clearer)
* deferredGenericMergeSeriesSet is not needed as we return no samples anyway for failed series sets (next = false).
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fix formatting
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Fix CI issues
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Added final tests for error handling.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Addressed Brian's comments.
* Moved hints in populate to be allocated only when needed.
* Used sync.Once in secondary Querier to achieve all-or-nothing partial response logic.
* Select after first Next is done will panic.
NOTE: in lazySeriesSet in theory we could just panic, I think however we can
totally just return error, it will panic in expand anyway.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Utilize errWithWarnings
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Fix recently introduced expansion issue
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Add tests for secondary querier error handling
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Implement lazy merge
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Add name to test cases
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Reorganize
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Address review comments
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Address review comments
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Remove redundant warnings
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Fix rebase mistake
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Use go1.14 new hash/maphash to hash both RHS and LHS instead of XOR'ing
which has been resulting in hash collisions.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Refactor engine labelset signature generation, just use labels.Labels
instead of hashes.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address review comments; function comments + store result of
lhs.String+rhs.String as key.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Replace all signatureFunc usage with signatureFuncString.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Make optimizations to labels String function and generation of rhs+lhs
as string in resultMetric.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Use separate string functions that don't use strconv just for engine
maps.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Use a byte invalid separator instead of quoting and have a buffer
attached to EvalNodeHelper instead of using a global pool in the labels
package.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address more review comments, labels has a function that now builds a
byte slice without turning it into a string.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Use two different non-ascii hex codes as byte separators between labels
and between sets of labels when building bytes of a Labels struct.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* We only need the 2nd byte invalid sep. at the beginning of a
labels.Bytes
Signed-off-by: Callum Styan <callumstyan@gmail.com>
This addresses fabxc's TODO.
More importantly, it now properly defers the
querier.Close(). Previously, if a panic happened after creation of the
querier within the populateSeries function, querier.Close() was never called.
The latter was responsible for #6977.
Signed-off-by: beorn7 <beorn@grafana.com>
This is technically BREAKING CHANGE, but it was like this from the beginning: I just notice that we rely in
Prometheus on remote read being sorted. This is because we use selected data from remote reads in MergeSeriesSet
which rely on sorting.
I found during work on https://github.com/prometheus/prometheus/pull/5882 that
we do so many repetitions because of this, for not good reason. I think
I found a good balance between convenience and readability with just one method.
Smaller the interface = better.
Also I don't know what TestSelectSorted was testing, but now it's testing sorting.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Make lookbackDelta a option of QueryEngine
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* julius' suggestion
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* remove trivial getter
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Assume lookback delta is always > 0
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* add debug log
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* don't expose loopback delta
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Specify that lookack delta is also used in federation
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Fix federation test
While we have added some logic to the promql engine to keep it backwards
compatible and have a 5 minute loopback by default, the web/ package is
likely to really be internal to Prometheus and we should not add the
same kind of heuritstics here.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* loopback delta: Fix debug log
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
Since we use ActiveQueryTracker to check for concurrency in
d992c36b3a it does not make sense to keep
the MaxConcurrent value as an option of the PromQL engine.
This pull request removes it from the PromQL engine options, sets the
max concurrent metric to -1 if there is no active query tracker, and use
the value of the active query tracker otherwise.
It removes dead code and also will inform people who import the promql
package that we made that change, as it breaks the EngineOpts struct.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Move check for empty VectorSelector to typeChecking
* Move check for twice set metric name to typeChecking
* Make child of MatrixSelector a general Node
* rename checkType to checkAST
* Rename fail to addParseErr
* Remove trailing whitespace
Signed-off-by: Tobias Guggenmos <tguggenm@redhat.com>
For yacc generated parsers there is the convention to capitalize the names of item types provided by the lexer, which makes it easy to distinct lexer tokens (capitalized) from nonterminal symbols (not capitalized) in language grammars.
This convention is also followed by the (non generated) go compiler (see https://golang.org/pkg/go/token/#Token).
Part of the parser rewrite described in #6256.
Signed-off-by: Tobias Guggenmos <tguggenm@redhat.com>
* Added query logging for prometheus.
Options added:
1) active.queries.filepath: Filename where queries will be recorded
2) active.queries.filesize: Size of the file where queries will be recorded.
Functionality added:
All active queries are now logged in a file. If prometheus crashes unexpectedly, these queries are also printed out on stdout in the rerun.
Queries are written concurrently to an mmaped file, and removed once they are done. Their positions in the file are reused. They are written in json format. However, due to dynamic nature of application, the json has an extra comma after the last query, and is missing an ending ']'. There may also null bytes in the tail of file.
Signed-off-by: Advait Bhatwadekar <advait123@ymail.com>
With the next release of client_golang, Summaries will not have
objectives by default. To not lose the objectives we have right now,
explicitly state the current default objectives.
Signed-off-by: beorn7 <beorn@grafana.com>
For my benchmarks on aggregation this reduces allocations by ~5% (~10%
time improvement):
```
benchmark old ns/op new ns/op delta
BenchmarkEvaluations/benchdata/aggregators.test/promxy-4 727692 649626 -10.73%
benchmark old allocs new allocs delta
BenchmarkEvaluations/benchdata/aggregators.test/promxy-4 2566 2434 -5.14%
benchmark old bytes new bytes delta
BenchmarkEvaluations/benchdata/aggregators.test/promxy-4 162760 148854 -8.54%
```
Signed-off-by: Thomas Jackson <jacksontj.89@gmail.com>
The documentation for Context states that this is just as good:
// If Done is not yet closed, Err returns nil.
// If Done is closed, Err returns a non-nil error
Signed-off-by: Bryan Boreham <bryan@weave.works>
i) Uses the more idiomatic Wrap and Wrapf methods for creating nested errors.
ii) Fixes some incorrect usages of fmt.Errorf where the error messages don't have any formatting directives.
iii) Does away with the use of fmt package for errors in favour of pkg/errors
Signed-off-by: tariqibrahim <tariq181290@gmail.com>
* Expose lexer item types
We have generally agreed to expose AST types / values that are necessary
to make sense of the AST outside of the promql package. Currently the
`UnaryExpr`, `BinaryExpr`, and `AggregateExpr` AST nodes store the lexer
item type to indicate the operator type, but since the individual item
types aren't exposed, an external user of the package cannot determine
the operator type. So this PR exposes them.
Although not all item types are required to make sense of the AST (some
are really only used in the lexer), I decided to expose them all here to
be somewhat more consistent. Another option would be to not use lexer
item types at all in AST nodes.
The concrete motivation is my work on the PromQL->Flux transpiler, but
this ought to be useful for other cases as well.
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Fix item type names in tests
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* *: use latest release of staticcheck
It also fixes a couple of things in the code flagged by the additional
checks.
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Use official release of staticcheck
Also run 'go list' before staticcheck to avoid failures when downloading packages.
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
Since it is used in a type assertion, having it as an alias to the
error interface is the same as saying 'error', i.e. it succeeds for
all types of error. Change to a struct which is a concrete type and
the type assertion will only succeed if the type is identical.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* use Welford/Knuth method to compute standard deviation and variance, avoids float precision issues
* use better method for calculating avg and avg_over_time
Signed-off-by: Dan Cech <dcech@grafana.com>
* Allow for BufferedSeriesIterator instances to be created without an underlying iterator, to simplify their usage.
Signed-off-by: Alin Sinpalean <alin.sinpalean@gmail.com>
* Add Start/End to SelectParams
* Make remote read use the new selectParams for start/end
This commit will continue sending the start/end time of the remote read
query as the overarching promql time and the specific range of data that
the query is intersted in receiving a response to is now part of the
ReadHints (upstream discussion in #4226).
* Remove unused vendored code
The genproto.sh script was updated, but the code wasn't regenerated.
This simply removes the vendored deps that are no longer part of the
codegen output.
Signed-off-by: Thomas Jackson <jacksontj.89@gmail.com>
Right now promql won't time out a request if populating the iterators
takes a long time.
Signed-off-by: Thomas Jackson <jacksontj.89@gmail.com>
Fixes#4289
This changes the Walk/Inspect API inside the promql package to bubble
up errors. This is done by having the inspector return an error (instead
of a bool) and then bubbling that up in the Walk. This way if any error
is encountered in the Walk() the walk will stop and return the error.
This avoids issues where errors from the Querier where being ignored
(causing incorrect promql evaluation).
Signed-off-by: Thomas Jackson <jacksontj.89@gmail.com>
Fixes#4136
* Move range logic to 'eval'
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make aggregegate range aware
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* PromQL is statically typed, so don't eval to find the type.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Extend rangewrapper to multiple exprs
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Start making function evaluation ranged
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make instant queries a special case of range queries
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Eliminate evalString
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Evaluate range vector functions one series at a time
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make unary operators range aware
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make binops range aware
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Pass time to range-aware functions.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make simple _over_time functions range aware
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Reduce allocs when working with matrix selectors
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Add basic benchmark for range evaluation
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Reuse objects for function arguments
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Do dropmetricname and allocating output vector only once.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Add range-aware support for range vector functions with params
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Optimise holt_winters, cut cpu and allocs by ~25%
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make rate&friends range aware
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make more functions range aware. Document calling convention.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make date functions range aware
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make simple math functions range aware
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Convert more functions to be range aware
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make more functions range aware
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Specialcase timestamp() with vector selector arg for range awareness
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Remove transition code for functions
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Remove the rest of the engine transition code
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Remove more obselete code
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Remove the last uses of the eval* functions
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Remove engine finalizers to prevent corruption
The finalizers set by matrixSelector were being called
just before the value they were retruning to the pool
was then being provided to the caller. Thus a concurrent query
could corrupt the data that the user has just been returned.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Add new benchmark suite for range functinos
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Migrate existing benchmarks to new system
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Expand promql benchmarks
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Simply test by removing unused range code
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* When testing instant queries, check range queries too.
To protect against subsequent steps in a range query being
affected by the previous steps, add a test that evaluates
an instant query that we know works again as a range query
with the tiimestamp we care about not being the first step.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Reuse ring for matrix iters. Put query results back in pool.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Reuse buffer when iterating over matrix selectors
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Unary minus should remove metric name
Cut down benchmarks for faster runs.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Reduce repetition in benchmark test cases
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Work series by series when doing normal vectorSelectors
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Optimise benchmark setup, cuts time by 60%
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Have rangeWrapper use an evalNodeHelper to cache across steps
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Use evalNodeHelper with functions
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Cache dropMetricName within a node evaluation.
This saves both the calculations and allocs done by dropMetricName
across steps.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Reuse input vectors in rangewrapper
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Reuse the point slices in the matrixes input/output by rangeWrapper
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make benchmark setup faster using AddFast
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Simplify benchmark code.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Add caching in VectorBinop
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Use xor to have one-level resultMetric hash key
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Add more benchmarks
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Call Query.Close in apiv1
This allows point slices allocated for the response data
to be reused by later queries, saving allocations.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Optimise histogram_quantile
It's now 5-10% faster with 97% less garbage generated for 1k steps
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make the input collection in rangeVector linear rather than quadratic
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Optimise label_replace, for 1k steps 15x fewer allocs and 3x faster
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Optimise label_join, 1.8x faster and 11x less memory for 1k steps
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Expand benchmarks, cleanup comments, simplify numSteps logic.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Address Fabian's comments
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Comments from Alin.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Address jrv's comments
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Remove dead code
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Address Simon's comments.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Rename populateIterators, pre-init some sizes
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Handle case where function has non-matrix args first
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Split rangeWrapper out to rangeEval function, improve comments
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Cleanup and make things more consistent
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Make EvalNodeHelper public
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Fabian's comments.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
This attempts to close#3973.
Handles cases where the length of the input vector to an aggregate topk
/ bottomk function is less than the K paramater. The change updates
Prometheus to allocate a result vector the same length as the input
vector in these cases.
Previously Prometheus would out-of-memory panic for large K values. This
change makes that unlikely unless the size of the input vector is
equally large.
Signed-off-by: David King <dave@davbo.org>
This adds a parameter to the storage selection interface which allows
query engine(s) to pass information about the operations surrounding a
data selection.
This can for example be used by remote storage backends to infer the
correct downsampling aggregates that need to be provided.
