* Add benchmark for sample delivery
* Simplify StoreSeries to have only one loop
* Reduce allocations for pending samples in runShard
* Only allocate one send slice per segment
* Cache a buffer in each shard for snappy to use
* Remove queue manager seriesMtx
It is not possible for any of the places protected by the seriesMtx to
be called concurrently so it is safe to remove. By removing the mutex we
can simplify the Append code to one loop.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
* Don't panic if we try to release a string that is not in the interner.
* Move seriesMtx locking in QueueManager's StoreSeries function.
This stops us from calling release for strings that aren't interned if
there's a race between reading a checkpoint and storing new series
labels, which could happen during checkpointing or reloading config.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Unregister remote write queue manager specific metrics when stopping the
queue manager.
* Use DeleteLabelValues instead of Unregister to remove queue and watcher
related metrics when we stop them. Create those metrics in the structs
start functions rather than in their constructors because of the
ordering of creation, start, and stop in remote storage ApplyConfig.
* Add setMetrics function to WAL watcher so we can set
the watchers metrics in it's Start function, but not
have to call Start in some tests (causes data race).
Signed-off-by: Callum Styan <callumstyan@gmail.com>
a string when there are no longer any refs. Add tests for interning.
Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com>
Signed-off-by: Callum Styan <callumstyan@gmail.com>
- Unmarshall external_labels config as labels.Labels, add tests.
- Convert some more uses of model.LabelSet to labels.Labels.
- Remove old relabel pkg (fixes#3647).
- Validate external label names.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
* Consistently pre-lookup the metrics for a given queue in queue manager.
* Don't open the WAL (for writing) in the remote_write code.
* Add some more logging.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
- Remove prometheus_remote_queue_last_send_timestamp_seconds metric. Its not particularly useful, we have highest_timestamp_seconds.
- Factor out maxGauage, a gauge that only increases.
- Change sharding calculations to use max samples in timestamp - max samples out timestamp (not rates).
- Also include the ratio of samples dropped to correctly predict number of pending samples.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
- Add a dropped samples EWMA and use it in calculating desired shards.
- Update metric names and a log messages.
- Limit number of entries in the dedupe logging middleware to prevent potential OOM.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
- If we're replaying the WAL to get series records, skip that segment when we hit corruptions.
- If we're tailing the WAL for samples, fail the watcher.
- When the watcher fails, restart from the latest checkpoint - and only send new samples by updating startTime.
- Tidy up log lines and error handling, don't return so many errors on quiting.
- Expect EOF when processing checkpoints.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
- Use the queue name in WAL watcher logging.
- Don't return from watch if the reader error was EOF.
- Fix sample timestamp check logic regarding what samples we send.
- Refactor so we don't need readToEnd/readSeriesRecords
- Fix wal_watcher tests since readToEnd no longer exists
Signed-off-by: Callum Styan <callumstyan@gmail.com>
- Remove datarace in the exported highest scrape timestamp.
- Backoff on enqueue should be per-sample - reset the result for each sample.
- Remove diffKeys, unused ctx and cancelfunc in WALWatcher, 'name' from writeTo interface, and pass it to constructor.
- Reorder functions in WALWatcher depth-first according to call graph.
- Fix vendor/modules.txt.
- Split out the various timer periods into consts at the top of the file.
- Move w.currentSegmentMetric.Set close to where we set the currentSegment.
- Combine r.Next() and isClosed(w.quit) into a single loop.
- Unnest some ifs in WALWatcher.watch, propagate erros in decodeRecord, add some new lines to make it easier to read.
- Reorganise checkpoint handling to reduce nesting and make it easier to follow.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down.
We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes.
Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases.
As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s).
This changes also includes the following optimisations:
- only marshal the proto request once, not once per retry
- maintain a single copy of the labels for given series to reduce GC pressure
Other minor tweaks:
- only reshard if we've also successfully sent recently
- add pending samples, latest sent timestamp, WAL events processed metrics
Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype)
Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes)
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* *: use latest release of staticcheck
It also fixes a couple of things in the code flagged by the additional
checks.
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Use official release of staticcheck
Also run 'go list' before staticcheck to avoid failures when downloading packages.
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
More than one remote_write destination can be configured, in which
case it's essential to know which one each log message refers to.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
This can happen in the situation where the system scales up the number of shards massively (to deal with some backlog), then scales it down again as the number of samples sent during the time period is less than the number received.
Each remote write endpoint gets its own set of relabeling rules.
This is based on the (yet-to-be-merged)
https://github.com/prometheus/prometheus/pull/2419, which removes legacy
remote write implementations.
* Add config, HTTP Basic Auth and TLS support to the generic write path.
- Move generic write path configuration to the config file
- Factor out config.TLSConfig -> tlf.Config translation
- Support TLSConfig for generic remote storage
- Rename Run to Start, and make it non-blocking.
- Dedupe code in httputil for TLS config.
- Make remote queue metrics global.
By splitting the single queue into multiple queues and flushing each individual queue in serially (and all queues in parallel), we can guarantee to preserve the order of timestampsin samples sent to downstream systems.
This gives up on the idea to communicate throuh the Append() call (by
either not returning as it is now or returning an error as
suggested/explored elsewhere). Here I have added a Throttled() call,
which has the advantage that it can be called before a whole _batch_
of Append()'s. Scrapes will happen completely or not at all. Same for
rule group evaluations. That's a highly desired behavior (as discussed
elsewhere). The code is even simpler now as the whole ingestion buffer
could be removed.
Logging of throttled mode has been streamlined and will create at most
one message per minute.
This change is conceptually very simple, although the diff is large. It
switches logging from "github.com/golang/glog" to
"github.com/prometheus/log", while not actually changing any log
messages. V(1)-style logging has been changed to be log.Debug*().
The one central sample ingestion channel has caused a variety of
trouble. This commit removes it. Targets and rule evaluation call an
Append method directly now. To incorporate multiple storage backends
(like OpenTSDB), storage.Tee forks the Append into two different
appenders.
Note that the tsdb queue manager had its own queue anyway. It was a
queue after a queue... Much queue, so overhead...
Targets have their own little buffer (implemented as a channel) to
avoid stalling during an http scrape. But a new scrape will only be
started once the old one is fully ingested.
The contraption of three pipelined ingesters was removed. A Target is
an ingester itself now. Despite more logic in Target, things should be
less confusing now.
Also, remove lint and vet warnings in ast.go.
- Move CONTRIBUTORS.md to the more common AUTHORS.
- Added the required NOTICE file.
- Changed "Prometheus Team" to "The Prometheus Authors".
- Reverted the erroneous changes to the Apache License.
- Always spell out the time unit (e.g. milliseconds instead of ms).
- Remove "_total" from the names of metrics that are not counters.
- Make use of the "Namespace" and "Subsystem" fields in the options.
- Removed the "capacity" facet from all metrics about channels/queues.
These are all fixed via command line flags and will never change
during the runtime of a process. Also, they should not be part of
the same metric family. I have added separate metrics for the
capacity of queues as convenience. (They will never change and are
only set once.)
- I left "metric_disk_latency_microseconds" unchanged, although that
metric measures the latency of the storage device, even if it is not
a spinning disk. "SSD" is read by many as "solid state disk", so
it's not too far off. (It should be "solid state drive", of course,
but "metric_drive_latency_microseconds" is probably confusing.)
- Brian suggested to not mix "failure" and "success" outcome in the
same metric family (distinguished by labels). For now, I left it as
it is. We are touching some bigger issue here, especially as other
parts in the Prometheus ecosystem are following the same
principle. We still need to come to terms here and then change
things consistently everywhere.
Change-Id: If799458b450d18f78500f05990301c12525197d3
- Mostly docstring fixed/additions.
(Please review these carefully, since most of them were missing, I
had to guess them from an outsider's perspective. (Which on the
other hand proves how desperately required many of these docstrings
are.))
- Removed all uses of new(...) to meet our own style guide (draft).
- Fixed all other 'go vet' and 'golint' issues (except those that are
not fixable (i.e. caused by bugs in or by design of 'go vet' and
'golint')).
- Some trivial refactorings, like reorder functions, minor renames, ...
- Some slightly less trivial refactoring, mostly to reduce code
duplication by embedding types instead of writing many explicit
forwarders.
- Cleaned up the interface structure a bit. (Most significant probably
the removal of the View-like methods from MetricPersistenc. Now they
are only in View and not duplicated anymore.)
- Removed dead code. (Probably not all of it, but it's a first
step...)
- Fixed a leftover in storage/metric/end_to_end_test.go (that made
some parts of the code never execute (incidentally, those parts
were broken (and I fixed them, too))).
Change-Id: Ibcac069940d118a88f783314f5b4595dce6641d5
Prometheus needs long-term storage. Since we don't have enough resources
to build our own timeseries storage from scratch ontop of Riak,
Cassandra or a similar distributed datastore at the moment, we're
planning on using OpenTSDB as long-term storage for Prometheus. It's
data model is roughly compatible with that of Prometheus, with some
caveats.
As a first step, this adds write-only replication from Prometheus to
OpenTSDB, with the following things worth noting:
1)
I tried to keep the integration lightweight, meaning that anything
related to OpenTSDB is isolated to its own package and only main knows
about it (essentially it tees all samples to both the existing storage
and TSDB). It's not touching the existing TieredStorage at all to avoid
more complexity in that area. This might change in the future,
especially if we decide to implement a read path for OpenTSDB through
Prometheus as well.
2)
Backpressure while sending to OpenTSDB is handled by simply dropping
samples on the floor when the in-memory queue of samples destined for
OpenTSDB runs full. Prometheus also only attempts to send samples once,
rather than implementing a complex retry algorithm. Thus, replication to
OpenTSDB is best-effort for now. If needed, this may be extended in the
future.
3)
Samples are sent in batches of limited size to OpenTSDB. The optimal
batch size, timeout parameters, etc. may need to be adjusted in the
future.
4)
OpenTSDB has different rules for legal characters in tag (label) values.
While Prometheus allows any characters in label values, OpenTSDB limits
them to a to z, A to Z, 0 to 9, -, _, . and /. Currently any illegal
characters in Prometheus label values are simply replaced by an
underscore. Especially when integrating OpenTSDB with the read path in
Prometheus, we'll need to reconsider this: either we'll need to
introduce the same limitations for Prometheus labels or escape/encode
illegal characters in OpenTSDB in such a way that they are fully
decodable again when reading through Prometheus, so that corresponding
timeseries in both systems match in their labelsets.
Change-Id: I8394c9c55dbac3946a0fa497f566d5e6e2d600b5