Handle more arithmetic operators and aggregators for native histograms
This includes operators for multiplication (formerly known as scaling), division, and subtraction. Plus aggregations for average and the avg_over_time function.
Stdvar and stddev will (for now) ignore histograms properly (rather than counting them but adding a 0 for them).
Signed-off-by: Jeanette Tan <jeanette.tan@grafana.com>
So far, if a target exposes a histogram with both classic and native
buckets, a native-histogram enabled Prometheus would ignore the
classic buckets. With the new scrape config option
`scrape_classic_histograms` set, both buckets will be ingested,
creating all the series of a classic histogram in parallel to the
native histogram series. For example, a histogram `foo` would create a
native histogram series `foo` and classic series called `foo_sum`,
`foo_count`, and `foo_bucket`.
This feature can be used in a migration strategy from classic to
native histograms, where it is desired to have a transition period
during which both native and classic histograms are present.
Note that two bugs in classic histogram parsing were found and fixed
as a byproduct of testing the new feature:
1. Series created from classic _gauge_ histograms didn't get the
_sum/_count/_bucket prefix set.
2. Values of classic _float_ histograms weren't parsed properly.
Signed-off-by: beorn7 <beorn@grafana.com>
Wiser coders than myself have come to the conclusion that a `switch`
statement is almost always superior to a statement that includes any
`else if`.
The exceptions that I have found in our codebase are just these two:
* The `if else` is followed by an additional statement before the next
condition (separated by a `;`).
* The whole thing is within a `for` loop and `break` statements are
used. In this case, using `switch` would require tagging the `for`
loop, which probably tips the balance.
Why are `switch` statements more readable?
For one, fewer curly braces. But more importantly, the conditions all
have the same alignment, so the whole thing follows the natural flow
of going down a list of conditions. With `else if`, in contrast, all
conditions but the first are "hidden" behind `} else if `, harder to
spot and (for no good reason) presented differently from the first
condition.
I'm sure the aforemention wise coders can list even more reasons.
In any case, I like it so much that I have found myself recommending
it in code reviews. I would like to make it a habit in our code base,
without making it a hard requirement that we would test on the CI. But
for that, there has to be a role model, so this commit eliminates all
`if else` occurrences, unless it is autogenerated code or fits one of
the exceptions above.
Signed-off-by: beorn7 <beorn@grafana.com>
We haven't updated golint-ci in our CI yet, but this commit prepares
for that.
There are a lot of new warnings, and it is mostly because the "revive"
linter got updated. I agree with most of the new warnings, mostly
around not naming unused function parameters (although it is justified
in some cases for documentation purposes – while things like mocks are
a good example where not naming the parameter is clearer).
I'm pretty upset about the "empty block" warning to include `for`
loops. It's such a common pattern to do something in the head of the
`for` loop and then have an empty block. There is still an open issue
about this: https://github.com/mgechev/revive/issues/810 I have
disabled "revive" altogether in files where empty blocks are used
excessively, and I have made the effort to add individual
`// nolint:revive` where empty blocks are used just once or twice.
It's borderline noisy, though, but let's go with it for now.
I should mention that none of the "empty block" warnings for `for`
loop bodies were legitimate.
Signed-off-by: beorn7 <beorn@grafana.com>
In the past, every sample value was a float, so it was fine to call a
variable holding such a float "value" or "sample". With native
histograms, a sample might have a histogram value. And a histogram
value is still a value. Calling a float value just "value" or "sample"
or "V" is therefore misleading. Over the last few commits, I already
renamed many variables, but this cleans up a few more places where the
changes are more invasive.
Note that we do not to attempt naming in the JSON APIs or in the
protobufs. That would be quite a disruption. However, internally, we
can call variables as we want, and we should go with the option of
avoiding misunderstandings.
Signed-off-by: beorn7 <beorn@grafana.com>
In other words: Instead of having a “polymorphous” `Point` that can
either contain a float value or a histogram value, use an `FPoint` for
floats and an `HPoint` for histograms.
This seemingly small change has a _lot_ of repercussions throughout
the codebase.
The idea here is to avoid the increase in size of `Point` arrays that
happened after native histograms had been added.
The higher-level data structures (`Sample`, `Series`, etc.) are still
“polymorphous”. The same idea could be applied to them, but at each
step the trade-offs needed to be evaluated.
The idea with this change is to do the minimum necessary to get back
to pre-histogram performance for functions that do not touch
histograms. Here are comparisons for the `changes` function. The test
data doesn't include histograms yet. Ideally, there would be no change
in the benchmark result at all.
First runtime v2.39 compared to directly prior to this commit:
```
name old time/op new time/op delta
RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8)
RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10)
RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9)
RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10)
```
And then runtime v2.39 compared to after this commit:
```
name old time/op new time/op delta
RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8)
RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8)
RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10)
RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9)
RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9)
```
In summary, the runtime doesn't really improve with this change for
queries with just a few steps. For queries with many steps, this
commit essentially reinstates the old performance. This is good
because the many-step queries are the one that matter most (longest
absolute runtime).
In terms of allocations, though, this commit doesn't make a dent at
all (numbers not shown). The reason is that most of the allocations
happen in the sampleRingIterator (in the storage package), which has
to be addressed in a separate commit.
Signed-off-by: beorn7 <beorn@grafana.com>
query_samples_total is a counter that tracks the total number of samples loaded by all queries.
The goal with this metric is to be able to see the amount of 'work' done by Prometheus to service queries.
At the moment we have metrics with the number of queries, plus more detailed metrics showing how much time each step of a query takes.
While those metrics do help they don't show us the whole picture.
Queries that do load more samples are (in general) more expensive than queries that do load fewer samples.
This means that looking only at the number of queries doesn't tell us how much 'work' Prometheus received.
Adding a counter that tracks the total number of samples loaded allows us to see if there was a spike in the cost of queries, not just the number of them.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
* Use zeropool.Pool to workaround SA6002
I built a tiny library called https://github.com/colega/zeropool to
workaround the SA6002 staticheck issue.
While searching for the references of that SA6002 staticheck issues on
Github first results was Prometheus itself, with quite a lot of ignores
of it.
This changes the usages of `sync.Pool` to `zeropool.Pool[T]` where a
pointer is not available.
Also added a benchmark for HeadAppender Append/Commit when series
already exist, which is one of the most usual cases IMO, as I didn't find
any.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Improve BenchmarkHeadAppender with more cases
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* A little copying is better than a little dependency
https://www.youtube.com/watch?v=PAAkCSZUG1c&t=9m28s
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Fix imports order
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Add license header
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Copyright should be on one of the first 3 lines
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Use require.Equal for testing
I don't depend on testify in my lib, but here we have it available.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Avoid flaky test
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Also use zeropool for pointsPool in engine.go
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
---------
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
It took a `Labels` where the memory could be re-used, but in practice
this hardly ever benefitted. Especially after converting `relabel.Process`
to `relabel.ProcessBuilder`.
Comparing the parameter to `nil` was a bug; `EmptyLabels` is not `nil`
so the slice was reallocated multiple times by `append`.
Lastly `Builder.Labels()` now estimates that the final size will depend
on labels added and deleted.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
In Thanos we would like to start experimenting with custom functions that are
currently not part of the PromQL spec. We would do this by adding an implementation
for those functions in the Thanos engine: https://github.com/thanos-community/promql-engine and allow
users to decide which engine they want to use on a per-query basis.
Since we use the PromQL parser from Prometheus, injecting functions in the global `Functions` variable
would mean they also become available for the Prometheus engine. To avoid this side-effect, this commit
exposes a Parser interface in which the supported functions can be injected as an option. If not functions
are injected, the parser implementation will default to the functions defined in the global Functions variable.
Signed-off-by: Filip Petkovski <filip.petkovsky@gmail.com>
TestConcurrentRangeQueries runs many queries, up to 4 at the same time,
to try to expose any race conditions.
This change stops four of them from running with a thousand or more steps:
`holt_winters(a_X[1d], 0.3, 0.3)`
`changes(a_X[1d])`
`rate(a_X[1d])`
`absent_over_time(a_X[1d])`
Particularly when the test runs with `-race` in CI, this reduces the
time and resources required.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
This is a bit more conservative than we could be. As long as a chunk
isn't the first in a block, we can be pretty sure that the previous
chunk won't disappear. However, the incremental gain of returning
NotCounterReset in these cases is probably very small and might not be
worth the code complications.
Wwith this, we now also pay attention to an explicitly set counter
reset during ingestion. While the case doesn't show up in practice
yet, there could be scenarios where the metric source knows there was
a counter reset even if it might not be visible from the values in the
histogram. It is also useful for testing.
Signed-off-by: beorn7 <beorn@grafana.com>
Extends Appender.AppendHistogram function to accept the FloatHistogram. TSDB supports appending, querying, WAL replay, for this new type of histogram.
Signed-off-by: Marc Tudurí <marctc@protonmail.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
We have a LabelBuilder in EvalNodeHelper; use it instead of creating a new one at every step.
Need to take some care that different uses of enh.lb do not overlap.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* promql: refactor BenchmarkRangeQuery so we can re-use test cases
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* promql: add test for race conditions in query engine
Note we skip large count_values queries -
`count_values` allocates a slice per unique value in the output, and
this test has unique values on every step of every series so it adds up
to a lot of slices. Add Go runtime overhead for checking `-race`, and
it chews up many gigabytes.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* TestConcurrentRangeQueries: wait before starting goroutine
Instead of starting 100 goroutines which just wait for the semaphore.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
We use `labels.Builder` to parse metrics, to avoid depending on the
internal implementation. This is not efficient, but the feature is only
used in tests. It wasn't efficient previously either - calling `Sort()`
after adding each label.
`createLabelsForAbsentFunction` also uses a Builder now, and gets
an extra `map` to replace the previous `Has()` usage.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Fix up promql to compile with changes to Labels
Re-use previous memory if it is already of the correct type.
In `NewListSeries` we hoist the conversion to an interface value out
so it only allocates once.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Patterned after `Chunk.Iterator()`: pass the old iterator in so it
can be re-used to avoid allocating a new object.
(This commit does not do any re-use; it is just changing all the method
signatures so re-use is possible in later commits.)
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Switch from 'sanity' to more inclusive lanuage
"Removing ableist language in code is important; it helps to create and
maintain an environment that welcomes all developers of all backgrounds,
while emphasizing that we as developers select the most articulate,
precise, descriptive language we can rather than relying on metaphors.
The phrase sanity check is ableist, and unnecessarily references mental
health in our code bases. It denotes that people with mental illnesses
are inferior, wrong, or incorrect, and the phrase sanity continues to be
used by employers and other individuals to discriminate against these
people."
From https://gist.github.com/seanmhanson/fe370c2d8bd2b3228680e38899baf5cc
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
The bucket receiving math.MaxFloat64 observations now has
math.MaxFloat64 as upper bound, while the bucket after it (the last
possible bucket) has +Inf.
This also adds a test for getBound and moves the getBound code to
generic.go (where it should have been in the first place).
Signed-off-by: beorn7 <beorn@grafana.com>
* histogram: Simplify iterators
We don't really need currLower and currUpper and can calculate it when
needed (as already done for the floatBucketIterator). The calculation
is cheap, while keeping those extra variables around costs RAM
(potentially a lot with many iterators).
* histogram: Convert Bucket/FloatBucket to one generic type
* histogram: Move some bucket iterator code into generic base iterator
* histogram: Remove cumulative iterator for FloatHistogram
We added it in the past for completeness (Histogram has one), but it
has never been used. Plus, even the cumulative iterator for Histogram
is only there for test reasons.
We can always add it back, and then maybe even using generics.
Signed-off-by: beorn7 <beorn@grafana.com>
If we are populating series for a subquery then set the interval
parameter accordingly so that downstream users could use that
information.
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@vinted.com>
Use new experimental package `golang.org/x/exp/slices`.
slices.Sort works on values that are directly comparable, like ints,
so avoids the overhad of an interface call to `.Less()`.
Left tests unchanged, because they don't need the speed and it may be
a cross-check that slices.Sort gives the same answer.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
And use the new method to call to compact Histograms during
parsing. This happens for both `Histogram` and `FloatHistogram`. In
this way, if targets decide to optimize the exposition size by merging
spans with empty buckets in between, we still get a normalized
results. It will also normalize away any valid but weird
representations like empty spans, spans with offset zero, and empty
buckets at the start or end of a span.
The implementation seemed easy at first as it just turns the
`compactBuckets` helper into a generic function (which now got its own
file). However, the integer Histograms have delta buckets instead of
absolute buckets, which had to be treated specially in the generic
`compactBuckets` function. To make sure it works, I have added plenty
of explicit tests for `Histogram` in addition to the `FloatHistogram`
tests.
I have also updated the doc comment for the `Compact` method.
Based on the insights now expressed in the doc comment, compacting
with a maxEmptyBuckets > 0 is rarely useful. Therefore, this commit
also sets the value to 0 in the two cases we were using 3 so far. We
might still want to reconsider, so I don't want to remove the
maxEmptyBuckets parameter right now.
Signed-off-by: beorn7 <beorn@grafana.com>
And a few cases of `EmptyLabels()`.
Replacing code which assumes the internal structure of `Labels`.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Update go to 1.19, set min version to 1.18
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
* Update golangci-lint
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
* model/relabel: Add benchmark
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* model/relabel: re-use Builder across relabels
Saves memory allocations.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* labels.Builder: allow re-use of result slice
This reduces memory allocations where the caller has a suitable slice available.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* model/relabel: re-use source values slice
To reduce memory allocations.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Unwind one change causing test failures
Restore original behaviour in PopulateLabels, where we must not overwrite the input set.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* relabel: simplify values optimisation
Use a stack-based array for up to 16 source labels, which will be the
vast majority of cases.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* lint
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Add histogram validation
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Correct negative offset validation
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Address review comments
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Validation benchmark
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Add more checks
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Attempt to fix tests
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Fix stuff
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Prettifier: Add spaces with non-callable keywords
I prefer to have a difference between, on one side: functions calls, end(), start(), and on the other side with, without, ignoring, by and group_rrigt, group_left.
The reasoning is that the former ones are not calls, while other are
functions. Additionally, it matches the examples in our documentation.
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
* Fix tests
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
We print the stacktrace of a panic when query causes one, but there's no
information about the query itself, which makes it harder to debug and
reproduce the issue.
This adds the 'expr' string to the logged panic.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
* Shortcut Matrix.ContainsSameLabelset()
It's quite often to execute this check on a Matrix that has zero or only
one series. There's no need to allocate a map for those cases.
There's also a one-liner for two-series case, so why not using it?
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Add license header
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Optimize Vector.ContainsSameLabelset
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Implement Pretty() function for AST nodes.
Signed-off-by: Harkishen-Singh <harkishensingh@hotmail.com>
This commit adds .Pretty() for all nodes of PromQL AST.
Each .Pretty() prettifies the node it belongs to, and under
no circustance, the parent or child node is touch/prettified.
Read more in the "Approach" part in `prettier.go`
* Refactor functions between printer.go & prettier.go
Signed-off-by: Harkishen-Singh <harkishensingh@hotmail.com>
This commit removes redundancy between printer.go and prettier.go
by taking out the common code into separate private functions.
* Add more unit tests for Prettier.
Signed-off-by: Harkishen-Singh <harkishensingh@hotmail.com>
* Add support for spliting function calls with 1 arg & unary expressions.
Signed-off-by: Harkishen-Singh <harkishensingh@hotmail.com>
This commit does 2 things:
1. It adds support to split function calls that have 1 arg and exceeds the max_characters_per_line
to multiple lines.
2. Splits Unary expressions that exceed the max_characters_per_line. This is done by formatting the child node
and then removing the prefix indent, which is already applied before the unary operator.
This follow a simple function-based approach to access the count and
sum fields of a native Histogram. It might be more elegant to
implement “accessors” via the dot operator, as considered in the
brainstorming doc [1]. However, that would require the introduction of
a whole new concept in PromQL. For the PoC, we should be fine with the
function-based approch. Even the obvious inefficiencies (rate'ing a
whole histogram twice when we only want to rate each the count and the
sum once) could be optimized behind the scenes.
Note that the function-based approach elegantly solves the problem of
detecting counter resets in the sum of observations in the case of
negative observations. (Since the whole native Histogram is rate'd,
the counter reset is detected for the Histogram as a whole.)
We will decide later if an “accessor” approach is really needed. It
would change the example expression for average duration in
functions.md from
histogram_sum(rate(http_request_duration_seconds[10m]))
/
histogram_count(rate(http_request_duration_seconds[10m]))
to
rate(http_request_duration_seconds.sum[10m])
/
rate(http_request_duration_seconds.count[10m])
[1]: https://docs.google.com/document/d/1ch6ru8GKg03N02jRjYriurt-CZqUVY09evPg6yKTA1s/edit
Signed-off-by: beorn7 <beorn@grafana.com>
Essentially, this mirrors the existing behavior for negative buckets:
If a histogram has only negative buckets, the upper bound of the zero
bucket is assumed to be zero.
Furthermore, it makes sure that the zero bucket boundaries are not
modified if a histogram that has no buckets at all but samples in the
zero bucket.
Also, add an TODO to vet if we really want this behavior.
Signed-off-by: beorn7 <beorn@grafana.com>
* Labels: create signature with/without labels
Instead of creating a new Labels slice then converting to signature,
go directly to the signature and save time.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Labels: refactor Builder tests
Have one test with a range of cases, and have them check the final
output rather than checking the internal structure of the Builder.
Also add a couple of cases where the value is "", which should be
interpreted as 'delete'.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Labels: add 'Keep' function to Builder
This lets us replace `Labels.WithLabels` with the more general `Builder`.
In `engine.resultMetric()` we can call `Keep()` instead of checking
and calling `Del()`.
Avoid calling `Sort()` in `Builder.Labels()` if we didn't add anything,
so that `Keep()` has the same performance as `WithLabels()`.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
While empty buckets can make sense in the internal representation (by
joining spans that would otherwise need more overhead for separate
representation), there are no spans in the JSON rendering. Therefore,
the JSON should not contain any empty buckets, since any buckets not
included in the output counts as empty anyway.
This changes both the inefficient MarshalJSON implementation as well
as the jsoniter implementation.
Signed-off-by: beorn7 <beorn@grafana.com>
* refactor: move from io/ioutil to io and os packages
* use fs.DirEntry instead of os.FileInfo after os.ReadDir
Signed-off-by: MOREL Matthieu <matthieu.morel@cnp.fr>
This now even enables jsoniter marshaling of Points in an instant
query (which previously used the traditional JSON marshaling).
Signed-off-by: beorn7 <beorn@grafana.com>
For conventional histograms, we need to gather all the individual
bucket timeseries at a data point to do the quantile calculation. The
code so far mirrored this behavior for the new native
histograms. However, since a single data point contains all the
buckets alreade, that's actually not needed. This PR simplifies the
code while still detecting a mix of conventional and native
histograms.
The weird signature calculation for the conventional histograms is
getting even weirder because of that. If this PR turns out to do the
right thing, I will implement a proper fix for the signature
calculation upstream.
Signed-off-by: beorn7 <beorn@grafana.com>
This commit ensures 64-bit integers are used in various tests that other wise
fail in 32-bit architectures.
It also adds support for int64 and uint64 types in the template.convertToFloat
function to support the test changes.
Closes: 10481
Signed-off-by: Martina Ferrari <tina@debian.org>
This exactly corresponds to the statistic compared against MaxSamples
during the course of query execution, so users can see how close their
queries are to a limit.
Co-authored-by: Harkishen Singh <harkishensingh@hotmail.com>
Co-authored-by: Andrew Bloomgarden <blmgrdn@amazon.com>
Signed-off-by: Andrew Bloomgarden <blmgrdn@amazon.com>
We always track total samples queried and add those to the standard set
of stats queries can report.
We also allow optionally tracking per-step samples queried. This must be
enabled both at the engine and query level to be tracked and rendered.
The engine flag is exposed via a Prometheus feature flag, while the
query flag is set when stats=all.
Co-authored-by: Alan Protasio <approtas@amazon.com>
Co-authored-by: Andrew Bloomgarden <blmgrdn@amazon.com>
Co-authored-by: Harkishen Singh <harkishensingh@hotmail.com>
Signed-off-by: Andrew Bloomgarden <blmgrdn@amazon.com>
* Run gofumpt on all files
Getting golangci-lint errors when building on my laptop, possibly because I have newer version of gofumpt then what it was formatted with.
Run gofumpt -w -extra on all files as it will be needed in the future anyway.
* Update golangci-lint to v1.44.2
v1.44.0 upgraded gofumpt so bumping version in CI will help keep formatting correct for everyone
* Address golangci-lint error
Getting 'error-strings: error strings should not be capitalized or end with punctuation or a newline' from revive here.
Drop new line.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
* Improve error logging for missing config and QL dir
Currently, when Prometheus can't open its config file or the query
logging dir under the data dir, it only logs what it has been given
default or commandline/config. Depending on the environment this can be
less than helpful, since the working directory may be unclear to the
user. I have specifically kept the existing error messages as intact as
possible to a) still log the parameter as given and b) cause as little
disruption for log-parsers/-analyzers as possible.
So in case of the config file or the data dir being non-absolute paths,
I use os.GetWd to find the working dir and assemble an absolute path for
error logging purposes. If GetWd fails, we just log "unknown", as
recovering from an error there would be very complex measure, likely not
worth the code/effort.
Example errors:
```
$ ./prometheus
ts=2022-02-06T16:00:53.034Z caller=main.go:445 level=error msg="Error loading config (--config.file=prometheus.yml)" fullpath=/home/klausman/src/prometheus/prometheus.yml err="open prometheus.yml: no such file or directory"
$ touch prometheus.yml
$ ./prometheus
[...]
ts=2022-02-06T16:01:00.992Z caller=query_logger.go:99 level=error component=activeQueryTracker msg="Error opening query log file" file=data/queries.active fullpath=/home/klausman/src/prometheus/data/queries.active err="open data/queries.active: permission denied"
panic: Unable to create mmap-ed active query log
[...]
$
```
Signed-off-by: Tobias Klausmann <klausman@schwarzvogel.de>
* Replace our own logic with just using filepath.Abs()
Signed-off-by: Tobias Klausmann <klausman@schwarzvogel.de>
* Further simplification
Signed-off-by: Tobias Klausmann <klausman@schwarzvogel.de>
* Review edits
Signed-off-by: Tobias Klausmann <klausman@schwarzvogel.de>
* Review edits
Signed-off-by: Tobias Klausmann <klausman@schwarzvogel.de>
* Review edits
Signed-off-by: Tobias Klausmann <klausman@schwarzvogel.de>
