In the past, every sample value was a float, so it was fine to call a
variable holding such a float "value" or "sample". With native
histograms, a sample might have a histogram value. And a histogram
value is still a value. Calling a float value just "value" or "sample"
or "V" is therefore misleading. Over the last few commits, I already
renamed many variables, but this cleans up a few more places where the
changes are more invasive.
Note that we do not to attempt naming in the JSON APIs or in the
protobufs. That would be quite a disruption. However, internally, we
can call variables as we want, and we should go with the option of
avoiding misunderstandings.
Signed-off-by: beorn7 <beorn@grafana.com>
In other words: Instead of having a “polymorphous” `Point` that can
either contain a float value or a histogram value, use an `FPoint` for
floats and an `HPoint` for histograms.
This seemingly small change has a _lot_ of repercussions throughout
the codebase.
The idea here is to avoid the increase in size of `Point` arrays that
happened after native histograms had been added.
The higher-level data structures (`Sample`, `Series`, etc.) are still
“polymorphous”. The same idea could be applied to them, but at each
step the trade-offs needed to be evaluated.
The idea with this change is to do the minimum necessary to get back
to pre-histogram performance for functions that do not touch
histograms. Here are comparisons for the `changes` function. The test
data doesn't include histograms yet. Ideally, there would be no change
in the benchmark result at all.
First runtime v2.39 compared to directly prior to this commit:
```
name old time/op new time/op delta
RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8)
RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10)
RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9)
RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10)
```
And then runtime v2.39 compared to after this commit:
```
name old time/op new time/op delta
RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8)
RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8)
RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10)
RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9)
RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9)
```
In summary, the runtime doesn't really improve with this change for
queries with just a few steps. For queries with many steps, this
commit essentially reinstates the old performance. This is good
because the many-step queries are the one that matter most (longest
absolute runtime).
In terms of allocations, though, this commit doesn't make a dent at
all (numbers not shown). The reason is that most of the allocations
happen in the sampleRingIterator (in the storage package), which has
to be addressed in a separate commit.
Signed-off-by: beorn7 <beorn@grafana.com>
query_samples_total is a counter that tracks the total number of samples loaded by all queries.
The goal with this metric is to be able to see the amount of 'work' done by Prometheus to service queries.
At the moment we have metrics with the number of queries, plus more detailed metrics showing how much time each step of a query takes.
While those metrics do help they don't show us the whole picture.
Queries that do load more samples are (in general) more expensive than queries that do load fewer samples.
This means that looking only at the number of queries doesn't tell us how much 'work' Prometheus received.
Adding a counter that tracks the total number of samples loaded allows us to see if there was a spike in the cost of queries, not just the number of them.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
* Use zeropool.Pool to workaround SA6002
I built a tiny library called https://github.com/colega/zeropool to
workaround the SA6002 staticheck issue.
While searching for the references of that SA6002 staticheck issues on
Github first results was Prometheus itself, with quite a lot of ignores
of it.
This changes the usages of `sync.Pool` to `zeropool.Pool[T]` where a
pointer is not available.
Also added a benchmark for HeadAppender Append/Commit when series
already exist, which is one of the most usual cases IMO, as I didn't find
any.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Improve BenchmarkHeadAppender with more cases
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* A little copying is better than a little dependency
https://www.youtube.com/watch?v=PAAkCSZUG1c&t=9m28s
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Fix imports order
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Add license header
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Copyright should be on one of the first 3 lines
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Use require.Equal for testing
I don't depend on testify in my lib, but here we have it available.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Avoid flaky test
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Also use zeropool for pointsPool in engine.go
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
---------
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
It took a `Labels` where the memory could be re-used, but in practice
this hardly ever benefitted. Especially after converting `relabel.Process`
to `relabel.ProcessBuilder`.
Comparing the parameter to `nil` was a bug; `EmptyLabels` is not `nil`
so the slice was reallocated multiple times by `append`.
Lastly `Builder.Labels()` now estimates that the final size will depend
on labels added and deleted.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
In Thanos we would like to start experimenting with custom functions that are
currently not part of the PromQL spec. We would do this by adding an implementation
for those functions in the Thanos engine: https://github.com/thanos-community/promql-engine and allow
users to decide which engine they want to use on a per-query basis.
Since we use the PromQL parser from Prometheus, injecting functions in the global `Functions` variable
would mean they also become available for the Prometheus engine. To avoid this side-effect, this commit
exposes a Parser interface in which the supported functions can be injected as an option. If not functions
are injected, the parser implementation will default to the functions defined in the global Functions variable.
Signed-off-by: Filip Petkovski <filip.petkovsky@gmail.com>
TestConcurrentRangeQueries runs many queries, up to 4 at the same time,
to try to expose any race conditions.
This change stops four of them from running with a thousand or more steps:
`holt_winters(a_X[1d], 0.3, 0.3)`
`changes(a_X[1d])`
`rate(a_X[1d])`
`absent_over_time(a_X[1d])`
Particularly when the test runs with `-race` in CI, this reduces the
time and resources required.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
This is a bit more conservative than we could be. As long as a chunk
isn't the first in a block, we can be pretty sure that the previous
chunk won't disappear. However, the incremental gain of returning
NotCounterReset in these cases is probably very small and might not be
worth the code complications.
Wwith this, we now also pay attention to an explicitly set counter
reset during ingestion. While the case doesn't show up in practice
yet, there could be scenarios where the metric source knows there was
a counter reset even if it might not be visible from the values in the
histogram. It is also useful for testing.
Signed-off-by: beorn7 <beorn@grafana.com>
Extends Appender.AppendHistogram function to accept the FloatHistogram. TSDB supports appending, querying, WAL replay, for this new type of histogram.
Signed-off-by: Marc Tudurí <marctc@protonmail.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
We have a LabelBuilder in EvalNodeHelper; use it instead of creating a new one at every step.
Need to take some care that different uses of enh.lb do not overlap.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* promql: refactor BenchmarkRangeQuery so we can re-use test cases
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* promql: add test for race conditions in query engine
Note we skip large count_values queries -
`count_values` allocates a slice per unique value in the output, and
this test has unique values on every step of every series so it adds up
to a lot of slices. Add Go runtime overhead for checking `-race`, and
it chews up many gigabytes.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* TestConcurrentRangeQueries: wait before starting goroutine
Instead of starting 100 goroutines which just wait for the semaphore.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
We use `labels.Builder` to parse metrics, to avoid depending on the
internal implementation. This is not efficient, but the feature is only
used in tests. It wasn't efficient previously either - calling `Sort()`
after adding each label.
`createLabelsForAbsentFunction` also uses a Builder now, and gets
an extra `map` to replace the previous `Has()` usage.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Fix up promql to compile with changes to Labels
Re-use previous memory if it is already of the correct type.
In `NewListSeries` we hoist the conversion to an interface value out
so it only allocates once.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Patterned after `Chunk.Iterator()`: pass the old iterator in so it
can be re-used to avoid allocating a new object.
(This commit does not do any re-use; it is just changing all the method
signatures so re-use is possible in later commits.)
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Switch from 'sanity' to more inclusive lanuage
"Removing ableist language in code is important; it helps to create and
maintain an environment that welcomes all developers of all backgrounds,
while emphasizing that we as developers select the most articulate,
precise, descriptive language we can rather than relying on metaphors.
The phrase sanity check is ableist, and unnecessarily references mental
health in our code bases. It denotes that people with mental illnesses
are inferior, wrong, or incorrect, and the phrase sanity continues to be
used by employers and other individuals to discriminate against these
people."
From https://gist.github.com/seanmhanson/fe370c2d8bd2b3228680e38899baf5cc
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
The bucket receiving math.MaxFloat64 observations now has
math.MaxFloat64 as upper bound, while the bucket after it (the last
possible bucket) has +Inf.
This also adds a test for getBound and moves the getBound code to
generic.go (where it should have been in the first place).
Signed-off-by: beorn7 <beorn@grafana.com>
* histogram: Simplify iterators
We don't really need currLower and currUpper and can calculate it when
needed (as already done for the floatBucketIterator). The calculation
is cheap, while keeping those extra variables around costs RAM
(potentially a lot with many iterators).
* histogram: Convert Bucket/FloatBucket to one generic type
* histogram: Move some bucket iterator code into generic base iterator
* histogram: Remove cumulative iterator for FloatHistogram
We added it in the past for completeness (Histogram has one), but it
has never been used. Plus, even the cumulative iterator for Histogram
is only there for test reasons.
We can always add it back, and then maybe even using generics.
Signed-off-by: beorn7 <beorn@grafana.com>
If we are populating series for a subquery then set the interval
parameter accordingly so that downstream users could use that
information.
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@vinted.com>
Use new experimental package `golang.org/x/exp/slices`.
slices.Sort works on values that are directly comparable, like ints,
so avoids the overhad of an interface call to `.Less()`.
Left tests unchanged, because they don't need the speed and it may be
a cross-check that slices.Sort gives the same answer.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
And use the new method to call to compact Histograms during
parsing. This happens for both `Histogram` and `FloatHistogram`. In
this way, if targets decide to optimize the exposition size by merging
spans with empty buckets in between, we still get a normalized
results. It will also normalize away any valid but weird
representations like empty spans, spans with offset zero, and empty
buckets at the start or end of a span.
The implementation seemed easy at first as it just turns the
`compactBuckets` helper into a generic function (which now got its own
file). However, the integer Histograms have delta buckets instead of
absolute buckets, which had to be treated specially in the generic
`compactBuckets` function. To make sure it works, I have added plenty
of explicit tests for `Histogram` in addition to the `FloatHistogram`
tests.
I have also updated the doc comment for the `Compact` method.
Based on the insights now expressed in the doc comment, compacting
with a maxEmptyBuckets > 0 is rarely useful. Therefore, this commit
also sets the value to 0 in the two cases we were using 3 so far. We
might still want to reconsider, so I don't want to remove the
maxEmptyBuckets parameter right now.
Signed-off-by: beorn7 <beorn@grafana.com>
And a few cases of `EmptyLabels()`.
Replacing code which assumes the internal structure of `Labels`.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Update go to 1.19, set min version to 1.18
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
* Update golangci-lint
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
* model/relabel: Add benchmark
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* model/relabel: re-use Builder across relabels
Saves memory allocations.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* labels.Builder: allow re-use of result slice
This reduces memory allocations where the caller has a suitable slice available.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* model/relabel: re-use source values slice
To reduce memory allocations.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Unwind one change causing test failures
Restore original behaviour in PopulateLabels, where we must not overwrite the input set.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* relabel: simplify values optimisation
Use a stack-based array for up to 16 source labels, which will be the
vast majority of cases.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* lint
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Add histogram validation
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Correct negative offset validation
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Address review comments
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Validation benchmark
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Add more checks
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Attempt to fix tests
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Fix stuff
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Prettifier: Add spaces with non-callable keywords
I prefer to have a difference between, on one side: functions calls, end(), start(), and on the other side with, without, ignoring, by and group_rrigt, group_left.
The reasoning is that the former ones are not calls, while other are
functions. Additionally, it matches the examples in our documentation.
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
* Fix tests
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
We print the stacktrace of a panic when query causes one, but there's no
information about the query itself, which makes it harder to debug and
reproduce the issue.
This adds the 'expr' string to the logged panic.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
* Shortcut Matrix.ContainsSameLabelset()
It's quite often to execute this check on a Matrix that has zero or only
one series. There's no need to allocate a map for those cases.
There's also a one-liner for two-series case, so why not using it?
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Add license header
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Optimize Vector.ContainsSameLabelset
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Implement Pretty() function for AST nodes.
Signed-off-by: Harkishen-Singh <harkishensingh@hotmail.com>
This commit adds .Pretty() for all nodes of PromQL AST.
Each .Pretty() prettifies the node it belongs to, and under
no circustance, the parent or child node is touch/prettified.
Read more in the "Approach" part in `prettier.go`
* Refactor functions between printer.go & prettier.go
Signed-off-by: Harkishen-Singh <harkishensingh@hotmail.com>
This commit removes redundancy between printer.go and prettier.go
by taking out the common code into separate private functions.
* Add more unit tests for Prettier.
Signed-off-by: Harkishen-Singh <harkishensingh@hotmail.com>
* Add support for spliting function calls with 1 arg & unary expressions.
Signed-off-by: Harkishen-Singh <harkishensingh@hotmail.com>
This commit does 2 things:
1. It adds support to split function calls that have 1 arg and exceeds the max_characters_per_line
to multiple lines.
2. Splits Unary expressions that exceed the max_characters_per_line. This is done by formatting the child node
and then removing the prefix indent, which is already applied before the unary operator.
This follow a simple function-based approach to access the count and
sum fields of a native Histogram. It might be more elegant to
implement “accessors” via the dot operator, as considered in the
brainstorming doc [1]. However, that would require the introduction of
a whole new concept in PromQL. For the PoC, we should be fine with the
function-based approch. Even the obvious inefficiencies (rate'ing a
whole histogram twice when we only want to rate each the count and the
sum once) could be optimized behind the scenes.
Note that the function-based approach elegantly solves the problem of
detecting counter resets in the sum of observations in the case of
negative observations. (Since the whole native Histogram is rate'd,
the counter reset is detected for the Histogram as a whole.)
We will decide later if an “accessor” approach is really needed. It
would change the example expression for average duration in
functions.md from
histogram_sum(rate(http_request_duration_seconds[10m]))
/
histogram_count(rate(http_request_duration_seconds[10m]))
to
rate(http_request_duration_seconds.sum[10m])
/
rate(http_request_duration_seconds.count[10m])
[1]: https://docs.google.com/document/d/1ch6ru8GKg03N02jRjYriurt-CZqUVY09evPg6yKTA1s/edit
Signed-off-by: beorn7 <beorn@grafana.com>
Essentially, this mirrors the existing behavior for negative buckets:
If a histogram has only negative buckets, the upper bound of the zero
bucket is assumed to be zero.
Furthermore, it makes sure that the zero bucket boundaries are not
modified if a histogram that has no buckets at all but samples in the
zero bucket.
Also, add an TODO to vet if we really want this behavior.
Signed-off-by: beorn7 <beorn@grafana.com>
* Labels: create signature with/without labels
Instead of creating a new Labels slice then converting to signature,
go directly to the signature and save time.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Labels: refactor Builder tests
Have one test with a range of cases, and have them check the final
output rather than checking the internal structure of the Builder.
Also add a couple of cases where the value is "", which should be
interpreted as 'delete'.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Labels: add 'Keep' function to Builder
This lets us replace `Labels.WithLabels` with the more general `Builder`.
In `engine.resultMetric()` we can call `Keep()` instead of checking
and calling `Del()`.
Avoid calling `Sort()` in `Builder.Labels()` if we didn't add anything,
so that `Keep()` has the same performance as `WithLabels()`.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
While empty buckets can make sense in the internal representation (by
joining spans that would otherwise need more overhead for separate
representation), there are no spans in the JSON rendering. Therefore,
the JSON should not contain any empty buckets, since any buckets not
included in the output counts as empty anyway.
This changes both the inefficient MarshalJSON implementation as well
as the jsoniter implementation.
Signed-off-by: beorn7 <beorn@grafana.com>
* refactor: move from io/ioutil to io and os packages
* use fs.DirEntry instead of os.FileInfo after os.ReadDir
Signed-off-by: MOREL Matthieu <matthieu.morel@cnp.fr>
This now even enables jsoniter marshaling of Points in an instant
query (which previously used the traditional JSON marshaling).
Signed-off-by: beorn7 <beorn@grafana.com>
For conventional histograms, we need to gather all the individual
bucket timeseries at a data point to do the quantile calculation. The
code so far mirrored this behavior for the new native
histograms. However, since a single data point contains all the
buckets alreade, that's actually not needed. This PR simplifies the
code while still detecting a mix of conventional and native
histograms.
The weird signature calculation for the conventional histograms is
getting even weirder because of that. If this PR turns out to do the
right thing, I will implement a proper fix for the signature
calculation upstream.
Signed-off-by: beorn7 <beorn@grafana.com>
This commit ensures 64-bit integers are used in various tests that other wise
fail in 32-bit architectures.
It also adds support for int64 and uint64 types in the template.convertToFloat
function to support the test changes.
Closes: 10481
Signed-off-by: Martina Ferrari <tina@debian.org>
This exactly corresponds to the statistic compared against MaxSamples
during the course of query execution, so users can see how close their
queries are to a limit.
Co-authored-by: Harkishen Singh <harkishensingh@hotmail.com>
Co-authored-by: Andrew Bloomgarden <blmgrdn@amazon.com>
Signed-off-by: Andrew Bloomgarden <blmgrdn@amazon.com>
We always track total samples queried and add those to the standard set
of stats queries can report.
We also allow optionally tracking per-step samples queried. This must be
enabled both at the engine and query level to be tracked and rendered.
The engine flag is exposed via a Prometheus feature flag, while the
query flag is set when stats=all.
Co-authored-by: Alan Protasio <approtas@amazon.com>
Co-authored-by: Andrew Bloomgarden <blmgrdn@amazon.com>
Co-authored-by: Harkishen Singh <harkishensingh@hotmail.com>
Signed-off-by: Andrew Bloomgarden <blmgrdn@amazon.com>
* Run gofumpt on all files
Getting golangci-lint errors when building on my laptop, possibly because I have newer version of gofumpt then what it was formatted with.
Run gofumpt -w -extra on all files as it will be needed in the future anyway.
* Update golangci-lint to v1.44.2
v1.44.0 upgraded gofumpt so bumping version in CI will help keep formatting correct for everyone
* Address golangci-lint error
Getting 'error-strings: error strings should not be capitalized or end with punctuation or a newline' from revive here.
Drop new line.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
* Improve error logging for missing config and QL dir
Currently, when Prometheus can't open its config file or the query
logging dir under the data dir, it only logs what it has been given
default or commandline/config. Depending on the environment this can be
less than helpful, since the working directory may be unclear to the
user. I have specifically kept the existing error messages as intact as
possible to a) still log the parameter as given and b) cause as little
disruption for log-parsers/-analyzers as possible.
So in case of the config file or the data dir being non-absolute paths,
I use os.GetWd to find the working dir and assemble an absolute path for
error logging purposes. If GetWd fails, we just log "unknown", as
recovering from an error there would be very complex measure, likely not
worth the code/effort.
Example errors:
```
$ ./prometheus
ts=2022-02-06T16:00:53.034Z caller=main.go:445 level=error msg="Error loading config (--config.file=prometheus.yml)" fullpath=/home/klausman/src/prometheus/prometheus.yml err="open prometheus.yml: no such file or directory"
$ touch prometheus.yml
$ ./prometheus
[...]
ts=2022-02-06T16:01:00.992Z caller=query_logger.go:99 level=error component=activeQueryTracker msg="Error opening query log file" file=data/queries.active fullpath=/home/klausman/src/prometheus/data/queries.active err="open data/queries.active: permission denied"
panic: Unable to create mmap-ed active query log
[...]
$
```
Signed-off-by: Tobias Klausmann <klausman@schwarzvogel.de>
* Replace our own logic with just using filepath.Abs()
Signed-off-by: Tobias Klausmann <klausman@schwarzvogel.de>
* Further simplification
Signed-off-by: Tobias Klausmann <klausman@schwarzvogel.de>
* Review edits
Signed-off-by: Tobias Klausmann <klausman@schwarzvogel.de>
* Review edits
Signed-off-by: Tobias Klausmann <klausman@schwarzvogel.de>
* Review edits
Signed-off-by: Tobias Klausmann <klausman@schwarzvogel.de>
This follows the line of argument that the invariant of not looking
ahead of the query time was merely emerging behavior and not a
documented stable feature. Any query that looks ahead of the query
time was simply invalid before the introduction of the negative offset
and the @ modifier.
Signed-off-by: beorn7 <beorn@grafana.com>
- Simplify the code a bit.
- Cover more corner cases.
- Remove TODO for negative buckets. (I think they are handled. Tests
will reveal if not.)
Signed-off-by: beorn7 <beorn@grafana.com>
This can happen if the aggregation starts with a float and later
encounters a histogram. In that case, the newly encountered histogram
would have been added to a nil histogram.
This should be tested, of course, but that's best done within the
PromQL testing framework, which we still need to enable for histograms
(for which we have a TODO in the code and now also a card in the GH
project).
Signed-off-by: beorn7 <beorn@grafana.com>
* MergeFloatBucketIterator for []FloatBucketIterator
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* histogram_quantile for histograms
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix histogram_quantile
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Unit test and enhancements
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Iterators to iterate buckets in reverse and all buckets together including zero bucket
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Consider all buckets for histogram_quantile and fix the implementation
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Remove unneeded code
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix lint
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
`BufferedSeriesIterator` and `MemoizedSeriesIterator` use a method
called `Values` for exactly the purpose for which all other iterators
of the same kind use a method called `At`. That alone is confusing,
but on top of that, the `Values` method only returns a single sample,
not multiple values. I assume the naming has historical reasons. This
commit makes it more consistent. It is now easier to read, and now
`BufferedSeriesIterator` and `MemoizedSeriesIterator` implement
`chunkenc.Iterator` like many other iterators, too.
Signed-off-by: beorn7 <beorn@grafana.com>
- Pick At... method via return value of Next/Seek.
- Do not clobber returned buckets.
- Add partial FloatHistogram suppert.
Note that the promql package is now _only_ dealing with
FloatHistograms, following the idea that PromQL only knows float
values.
As a byproduct, I have removed the histogramSeries metric. In my
understanding, series can have both float and histogram samples, so
that metric doesn't make sense anymore.
As another byproduct, I have converged the sampleBuf and the
histogramSampleBuf in memSeries into one. The sample type stored in
the sampleBuf has been extended to also contain histograms even before
this commit.
Signed-off-by: beorn7 <beorn@grafana.com>
JSON marshaling is only needed for the HTTP API. Since Point is such a
frequently marshaled type, it gets an optimized treatment directly in
web/api/v1/api.go. The MarshalJSON method still provided in the promql
package is therefore unused and its existence is confusing.
Signed-off-by: beorn7 <beorn@grafana.com>
This is to avoid copying the many fields of a histogram.Histogram all
the time.
This also fixes a bunch of formerly broken tests.
Signed-off-by: beorn7 <beorn@grafana.com>
* Add test case to showcase the problem in #9590
Signed-off-by: Thomas Jackson <jacksontj.89@gmail.com>
* Don't unwrap ParenExpr in newStepInvariantExpr
Fixes#9590
Signed-off-by: Thomas Jackson <jacksontj.89@gmail.com>
This creates a new `model` directory and moves all data-model related
packages over there:
exemplar labels relabel rulefmt textparse timestamp value
All the others are more or less utilities and have been moved to `util`:
gate logging modetimevfs pool runtime
Signed-off-by: beorn7 <beorn@grafana.com>
* TSDB: demistify seriesRefs and ChunkRefs
The TSDB package contains many types of series and chunk references,
all shrouded in uint types. Often the same uint value may
actually mean one of different types, in non-obvious ways.
This PR aims to clarify the code and help navigating to relevant docs,
usage, etc much quicker.
Concretely:
* Use appropriately named types and document their semantics and
relations.
* Make multiplexing and demuxing of types explicit
(on the boundaries between concrete implementations and generic
interfaces).
* Casting between different types should be free. None of the changes
should have any impact on how the code runs.
TODO: Implement BlockSeriesRef where appropriate (for a future PR)
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* feedback
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* agent: demistify seriesRefs and ChunkRefs
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* promql: copy data when short-circuiting
Because the range query loop re-uses the output buffer each time round,
we must copy results into the buffer rather than using input as output.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
A lot of this code was hacked together, literally during a
hackathon. This commit intends not to change the code substantially,
but just make the code obey the usual style practices.
A (possibly incomplete) list of areas:
* Generally address linter warnings.
* The `pgk` directory is deprecated as per dev-summit. No new packages should
be added to it. I moved the new `pkg/histogram` package to `model`
anticipating what's proposed in #9478.
* Make the naming of the Sparse Histogram more consistent. Including
abbreviations, there were just too many names for it: SparseHistogram,
Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in
general. Only add "Sparse" if it is needed to avoid confusion with
conventional Histograms (which is rare because the TSDB really has no notion
of conventional Histograms). Use abbreviations only in local scope, and then
really abbreviate (not just removing three out of seven letters like in
"Histo"). This is in the spirit of
https://github.com/golang/go/wiki/CodeReviewComments#variable-names
* Several other minor name changes.
* A lot of formatting of doc comments. For one, following
https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences
, but also layout question, anticipating how things will look like
when rendered by `godoc` (even where `godoc` doesn't render them
right now because they are for unexported types or not a doc comment
at all but just a normal code comment - consistency is queen!).
* Re-enabled `TestQueryLog` and `TestEndopints` (they pass now,
leaving them disabled was presumably an oversight).
* Bucket iterator for histogram.Histogram is now created with a
method.
* HistogramChunk.iterator now allows iterator recycling. (I think
@dieterbe only commented it out because he was confused by the
question in the comment.)
* HistogramAppender.Append panics now because we decided to treat
staleness marker differently.
Signed-off-by: beorn7 <beorn@grafana.com>
* Add benchmark case for many-to-one join
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* query_range: compute join signatures just once
For an expression like `a + on(p,q) b`, extract the `p,q` part from each
series once, instead of re-computing at every step of the range.
Although there was a cache, computing the key by concatenating all
labels was expensive.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Add benchmark for query_range with topk
Modify sample data so values within a metric differ
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Optimise topk where k==1
In this case we don't need a heap to keep track of values; just a single
slot is fine.
Simplify the initialization of the heap: since all cases start off as a
single-item heap we can just assign the value directly.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Allow at least one slot in results for topk, quantile
k isn't set for quantile, but we need space to start collecting values
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Allow VectorSelector.String() without matchers
Previously this method was panicking because it was trying to allocate a
slice with capacity -1. There's nothing saying that VectorSelector
should have matchers, and it's actually prepared to have zero matcher
strings, so it's worth checking instead of panicking.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* PromQL: Fix start and end keywords masking label and metric names
This commit fixes an issue with the "at modifier" that introduced two
new keywords: `start` and `end`. In grouping options and in metric
names, these keywords took precedence over metric or label names, so
that those metrics and labels could no longer be referenced.
Signed-off-by: Clayton Peters <clayton.peters@man.com>
* Add in additional tests for metrics and/or labels called start/end.
Signed-off-by: Clayton Peters <clayton.peters@man.com>
* *: Cut 2.29.0-rc.0
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* VERSION: bump to 2.29.0-rc.0
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* Remove experimental wording on size-based retention
Followup of #9004
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Fix PR reference in changelog
Signed-off-by: George Brighton <george@gebn.co.uk>
* Describe EC2 availability zone IDs at most once per refresh (#9142)
Signed-off-by: George Brighton <george@gebn.co.uk>
* Describe EC2 availability zones at most once per SD load
Closes#9142.
Signed-off-by: George Brighton <george@gebn.co.uk>
* Incorporate feedback
Signed-off-by: George Brighton <george@gebn.co.uk>
* Integrate feedback
Signed-off-by: George Brighton <george@gebn.co.uk>
* Add a compatibility note for macOS users.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* *: Cut v2.29.0-rc.1
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* Fix `kuma_sd` targetgroup reporting (#9157)
* Bundle all xDS targets into a single group
Signed-off-by: austin ce <austin.cawley@gmail.com>
* *: cut v2.29.0-rc.2
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* Rename links
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* bump codemirror-promql to 0.17.0
Signed-off-by: Augustin Husson <husson.augustin@gmail.com>
* *: cut v2.29.0
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* tsdb: align atomically accessed int64 (#9192)
This prevents a panic in 32-bit archs:
https://pkg.go.dev/sync/atomic#pkg-note-BUGFixed#9190
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Release 2.29.1 (#9193)
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
Co-authored-by: Clayton Peters <clayton.peters@man.com>
Co-authored-by: Frederic Branczyk <fbranczyk@gmail.com>
Co-authored-by: George Brighton <george@gebn.co.uk>
Co-authored-by: Austin Cawley-Edwards <austin.cawley@gmail.com>
Co-authored-by: Levi Harrison <git@leviharrison.dev>
Co-authored-by: Augustin Husson <husson.augustin@gmail.com>
* Push the matchers for LabelNames all the way into the index.
NB This doesn't actually implement it in the index, just plumbs it through for now...
Signed-off-by: Tom Wilkie <tom@grafana.com>
* Hack it up. Does not work.
Signed-off-by: Tom Wilkie <tom@grafana.com>
* Revert changes I don't understand
Can't see why do we need to hold a mutex on symbols, and the purpose of
the LabelNamesFor method.
Maybe I'll need to re-add this later.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Implement LabelNamesFor
This method provides the label names that appear in the postings
provided. We do that deeper than the label values because we know
beforehand that most of the label names we'll be the same across
different postings, and we don't want to go down an up looking up the
same symbols for all different series.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Mutex on symbols should be unlocked
However, I still don't understand why do we need a mutex here.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Fix head.LabelNamesFor
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Implement mockIndex LabelNames with matchers
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Nitpick on slice initialisation
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Add tests for LabelNamesWithMatchers
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Fix the mutex mess on head.LabelValues/LabelNames
I still don't see why we need to grab that unrelated mutex, but at least
now we're grabbing it consistently
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Check error after iterating postings
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Use the error from posting when there was en error in postings
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Update storage/interface.go comment
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Update tsdb/index/index.go comment
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Update tsdb/index/index.go wrapped error msg
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Update tsdb/index/index.go wrapped error msg
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Update tsdb/index/index.go warpped error msg
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Remove unneeded comment
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Add testcases for LabelNames w/matchers in api.go
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Use t.Cleanup() instead of defer in tests
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Tom Wilkie <tom@grafana.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Added feature flag support to unit tests
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added/fixed tests
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Addressed review comments
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Append sparse histograms into the Head block
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Add AtHistogram() to Iterator interface. Make HistoChunk conform to Chunk interface.
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Write exemplars to the WAL and send them over remote write.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Update example for exemplars, print data in a more obvious format.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Add metrics for remote write of exemplars.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Fix incorrect slices passed to send in remote write.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* We need to unregister the new metrics.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address review comments
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Order of exemplar append vs write exemplar to WAL needs to change.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Condense sample/exemplar delivery tests to parameterized sub-tests
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Rename test methods for clarity now that they also handle exemplars
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Rename counter variable. Fix instances where metrics were not updated correctly
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Add exemplars to LoadWAL benchmark
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* last exemplars timestamp metric needs to convert value to seconds with
ms precision
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Process exemplar records in a separate go routine when loading the WAL.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address review comments related to clarifying comments and variable
names. Also refactor sample/exemplar to enqueue prompb types.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Regenerate types proto with comments, update protoc version again.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Put remote write of exemplars behind a feature flag.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address some of Ganesh's review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Move exemplar remote write feature flag to a config file field.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address Bartek's review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Don't allocate exemplar buffers in queue_manager if we're not going to
send exemplars over remote write.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Add ValidateExemplar function, validate exemplars when appending to head
and log them all to WAL before adding them to exemplar storage.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address more reivew comments from Ganesh.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Add exemplar total label length check.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address a few last review comments
Signed-off-by: Callum Styan <callumstyan@gmail.com>
Co-authored-by: Martin Disibio <mdisibio@gmail.com>
* Add range query test cases
This includes a couple of failing ones that double count some points due
to the iterator seek bug.
Co-authored-by: Oleg Zaytsev <mail@olegzaytsev.com>
Signed-off-by: Fiona Liao <fiona.y.liao@gmail.com>
* Add Seek() implementation for memSafeIterator
Previously, calling memSafeIterator.Seek() would call the Seek() method
on its embedded iterator. This was causing the embedded iterator and the
memSafeIterator to get out of sync because when the embedded Seek()
moved to the next element of the embedded iterator, memSafeIterator
didn't "know" about it. memSafeIterator has to "know" when the embedded
iterator has moved to be able to work out when it should be reading from
its buffer rather than the embedded iterator.
Used same logic as for xorIterator.Seek() (which in runtime is used as
the embedded iterator) - return false if the iterator has an error and
try to move to next element if the required time hasn't been reached, or
if no elements have been read yet. The memSafeIterator.Next() method is
being called so memSafeIterator.i is always accurate.
Signed-off-by: Fiona Liao <fiona.y.liao@gmail.com>
* Add tsdb package test
Signed-off-by: Fiona Liao <fiona.y.liao@gmail.com>
Co-authored-by: Oleg Zaytsev <mail@olegzaytsev.com>
This moves the label lookup into TSDB, whilst still keeping the cached-ref optimisation for repeated Appends.
This makes the API easier to consume and implement. In particular this change is motivated by the scrape-time-aggregation work, which I don't think is possible to implement without it as it needs access to label values.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
In the previous version, 1.18.0, the "megacheck" linter paid attention
to the '//lint:ignore' comment, but that is no longer there.
Newer version pay attention to '//nolint:<linter>,<linter>,...'
comments, optionally followed by a "second" comment introduced by '//'.
Update the directives to use this style.
This is related to prometheus/blackbox_exporter#738 and
prometheus/blackbox_exporter#745.
Signed-off-by: Marcelo E. Magallon <marcelo.magallon@grafana.com>
This commit adds `@ <timestamp>` modifier as per this design doc: https://docs.google.com/document/d/1uSbD3T2beM-iX4-Hp7V074bzBRiRNlqUdcWP6JTDQSs/edit.
An example query:
```
rate(process_cpu_seconds_total[1m])
and
topk(7, rate(process_cpu_seconds_total[1h] @ 1234))
```
which ranks based on last 1h rate and w.r.t. unix timestamp 1234 but actually plots the 1m rate.
Signed-off-by: Ganesh Vernekar <cs15btech11018@iith.ac.in>
For a sufficiently complex expression, having to render
thousands of nodes for every subquery type error can take
a while - so don't do that.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* Testify: move to require
Moving testify to require to fail tests early in case of errors.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* More moves
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Refactor test assertions
This pull request gets rid of assert.True where possible to use
fine-grained assertions.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Separate tests into:
** Aggregators
** Functions
** Operators
** Selectors
* Remove simple files and place tests into other files.
* Eliminate some of the _over_time tests since there are already plenty of
edge cases present in the functions.test file.
Relates to #740
Signed-off-by: Harold Dost <harolddost@gmail.com>
* tsdb: Added ChunkQueryable implementations to db; unified compactor, querier and fanout block iterating.
Chained to https://github.com/prometheus/prometheus/pull/7059
* NewMerge(Chunk)Querier now takies multiple primaries allowing tsdb DB code to use it.
* Added single SeriesEntry / ChunkEntry for all series implementations.
* Unified all vertical, and non vertical for compact and querying to single
merge series / chunk sets by reusing VerticalSeriesMergeFunc for overlapping algorithm (same logic as before)
* Added block (Base/Chunk/)Querier for block querying. We then use populateAndTomb(Base/Chunk/) to iterate over chunks or samples.
* Refactored endpoint tests and querier tests to include subtests.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Addressed comments from Brian and Beorn.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed snapshot test and added chunk iterator support for DBReadOnly.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed race when iterating over Ats first.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed tests.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed populate block tests.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed endpoints test.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed test.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Added test & fixed case of head open chunk.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed DBReadOnly tests and bug producing 1 sample chunks.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Added cases for partial block overlap for multiple full chunks.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Added extra tests for chunk meta after compaction.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed small vertical merge bug and added more tests for that.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Implement go leak test for promql
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Implement go leak test for Consul SD
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Implement go leak test in discovery manager
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* promql: Removed global and add ability to have better interval for subqueries if not specified
## Changes
* Refactored tests for better hints testing
* Added various TODO in places to enhance.
* Moved DefaultEvalInterval global to opts with func(rangeMillis int64) int64 function instead
Motivation: At Thanos we would love to have better control over the subqueries step/interval.
This is important to choose proper resolution. I think having proper step also does not harm for
Prometheus and remote read users. Especially on stateless querier we do not know evaluation interval
and in fact putting global can be wrong to assume for Prometheus even.
I think ideally we could try to have at least 3 samples within the range, the same
way Prometheus UI and Grafana assumes.
Anyway this interfaces allows to decide on promQL user basis.
Open question: Is taking parent interval a smart move?
Motivation for removing global: I spent 1h fighting with:
=== RUN TestEvaluations
TestEvaluations: promql_test.go:31: unexpected error: error evaluating query "absent_over_time(rate(nonexistant[5m])[5m:])" (line 687): unexpected error: runtime error: integer divide by zero
--- FAIL: TestEvaluations (0.32s)
FAIL
At the end I found that this fails on most of the versions including this master if you run this test alone. If run together with many
other tests it passes. This is due to SetDefaultEvaluationInterval(1 * time.Minute)
in test that is ran before TestEvaluations. Thanks to globals (:
Let's fix it by dropping this global.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Added issue links for TODOs.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Removed irrelevant changes.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Add errors and Warnings to SeriesSet
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Change Querier interface and refactor accordingly
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Refactor promql/engine to propagate warnings at eval stage
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Address review issues
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Make sure all the series from all Selects are pre-advanced
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Address review issues
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Separate merge series sets
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Clean
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Refactor merge querier failure handling
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Refactored and simplified fanout with improvements from incoming chunk iterator PRs.
* Secondary logic is hidden, instead of weird failed series set logic we had.
* Fanout is well commented
* Fanout closing record all errors
* MergeQuerier improved API (clearer)
* deferredGenericMergeSeriesSet is not needed as we return no samples anyway for failed series sets (next = false).
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fix formatting
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Fix CI issues
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Added final tests for error handling.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Addressed Brian's comments.
* Moved hints in populate to be allocated only when needed.
* Used sync.Once in secondary Querier to achieve all-or-nothing partial response logic.
* Select after first Next is done will panic.
NOTE: in lazySeriesSet in theory we could just panic, I think however we can
totally just return error, it will panic in expand anyway.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Utilize errWithWarnings
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Fix recently introduced expansion issue
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Add tests for secondary querier error handling
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Implement lazy merge
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Add name to test cases
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Reorganize
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Address review comments
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Address review comments
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Remove redundant warnings
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Fix rebase mistake
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Use go1.14 new hash/maphash to hash both RHS and LHS instead of XOR'ing
which has been resulting in hash collisions.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Refactor engine labelset signature generation, just use labels.Labels
instead of hashes.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address review comments; function comments + store result of
lhs.String+rhs.String as key.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Replace all signatureFunc usage with signatureFuncString.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Make optimizations to labels String function and generation of rhs+lhs
as string in resultMetric.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Use separate string functions that don't use strconv just for engine
maps.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Use a byte invalid separator instead of quoting and have a buffer
attached to EvalNodeHelper instead of using a global pool in the labels
package.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address more review comments, labels has a function that now builds a
byte slice without turning it into a string.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Use two different non-ascii hex codes as byte separators between labels
and between sets of labels when building bytes of a Labels struct.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* We only need the 2nd byte invalid sep. at the beginning of a
labels.Bytes
Signed-off-by: Callum Styan <callumstyan@gmail.com>
time.Unix attaches the local timezone, which can then
leak out (e.g. in the alert json). While this is harmless,
we should be consistent.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
* PromQL: Fix lexer error handling
This fixes bugs in the handling of lexer errors that are only noticeable for users of the language server and caused https://github.com/prometheus-community/promql-langserver/issues/104 .
Signed-off-by: Tobias Guggenmos <tobias.guggenmos@uni-ulm.de>
* Add test for error position ranges
Signed-off-by: Tobias Guggenmos <tobias.guggenmos@uni-ulm.de>
This addresses fabxc's TODO.
More importantly, it now properly defers the
querier.Close(). Previously, if a panic happened after creation of the
querier within the populateSeries function, querier.Close() was never called.
The latter was responsible for #6977.
Signed-off-by: beorn7 <beorn@grafana.com>
This is technically BREAKING CHANGE, but it was like this from the beginning: I just notice that we rely in
Prometheus on remote read being sorted. This is because we use selected data from remote reads in MergeSeriesSet
which rely on sorting.
I found during work on https://github.com/prometheus/prometheus/pull/5882 that
we do so many repetitions because of this, for not good reason. I think
I found a good balance between convenience and readability with just one method.
Smaller the interface = better.
Also I don't know what TestSelectSorted was testing, but now it's testing sorting.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
This PR fixes the regression tests for the issue fixed in #6931 .
The reason for that is that all of the invalid queries that triggered the regression have become more or less valid syntax in #6933 (they might still fail typechecking).
Signed-off-by: Tobias Guggenmos <tobias.guggenmos@uni-ulm.de>
This is part of https://github.com/prometheus/prometheus/pull/5882 that can be done to simplify things.
All todos I added will be fixed in follow up PRs.
* querier.Querier, querier.Appender, querier.SeriesSet, and querier.Series interfaces merged
with storage interface.go. All imports that.
* querier.SeriesIterator replaced by chunkenc.Iterator
* Added chunkenc.Iterator.Seek method and tests for xor implementation (?)
* Since we properly handle SelectParams for Select methods I adjusted min max
based on that. This should help in terms of performance for queries with functions like offset.
* added Seek to deletedIterator and test.
* storage/tsdb was removed as it was only a unnecessary glue with incompatible structs.
No logic was changed, only different source of abstractions, so no need for benchmarks.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Make lookbackDelta a option of QueryEngine
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* julius' suggestion
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* remove trivial getter
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Assume lookback delta is always > 0
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* add debug log
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* don't expose loopback delta
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Specify that lookack delta is also used in federation
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Fix federation test
While we have added some logic to the promql engine to keep it backwards
compatible and have a 5 minute loopback by default, the web/ package is
likely to really be internal to Prometheus and we should not add the
same kind of heuritstics here.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* loopback delta: Fix debug log
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
Since we use ActiveQueryTracker to check for concurrency in
d992c36b3a it does not make sense to keep
the MaxConcurrent value as an option of the PromQL engine.
This pull request removes it from the PromQL engine options, sets the
max concurrent metric to -1 if there is no active query tracker, and use
the value of the active query tracker otherwise.
It removes dead code and also will inform people who import the promql
package that we made that change, as it breaks the EngineOpts struct.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
The windows clock is sometime off by 25ms, and as precise as 15ms.
Let's give it more time to avoid flaky tests.
Fix#6672
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Move check for empty VectorSelector to typeChecking
* Move check for twice set metric name to typeChecking
* Make child of MatrixSelector a general Node
* rename checkType to checkAST
* Rename fail to addParseErr
* Remove trailing whitespace
Signed-off-by: Tobias Guggenmos <tguggenm@redhat.com>
Fixes#6649.
The crash is fixed here, was caused because some AST sanity checks were performed on the syntax tree while assembling it. In case of previous parsing errors this could lead to undefined behaviour.
The fix is to move the checks to the typechecking phase, which runs only when a syntax tree was assembled without there being parsing errors.
There are other places, where similiar checks are performed while assembling the syntax tree. It might be a good idea to move those to the typechecking phase, too. Should I do this in the same or a separate PR?
Signed-off-by: Tobias Guggenmos <tguggenm@redhat.com>
* PromQL: Use a sync.Pool for the generated parser structure
The generated PromQL parser allocates a struct about 4kb in size on every run.
This puts a high load on the garbage collector.
To reduce that load, a sync.Pool is used to recycle these structures.
On small queries this makes parsing 2-3 times faster.
Signed-off-by: Tobias Guggenmos <tguggenm@redhat.com>
During the PromQL parser rewrite there was some logic put in place that allowed switching between the non generated and the generated parser. Since the parser is now fully generated this is not needed anymore.
Signed-off-by: Tobias Guggenmos <tguggenm@redhat.com>
* Cleanup PromQL functions
The engine ensures, for Matrix functions, that functions are called with exactly one series at the time.
Therefore a lot of code can be inlined and we can directly assume the first element of the arguments exists and contains all the samples needed.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
The parser benchmarks called the `ParseMetric` function instead of the `ParseExpr` function, which resulted in parsing failing every time.
This means only the case of PromQL parser failure was benchmarked.
Signed-off-by: Tobias Guggenmos <tguggenm@redhat.com>
* Add parser method to produce errors messages about unexpected items
* PromQL: use parser.unexpected in generated parser
Signed-off-by: Tobias Guggenmos <tguggenm@redhat.com>
* Add grammar for label_sets
* Parse label Sets using the generated parser
* Allow trailing commas for label sets and selectors
* Add test to trigger all possible error messages for label matchers
Signed-off-by: Tobias Guggenmos <tguggenm@redhat.com>
The most common format (used by go, gcc and clang) for compiler error positions seems to be
`filename:line:char:` or `line:char:` if the filename is unknown.
This PR adapts the PromQL parser to use this convention.
Signed-off-by: Tobias Guggenmos <tguggenm@redhat.com>
This PR exports the list of supported PromQL functions and their signatures.
The reason for that is that the PromQL language server likes to use that list.
Signed-off-by: Tobias Guggenmos <tguggenm@redhat.com>
* promql: Allow injecting fake tokens into the generated parser
Yacc grammars do not support having multiple start symbols.
To work around that restriction, it is possible to inject fake tokens into the lexer stream,
as described here https://www.gnu.org/software/bison/manual/html_node/Multiple-start_002dsymbols.html .
This is part of the parser rewrite effort described in #6256.
Signed-off-by: Tobias Guggenmos <tguggenm@redhat.com>
For yacc generated parsers there is the convention to capitalize the names of item types provided by the lexer, which makes it easy to distinct lexer tokens (capitalized) from nonterminal symbols (not capitalized) in language grammars.
This convention is also followed by the (non generated) go compiler (see https://golang.org/pkg/go/token/#Token).
Part of the parser rewrite described in #6256.
Signed-off-by: Tobias Guggenmos <tguggenm@redhat.com>
This is the first step towards a generated lexer as described in #6256.
It adds methods to the parser struct, that make it implement the yyLexer interface required by a yacc generated parser, as described here: https://godoc.org/golang.org/x/tools/cmd/goyacc .
The yyLexer interface is implemented by the parser struct instead of the lexer struct for the following reasons:
* Both parsers have a lookahead that the lexer does not know about. This solution makes it possible to synchronize these lookaheads when switching parsers.
* The routines to handle parser errors are not accessible to the lexer.
Signed-off-by: Tobias Guggenmos <tguggenm@redhat.com>
* promql: Clean up parser struct
The parser struct used two have two somewhat misused fields:
peekCount int
token [3]item
By reading the code carefully one notices, that peekCount always has the value 0 or 1 and that only the first element of token is ever accessed.
To make this clearer, this commit replaces the token array with a single variable and the peekCount int with a boolean.
Signed-off-by: Tobias Guggenmos <tguggenm@redhat.com>
