mirror of
https://github.com/prometheus/prometheus.git
synced 2024-11-15 18:14:06 -08:00
92 lines
5.4 KiB
Markdown
92 lines
5.4 KiB
Markdown
# An overview of different Series and Chunk reference types
|
|
|
|
## Used by callers of TSDB
|
|
|
|
| Location | Series access | Chunk access |
|
|
|--------------------|--------------------------------|--------------------------------------------------------------------|
|
|
| Global interfaces | `SeriesRef` (in postings list) | `chunks.ChunkRef` (`ChunkReader` interface, `Meta.Ref`) |
|
|
| Head | `HeadSeriesRef` (autoinc) | `HeadChunkRef` (could be head chunk or mmapped chunk. 5/3B split) |
|
|
| blocks | `BlockSeriesRef` (16B aligned) | `BlockChunkRef` (4/4B split) |
|
|
|
|
### `SeriesRef`
|
|
|
|
Note: we cover the implementations as used in Prometheus. Other projects may use different implementations.
|
|
|
|
#### `HeadSeriesRef`
|
|
|
|
`HeadSeriesRef` is simply a 64bit counter that increments when a new series comes in.
|
|
Due to series churn, the set of actively used `HeadSeriesRef`s may be well above zero (e.g. 0-10M may not be used, and 10M-11M is active)
|
|
|
|
Usage:
|
|
* [`stripeSeries`](https://github.com/prometheus/prometheus/blob/fdbc40a9efcc8197a94f23f0e479b0b56e52d424/tsdb/head.go#L1292-L1298) (note: when you don't know a `HeadSeriesRef` for a series, you can also access it by a hash of the series' labels)
|
|
* WAL
|
|
* `HeadChunkRef`s include them for addressing head chunks, as those are owned by the `memSeries`.
|
|
|
|
Notes:
|
|
1) M-mapped Head chunks, while they use `HeadSeriesRef`s, don't contain an index and depend on the series listing in memory.
|
|
Once mmapped, chunks have `HeadSeriesRef`s inside them, allowing you to recreate the index from reading chunks
|
|
(Along with WAL which has the labels for those `HeadSeriesRef`s. It also has all those samples, but by using m-mapped chunks we can save cpu/time and not replay all of WAL on startup)
|
|
|
|
2) During querying, `HeadSeriesRef` are limited to 2^40 (see `HeadChunkRef`)
|
|
|
|
3) The last `HeadSeriesRef` is always replayed from the WAL and is continued from there.
|
|
|
|
#### `BlockSeriesRef`
|
|
|
|
Persistent blocks are independent entities and the format/structure is completely different from head block.
|
|
|
|
In blocks, series are lexicographically ordered by labels and the byte offset in the index file (divided by 16 because they're all aligned on 16 bytes) becomes the `BlockSeriesRef`.
|
|
|
|
They are not sequential because index entries may be multiples of 16 bytes. And they don't start from 0 because the byte offset is absolute and includes the magic number, symbols table, etc.
|
|
|
|
`BlockSeriesRef` are only 32 bits for now, because 64 bits would slow down the postings lists disk access. (note: this limits the index size to 2^32 * 16 = 64 GB)
|
|
|
|
|
|
See also:
|
|
* https://ganeshvernekar.com/blog/prometheus-tsdb-persistent-block-and-its-index/#3-index
|
|
* https://ganeshvernekar.com/blog/prometheus-tsdb-persistent-block-and-its-index/#c-series
|
|
|
|
### `ChunkRef`
|
|
|
|
Chunk references are used to load chunk data during query execution.
|
|
Note: we cover the implementations as used in Prometheus. Other projects may use different implementations.
|
|
|
|
#### `HeadChunkRef`
|
|
|
|
A `HeadChunkRef` is an 8 byte integer that packs together:
|
|
|
|
* 5 Bytes for `HeadSeriesRef`.
|
|
* 3 Bytes for `HeadChunkID` (uint64) (see below).
|
|
|
|
There are two implications here:
|
|
|
|
* While `HeadSeriesRef`s can during ingestion go higher, during querying they are limited to 2^40. Querying too high numbers will lead to query failures (but not impact ingestion).
|
|
* `ChunkID` keeps growing as we enter new chunks until Prometheus restarts. If Prometheus runs too long, we might hit 2^24.
|
|
([957 years](https://www.wolframalpha.com/input/?i=2%5E24+*+120+*+15+seconds+in+years) at 1 sample per 15 seconds). If `ChunkID=len(mmappedchunks)` then it's the head chunk.
|
|
|
|
#### `BlockChunkRef`
|
|
|
|
A `BlockChunkRef` is an 8 byte integer. Unlike `HeadChunkRef`, it is static and independent of factors such as Prometheus restarting.
|
|
|
|
It packs together:
|
|
|
|
* 4 Bytes for chunk file index in the block. This number just increments. Filenames [start at 1](https://ganeshvernekar.com/blog/prometheus-tsdb-persistent-block-and-its-index/#contents-of-a-block)
|
|
but the `BlockChunkRef` start at 0.
|
|
* 4 Bytes for the byte offset within the file.
|
|
|
|
#### Why does `HeadChunkRef` contain a series reference and `BlockChunkRef` does not?
|
|
|
|
The `ChunkRef` types allow retrieving the chunk data as efficiently as possible.
|
|
* In the Head block the chunks are in the series struct. So we need to reach the series before we can access the chunk from it.
|
|
Hence we need to pack the `HeadSeriesRef` to get to the series.
|
|
* In persistent blocks, the chunk files are separated from the index and static. Hence you only need the co-ordinates within the `chunks` directory
|
|
to get to the chunk. Hence no need of `BlockSeriesRef`.
|
|
|
|
## Used internally in TSDB
|
|
|
|
* [`HeadChunkID`](https://pkg.go.dev/github.com/prometheus/prometheus/tsdb/chunks#HeadChunkID) references a chunk of a `memSeries` (either an `mmappedChunk` or `headChunk`).
|
|
If a caller has, for whatever reason, an "old" `HeadChunkID` that refers to a chunk that has been compacted into a block, querying the memSeries for it will not return any data.
|
|
* [`ChunkDiskMapperRef`](https://pkg.go.dev/github.com/prometheus/prometheus/tsdb/chunks#ChunkDiskMapperRef) is an 8 Byte integer.
|
|
4 Bytes are used to refer to a chunks file number and 4 bytes serve as byte offset (similar to `BlockChunkRef`). `mmappedChunk` provide this value such that callers can load the mmapped chunk from disk.
|
|
|