Since netdev metrics are now read from netlink instead of `/proc/net/dev`, we
can't easily spoof them for the end-to-end tests by reading a fixture file in
place of `/proc/net/dev`.
Therefore, we only get metrics for `lo` and ignore those that would return
unpredictable values (i.e. the byte and packet counters).
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
Now that we read some data from `/run/udev/data`, add the corresponding
fixtures and update the expected test results accordingly.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
Allow filtering APR entries based on device. Useful for ignoring
entries for network namespaces (containers).
Signed-off-by: Ben Kochie <superq@gmail.com>
* Expose metric for state=check for node_md_state
* Added new e2e output fixture including md201 which is in checking state and a the new state=check labeled metric for all other md
Signed-off-by: Christian Rohmann <github@frittentheke.de>
* Two new states will be added to the tcpstat collector called rx_queued_bytes and tx_queued_bytes.
For UDP datagrams an additional collector 'udp_queues' can be used to expose the total lengths of the tx_queue and rx_queue.
@SuperQ and @discordianfish this changes gives us the option to check for overloaded UDP + TCP processing.
The names of the new TCP states and the UDP metric can be discussed.
The current reasons are just:
I don't want to add another collector for the same exposed file, so I just added the new states to the tcpstat collector.
I chose the name 'udp_queue' instead of 'udpstat' as UDP has no state.
Signed-off-by: Peter Bueschel <peter.bueschel@logmein.com>
* Add diskstat flush request counters for Linux 5.5+
* Update tests for diskstat flush request counters with Linux 5.5+
Signed-off-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Use the extra information gleaned from the mountinfo file to add
a 'mountaddr' field for NFS metrics. This helps prevent prometheus from
ignoring mounts that come from the same URL, but are actually from
different IP addresses.
This commit also rebases to current master
Signed-off-by: Dipack P Panjabi <dpanjabi@hudson-trading.com>
* Closes issue #261 on node_exporter.
Delegated mdstat parsing to procfs project. mdadm_linux.go now only exports the metrics.
-> Added disk labels: "fail", "spare", "active" to indicate disk status
-> hanged metric node_md_disks_total ==> node_md_disks_required
-> Removed test cases for mdadm_linux.go, as the functionality they tested for has been moved to procfs project.
Signed-off-by: Advait Bhatwadekar <advait123@ymail.com>
* Update procfs vendor to pull in github.com/prometheus/procfs/pull/165
* Update mountstats collector to use new types.
* Rollover counter automatically to avoid float64 accuracy issues.
* Update e2e test.
Signed-off-by: Ben Kochie <superq@gmail.com>
This enables the collection of pressure stall information as exposed
by the `/proc/pressure` interface added in the 4.20 release of the
Linux kernel.
Closes#1174
Signed-off-by: Daniele Sluijters <daenney@users.noreply.github.com>
The format of /proc/diskstats is changing in linux-4.19 to include some
additional fields. See: https://www.kernel.org/doc/Documentation/iostats.txt
* collector/diskstats: use constants for some hard coded strings
* collector/diskstats: update diskstats for linux-4.19
* collector/diskstats: remove kernel doc url from individual metrics
Signed-off-by: Paul Gier <pgier@redhat.com>
* strip rootfs prefix for run in docker
* Use `/` as default value of path.rootfs, and parse mounts from `/proc/1/mounts`.
* No need to mount `/proc` and `/sys` because we share host's PID
namespace, which allows processes within the container to see all of the
processes on the system.
Closes: #66
Signed-off-by: Ivan Mikheykin <ivan.mikheykin@flant.com>
Signed-off-by: Yecheng Fu <cofyc.jackson@gmail.com>
PIDs can vanish (exit) from /proc/ between gathering the list of PIDs
and getting all of their stats.
* Ignore file not found errors.
* Explicitly count the PIDs we find.
* Cleanup some error style issues.
Signed-off-by: Ben Kochie <superq@gmail.com>
* vendor: Update prometheus/procfs
Signed-off-by: Hannes Körber <hannes.koerber@haktec.de>
* mountstats: Use new NFS protocol field
In https://github.com/prometheus/procfs/pull/100, the NFSTransportStats
struct was expanded by a field called protocol that specifies the NFS
protocol in use, either "tcp" or "udp". This commit adds the protocol as
a label to all NFS metrics exported via the mountstats collector.
Signed-off-by: Hannes Körber <hannes.koerber@haktec.de>
* Update fixtures for UDP mount
Signed-off-by: Hannes Körber <hannes.koerber@haktec.de>
* Send "Personality unknown" to debug, not info, remove unnecessary newline.
* Add support for "linear" personality.
* Always set number of active disks to 0 when a device is inactive.
* Add total disks calculation to unknown personalites.
Signed-off-by: Ben Kochie <superq@gmail.com>
Vmstat has over 100 fields, most of which are highly
detailed debug information. Trim this down to only
essential fields by default, configurable by flag.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* updates for zfsonlinux 0.7.5
* add constants for KSTAT_DATA_* types
* added e2e test for negative values represented by uint64 that can result from ZFS bugs
Linux "guest" metrics for VMs are already accounted for in node_cpu
`user` and `nice` metrics. Separate these into their own metric to
avoid duplication of data.
* Implement commonalities and linux support for ARP collection
* Add ARP collector to fixtures and run as part of e2e tests
* Bubble up scanner errors
* Use single return values where it makes sense
* Add missing annotation
* Move arp_common into arp_linux
* Add license header to arp_linux.go
* Address initial feedback
* Use strings.Fields instead of strings.Split
* Deal with scanner.Err() rather than throwing away errors
* Check for scan errors in-line before interacting with the entries map
* Don't interact with potentially empty text from scan
* Check for scan errors outside the scan loop
* Add comment about moving procfs parsing
* Add more direct comment
* Update initialism style to match go style guide
* Put function args on the same line
* Add TODO in front of comment about procfs extraction
* Guard against strings.Fields returning an empty slice
* Be more defensive about ARP table format and use upcase more broadly
* Enable the ARP collector by default
* Add ARP collector to the README
* Remove 'entry'
