Iván Ovejero
7a86d36068
feat(core): Allow user role modification ( #7797 )
...
https://linear.app/n8n/issue/PAY-985
```
PATCH /users/:id/role
unauthenticated user
✓ should receive 401 (349 ms)
member
✓ should fail to demote owner to member (349 ms)
✓ should fail to demote owner to admin (359 ms)
✓ should fail to demote admin to member (381 ms)
✓ should fail to promote other member to owner (353 ms)
✓ should fail to promote other member to admin (377 ms)
✓ should fail to promote self to admin (354 ms)
✓ should fail to promote self to owner (371 ms)
admin
✓ should receive 400 on invalid payload (351 ms)
✓ should receive 404 on unknown target user (351 ms)
✓ should fail to demote owner to admin (349 ms)
✓ should fail to demote owner to member (347 ms)
✓ should fail to promote member to owner (384 ms)
✓ should fail to promote admin to owner (350 ms)
✓ should be able to demote admin to member (354 ms)
✓ should be able to demote self to member (350 ms)
✓ should be able to promote member to admin (349 ms)
owner
✓ should be able to promote member to admin (349 ms)
✓ should be able to demote admin to member (349 ms)
✓ should fail to demote self to admin (348 ms)
✓ should fail to demote self to member (354 ms)
```
2023-11-24 11:40:08 +01:00
Val
865192adf0
feat: Add global admin role (no-changelog) ( #7781 )
...
Github issue / Community forum post (link here to close automatically):
2023-11-23 13:38:11 +00:00
Michael Auerswald
5835e055d3
fix(editor): Show nice error when environment is not set up ( #7778 )
...
Adds a nicer error message with a link for owners who press Push to Git
without having a repository connected yet.
2023-11-23 13:50:03 +01:00
Iván Ovejero
fdb2c18ecc
fix(core): Tighten checks for multi-main setup usage ( #7788 )
...
https://n8nio.slack.com/archives/C05HRPLSGTT/p1700731476321999?thread_ts=1700729359.746899&cid=C05HRPLSGTT
2023-11-23 12:18:39 +01:00
Csaba Tuncsik
e128b23a2b
build: Upgrade to Vite 5 ( #7784 )
2023-11-23 11:55:02 +01:00
Milorad FIlipović
77bc8ecd4b
feat(editor): Show avatars for users currently working on the same workflow ( #7763 )
...
This PR introduces the following changes:
- New Vue stores: `collaborationStore` and `pushConnectionStore`
- Front-end push connection handling overhaul: Keep only a singe
connection open and handle it from the new store
- Add user avatars in the editor header when there are multiple users
working on the same workflow
- Sending a heartbeat event to back-end service periodically to confirm
user is still active
- Back-end overhauls (authored by @tomi):
- Implementing a cleanup procedure that removes inactive users
- Refactoring collaboration service current implementation
---------
Co-authored-by: Tomi Turtiainen <10324676+tomi@users.noreply.github.com>
2023-11-23 10:14:34 +01:00
Michael Kret
99a9ea497a
feat(core): Add Support for custom CORS origins for webhooks ( #7455 )
...
node-850
https://community.n8n.io/t/add-ability-to-set-cors-allow-list-in-n8n-webhooks/7610
https://community.n8n.io/t/configure-cors-pre-flight-request-option-method-in-the-roadmap/32189
---------
Co-authored-by: कारतोफ्फेलस्क्रिप्ट™ <aditya@netroy.in>
2023-11-22 17:49:56 +01:00
github-actions[bot]
e01617ad64
🚀 Release 1.18.0 ( #7780 )
...
#
[1.18.0](https://github.com/n8n-io/n8n/compare/n8n@1.17.0...n8n@1.18.0 )
(2023-11-22)
### Bug Fixes
* **core:** Account for non-ASCII chars in filename on binary data
download ([#7742 ](https://github.com/n8n-io/n8n/issues/7742 ))
([b4ebb1ab4ebb1a28d#7724 ](https://github.com/n8n-io/n8n/issues/7724 ))
([f96c1d2f96c1d2044#7744 ](https://github.com/n8n-io/n8n/issues/7744 ))
([b7c5c74b7c5c7406f#7750 ](https://github.com/n8n-io/n8n/issues/7750 ))
([6be453b6be453b716#7723 ](https://github.com/n8n-io/n8n/issues/7723 ))
([e2ffd39e2ffd397fc#7730 ](https://github.com/n8n-io/n8n/issues/7730 ))
([ebee1a5ebee1a5908#7761 ](https://github.com/n8n-io/n8n/issues/7761 ))
([366cd67366cd672a7#7766 ](https://github.com/n8n-io/n8n/issues/7766 ))
([0d3d33d0d3d33dd1f#7722 ](https://github.com/n8n-io/n8n/issues/7722 ))
([44d3b3e44d3b3ed7e#7764 ](https://github.com/n8n-io/n8n/issues/7764 ))
([ff0b651ff0b6511f7#7608 ](https://github.com/n8n-io/n8n/issues/7608 ))
([2064f7f2064f7f251#7734 ](https://github.com/n8n-io/n8n/issues/7734 ))
([ce002a6ce002a6cc6#7729 ](https://github.com/n8n-io/n8n/issues/7729 ))
([5d4a52d5d4a52d3b7#7678 ](https://github.com/n8n-io/n8n/issues/7678 ))
([4f307644f307646f3#7751 ](https://github.com/n8n-io/n8n/issues/7751 ))
([82f320282f3202a2d#7721 ](https://github.com/n8n-io/n8n/issues/7721 ))
([4dbae0e4dbae0e2e9#7643 ](https://github.com/n8n-io/n8n/issues/7643 ))
([4c408254c4082503c#7620 ](https://github.com/n8n-io/n8n/issues/7620 ))
([8d12c1a8d12c1ad8d#7503 ](https://github.com/n8n-io/n8n/issues/7503 ))
([188176518817651ec
2023-11-22 14:32:25 +01:00
कारतोफ्फेलस्क्रिप्ट™
db77353272
fix(core): Pass correct node reference to NodeExecuteFunctions.getLoadOptionsFunctions (no-changelog) ( #7779 )
...
NODE-947
2023-11-22 13:24:23 +01:00
Milorad FIlipović
2064f7f251
fix(editor): Validate user info before submiting ( #7608 )
...
Validate first and last names before saving them to database. This
should prevent security issue with un-sanitized data that ends up in
emails.
---------
Co-authored-by: कारतोफ्फेलस्क्रिप्ट™ <aditya@netroy.in>
2023-11-22 12:14:44 +01:00
कारतोफ्फेलस्क्रिप्ट™
9b4856e7de
feat(core): Make postgres pool-size configurable (no-changelog) ( #7772 )
...
When we upgrade typeorm in #5151 , we switched from no pooling to a
default pool-size of 10. This somehow significantly deteriorates the
performance of queries when the application is under load.
2023-11-21 18:13:08 +01:00
Iván Ovejero
3459eb6c2f
refactor(core): Include execution progress in save settings (no-changelog) ( #7769 )
2023-11-21 17:33:44 +01:00
Iván Ovejero
b7c5c7406f
fix(core): Ensure failed executions are saved in queue mode ( #7744 )
...
This PR adds `status` to run data so that
`determineFinalExecutionStatus` resolves correctly on execution failure
and removes the cleanup that is being duplicated in a worker hook.
Followup to https://github.com/n8n-io/n8n/pull/7138
Should fix:
- https://github.com/n8n-io/n8n/issues/7705
-
https://linear.app/n8n/issue/PAY-964/no-execution-found-after-execution-fails
-
https://linear.app/n8n/issue/PAY-1010/execution-deletion-in-queue-mode-not-complying-with-settings
2023-11-20 16:03:02 +01:00
Iván Ovejero
6d19f88080
refactor(core): Stop reporting to Sentry unknown cred on mapping (no-changelog) ( #7752 )
...
https://n8nio.sentry.io/issues/4563418905
2023-11-17 16:17:44 +01:00
Iván Ovejero
4c4082503c
feat(core): Coordinate manual workflow activation and deactivation in multi-main scenario ( #7643 )
...
Followup to #7566 | Story: https://linear.app/n8n/issue/PAY-926
### Manual workflow activation and deactivation
In a multi-main scenario, if the user manually activates or deactivates
a workflow, the process (whether leader or follower) that handles the
PATCH request and updates its internal state should send a message into
the command channel, so that all other main processes update their
internal state accordingly:
- Add to `ActiveWorkflows` if activating
- Remove from `ActiveWorkflows` if deactivating
- Remove and re-add to `ActiveWorkflows` if the update did not change
activation status.
After updating their internal state, if activating or deactivating, the
recipient main processes should push a message to all connected
frontends so that these can update their stores and so reflect the value
in the UI.
### Workflow activation errors
On failure to activate a workflow, the main instance should record the
error in Redis - main instances should always pull activation errors
from Redis in a multi-main scenario.
### Leadership change
On leadership change...
- The old leader should stop pruning and the new leader should start
pruning.
- The old leader should remove trigger- and poller-based workflows and
the new leader should add them.
2023-11-17 15:58:50 +01:00
कारतोफ्फेलस्क्रिप्ट™
db094f2d7e
fix(core): Fix all dependency versions for backend packages (no-changelog) ( #7745 )
...
Once the packages are published to NPM, they don't have the
`pnpm-lock.yaml` to fix dependency versions. Which means that any
dependency with `^` gets auto-upgrade to the latest matching minor,
which can cause issues like
[this](https://github.com/node-cache-manager/node-cache-manager/issues/611 ).
2023-11-17 13:49:18 +01:00
कारतोफ्फेलस्क्रिप्ट™
fc60e9a809
refactor(core): Convert dynamic node-parameter routes to a decorated controller (no-changelog) ( #7284 )
...
1. Reduce a lot of code duplication
2. Move more endpoints out of `Server.ts`
3. Move all query-param parsing and validation into a middleware to make
the route handlers simpler.
2023-11-17 12:03:05 +01:00
Iván Ovejero
0408299c7d
refactor(core): Stop reporting to Sentry unrecognized node errors (no-changelog) ( #7728 )
...
https://n8nio.sentry.io/issues/4636584213
2023-11-17 10:25:10 +01:00
Iván Ovejero
b4ebb1a28d
fix(core): Account for non-ASCII chars in filename on binary data download ( #7742 )
...
https://n8nio.sentry.io/issues/4641538638
2023-11-17 10:07:44 +01:00
Ricardo Espinoza
8e0ae3cf8c
refactor: Extract Invitation routes to InvitationController (no-changelog) ( #7726 )
...
This PR:
- Creates `InvitationController`
- Moves `POST /users` to `POST /invitations` and move related test to
`invitations.api.tests`
- Moves `POST /users/:id` to `POST /invitations/:id/accept` and move
related test to `invitations.api.tests`
- Adjusts FE to use new endpoints
- Moves all the invitation logic to the `UserService`
---------
Co-authored-by: कारतोफ्फेलस्क्रिप्ट™ <aditya@netroy.in>
2023-11-16 12:39:43 -05:00
Csaba Tuncsik
e2ffd397fc
fix(editor): Handle permission edge cases (empty scopes) ( #7723 )
2023-11-16 18:08:23 +01:00
Val
d39bb2540f
feat: Add scopes to /login endpoint (no-changelog) ( #7718 )
...
Github issue / Community forum post (link here to close automatically):
2023-11-16 11:11:55 +00:00
Michael Auerswald
f96c1d2044
fix(core): Correct permissions for getstatus ( #7724 )
2023-11-15 16:54:33 +01:00
github-actions[bot]
93103c0b08
🚀 Release 1.17.0 ( #7720 )
...
#
[1.17.0](https://github.com/n8n-io/n8n/compare/n8n@1.16.0...n8n@1.17.0 )
(2023-11-15)
### Bug Fixes
* **Convert to/from binary data Node:** Better mime type defaults
([#7693 ](https://github.com/n8n-io/n8n/issues/7693 ))
([9b3be0c9b3be0cfd8#7699 ](https://github.com/n8n-io/n8n/issues/7699 ))
([0e00dab0e00dab9f5#7688 ](https://github.com/n8n-io/n8n/issues/7688 ))
([4441ed54441ed5116#7628 ](https://github.com/n8n-io/n8n/issues/7628 )
* **core:** Initialize JWT Secret before it's used anywhere
([#7707 ](https://github.com/n8n-io/n8n/issues/7707 ))
([3460eb53460eb5eeb#7663 ](https://github.com/n8n-io/n8n/issues/7663 ))
([9fd63199fd6319583#7675 ](https://github.com/n8n-io/n8n/issues/7675 ))
([d2d11e0d2d11e0208#7664 ](https://github.com/n8n-io/n8n/issues/7664 ))
([00dff5000dff50140#7685 ](https://github.com/n8n-io/n8n/issues/7685 ))
([37dd65837dd658dc5#7645 ](https://github.com/n8n-io/n8n/issues/7645 ))
([020042e020042ef1a#7684 ](https://github.com/n8n-io/n8n/issues/7684 ))
([88efb9988efb99587#7686 ](https://github.com/n8n-io/n8n/issues/7686 ))
([48b240b48b240b026#7653 ](https://github.com/n8n-io/n8n/issues/7653 )
* **HubSpot Node:** Fetching available parameters fails when using
expressions ([#7672 ](https://github.com/n8n-io/n8n/issues/7672 ))
([a9ab738a9ab73896e#7673 ](https://github.com/n8n-io/n8n/issues/7673 ))
([3c0734b3c0734bd2d#7701 ](https://github.com/n8n-io/n8n/issues/7701 ))
([786b4ad786b4adcce#7660 ](https://github.com/n8n-io/n8n/issues/7660 ))
([1c7225e1c7225ebdb#7661 ](https://github.com/n8n-io/n8n/issues/7661 ))
([aea3c50aea3c50131#5351 ](https://github.com/n8n-io/n8n/issues/5351 ))
([6a53c2a6a53c2a375#7674 ](https://github.com/n8n-io/n8n/issues/7674 ))
([2e8c8412e8c841277#7453 ](https://github.com/n8n-io/n8n/issues/7453 ))
([83593648359364536#7157 ](https://github.com/n8n-io/n8n/issues/7157 ))
([14035e114035e1244#7456 ](https://github.com/n8n-io/n8n/issues/7456 ))
([afd637bafd637b5ea#7600 ](https://github.com/n8n-io/n8n/issues/7600 ))
([cbc6909cbc690907f#7529 ](https://github.com/n8n-io/n8n/issues/7529 ))
([0a0798e0a0798e485#7655 ](https://github.com/n8n-io/n8n/issues/7655 ))
([a9c7188a9c7188c4d#7547 ](https://github.com/n8n-io/n8n/issues/7547 ))
([5aee2b75aee2b768f#7679 ](https://github.com/n8n-io/n8n/issues/7679 ))
([819b3a7819b3a746a#7689 ](https://github.com/n8n-io/n8n/issues/7689 ))
([a08fca5a08fca51d9#7696 ](https://github.com/n8n-io/n8n/issues/7696 ))
([b2ca050b2ca050031
2023-11-15 15:18:08 +01:00
कारतोफ्फेलस्क्रिप्ट™
2844ce2bd2
ci: Fix env issues in e2e tests (no-changelog) ( #7719 )
2023-11-15 13:58:38 +01:00
Ricardo Espinoza
4020c14d59
refactor: Use POST /users to re-invite users (no-changelog) ( #7714 )
2023-11-15 06:40:57 -05:00
कारतोफ्फेलस्क्रिप्ट™
3460eb5eeb
fix(core): Initialize JWT Secret before it's used anywhere ( #7707 )
...
HELP-394
2023-11-15 12:17:18 +01:00
कारतोफ्फेलस्क्रिप्ट™
4441ed5116
fix(core): Fix named parameter resolution in migrations ( #7688 )
...
Fixes #7628
2023-11-15 10:31:08 +01:00
Michael Auerswald
0e00dab9f5
fix(core): Consider subworkflows successfully run when in waiting state ( #7699 )
...
Github issue / Community forum post (link here to close automatically):
https://github.com/n8n-io/n8n/issues/7189
2023-11-14 11:04:24 +01:00
Elias Meire
14035e1244
feat(editor): Add HTTP request nodes for credentials without a node ( #7157 )
...
Github issue / Community forum post (link here to close automatically):
---------
Co-authored-by: Giulio Andreini <g.andreini@gmail.com>
Co-authored-by: कारतोफ्फेलस्क्रिप्ट™ <aditya@netroy.in>
2023-11-13 12:11:16 +01:00
Iván Ovejero
b2ca050031
perf(core): Lazyload security audit reporters ( #7696 )
...
Also converting to service.
Followup to https://github.com/n8n-io/n8n/pull/7663
2023-11-13 11:50:43 +01:00
Michael Auerswald
cbc690907f
feat(editor): Adds a EE view to show worker details and job status ( #7600 )
...
This change expands on the command channel communication introduced
lately between the main instance(s) and the workers. The frontend gets a
new menu entry "Workers" which will, when opened, trigger a regular call
to getStatus from the workers. The workers then respond via their
response channel to the backend, which then pushes the status to the
frontend.
This introduces the use of ChartJS for metrics.
This feature is still in MVP state and thus disabled by default for the
moment.
2023-11-10 23:48:31 +01:00
Ricardo Espinoza
0ddafd2b82
test: Unify users.controller.test and users.api.test (no-changelog) ( #7658 )
...
Groundwork to be able to safely refactor and move the invitation logic
to the UserService.
Fixes ADO-1358
---------
Co-authored-by: कारतोफ्फेलस्क्रिप्ट™ <aditya@netroy.in>
2023-11-10 09:41:58 -05:00
कारतोफ्फेलस्क्रिप्ट™
000e76e3b4
ci(core): Reduce memory usage in tests (part-2) (no-changelog) ( #7671 )
...
This also gets rid of `Db.collection`, which was another source of
circular dependencies.
2023-11-10 15:04:26 +01:00
Iván Ovejero
f73a0597ba
refactor: Add rule no-constant-binary-expression (no-changelog) ( #7670 )
...
https://eslint.org/docs/latest/rules/no-constant-binary-expression
2023-11-09 17:50:59 +01:00
कारतोफ्फेलस्क्रिप्ट™
9fd6319583
fix(core): Reduce memory usage in credentials risk auditing ( #7663 )
2023-11-09 14:39:16 +01:00
कारतोफ्फेलस्क्रिप्ट™
5edf722209
ci: Stop disabling linting rules that are explicitly set to warn (no-changelog) ( #7669 )
2023-11-09 14:05:39 +01:00
Iván Ovejero
16a1a92f18
refactor(core): Stop reporting to Sentry credential-not-found error (no-changelog) ( #7665 )
...
https://n8nio.sentry.io/issues/4528134408
2023-11-09 10:55:13 +01:00
कारतोफ्फेलस्क्रिप्ट™
0346b211a7
ci(core): Reduce memory usage in tests (part-1) (no-changelog) ( #7654 )
2023-11-08 16:29:39 +01:00
github-actions[bot]
e5c6a1bdf9
🚀 Release 1.16.0 ( #7652 )
...
#
[1.16.0](https://github.com/n8n-io/n8n/compare/n8n@1.15.1...n8n@1.16.0 )
(2023-11-08)
### Bug Fixes
* **core:** Comply with custom default for workflow saving settings
([#7634 ](https://github.com/n8n-io/n8n/issues/7634 ))
([48c068f48c068f97b#7598 ](https://github.com/n8n-io/n8n/issues/7598 ))
([2aa7f632aa7f6375a#7621 ](https://github.com/n8n-io/n8n/issues/7621 ))
([a994ba5a994ba5e8d#7626 ](https://github.com/n8n-io/n8n/issues/7626 ))
([f748de9f748de9567#7618 ](https://github.com/n8n-io/n8n/issues/7618 ))
([26361df26361dfcd3#6229 ](https://github.com/n8n-io/n8n/issues/6229 )
* **core:** Make password-reset urls valid only for single-use
([#7622 ](https://github.com/n8n-io/n8n/issues/7622 ))
([603142460314248f4#7619 ](https://github.com/n8n-io/n8n/issues/7619 ))
([5df583f5df583f783#7591 ](https://github.com/n8n-io/n8n/issues/7591 ))
([2854a0c2854a0cf46#7596 ](https://github.com/n8n-io/n8n/issues/7596 ))
([db56a9edb56a9ee37#7603 ](https://github.com/n8n-io/n8n/issues/7603 ))
([151e60f151e60f829#7644 ](https://github.com/n8n-io/n8n/issues/7644 ))
([3d5a4853d5a485bcf#7597 ](https://github.com/n8n-io/n8n/issues/7597 ))
([b532a7bb532a7bdb7#7582 ](https://github.com/n8n-io/n8n/issues/7582 ))
([d633753d633753687#7625 ](https://github.com/n8n-io/n8n/issues/7625 ))
([78b84af78b84af8d1#7602 ](https://github.com/n8n-io/n8n/issues/7602 ))
([c92402ac92402a3ca#7616 ](https://github.com/n8n-io/n8n/issues/7616 ))
([32b85ba32b85ba2fe#7449 ](https://github.com/n8n-io/n8n/issues/7449 ))
([59dc36a59dc36abd9#7566 ](https://github.com/n8n-io/n8n/issues/7566 ))
([c857e42c857e42677#7570 ](https://github.com/n8n-io/n8n/issues/7570 ))
([ac87701ac877014ed#7586 ](https://github.com/n8n-io/n8n/issues/7586 ))
([7dac9ab7dac9ab82c#7604 ](https://github.com/n8n-io/n8n/issues/7604 ))
([5790e255790e251b8#7489 ](https://github.com/n8n-io/n8n/issues/7489 ))
([e6d3d1ae6d3d1a4c2#7329 ](https://github.com/n8n-io/n8n/issues/7329 ))
([da2d2a8da2d2a83bb
2023-11-08 14:20:22 +01:00
Iván Ovejero
3a776e0132
refactor(core): Stop reporting to Sentry missing-node-on-retry error (no-changelog) ( #7648 )
...
https://n8nio.sentry.io/issues/4612370603
2023-11-08 10:09:33 +01:00
Iván Ovejero
48c068f97b
fix(core): Comply with custom default for workflow saving settings ( #7634 )
...
https://linear.app/n8n/issue/PAY-982
2023-11-07 16:26:55 +01:00
Tomi Turtiainen
ac877014ed
feat(core): Initial support for two-way communication over websockets ( #7570 )
...
- Enable two-way communication with web sockets
- Enable sending push messages to specific users
- Add collaboration service for managing active users for workflow
Missing things:
- State is currently kept only in memory, making this not work in
multi-master setups
- Removing a user from active users in situations where they go inactive
or we miss the "workflow closed" message
- I think a timer based solution for this would cover most edge cases.
I.e. have FE ping every X minutes, BE removes the user unless they have
received a ping in Y minutes, where Y > X
- FE changes to be added later by @MiloradFilipovic
Github issue / Community forum post (link here to close automatically):
---------
Co-authored-by: कारतोफ्फेलस्क्रिप्ट™ <aditya@netroy.in>
2023-11-07 17:26:45 +02:00
कारतोफ्फेलस्क्रिप्ट™
f0fc5b16d3
ci(core): Load config schema after process.env has been overwritten (no-changelog) ( #7550 )
2023-11-07 15:58:28 +01:00
कारतोफ्फेलस्क्रिप्ट™
60314248f4
fix(core): Make password-reset urls valid only for single-use ( #7622 )
2023-11-07 15:35:43 +01:00
Ricardo Espinoza
b3470fd64d
fix: Error handling on forgot password page (no-changelog) ( #7633 )
...
fixes:
https://linear.app/n8n/issue/ADO-1339/fix-error-handling-on-forgot-password-page
2023-11-07 08:45:58 -05:00
Iván Ovejero
f748de9567
fix(core): Ensure pruning starts only after migrations have completed ( #7626 )
...
https://linear.app/n8n/issue/PAY-986/bug-execution-pruning-timer-is-started-before-the-database-is-ready
---------
Co-authored-by: कारतोफ्फेलस्क्रिप्ट™ <aditya@netroy.in>
2023-11-07 13:56:01 +01:00
Iván Ovejero
c857e42677
feat(core): Coordinate workflow activation in multiple main scenario in internal API ( #7566 )
...
Story: https://linear.app/n8n/issue/PAY-926
This PR coordinates workflow activation on instance startup and on
leadership change in multiple main scenario in the internal API. Part 3
on manual workflow activation and deactivation will be a separate PR.
### Part 1: Instance startup
In multi-main scenario, on starting an instance...
- [x] If the instance is the leader, it should add webhooks, triggers
and pollers.
- [x] If the instance is the follower, it should not add webhooks,
triggers or pollers.
- [x] Unit tests.
### Part 2: Leadership change
In multi-main scenario, if the main instance leader dies…
- [x] The new main instance leader must activate all trigger- and
poller-based workflows, excluding webhook-based workflows.
- [x] The old main instance leader must deactivate all trigger- and
poller-based workflows, excluding webhook-based workflows.
- [x] Unit tests.
To test, start two instances and check behavior on startup and
leadership change:
```
EXECUTIONS_MODE=queue N8N_LEADER_SELECTION_ENABLED=true N8N_LICENSE_TENANT_ID=... N8N_LICENSE_ACTIVATION_KEY=... N8N_LOG_LEVEL=debug npm run start
EXECUTIONS_MODE=queue N8N_LEADER_SELECTION_ENABLED=true N8N_LICENSE_TENANT_ID=... N8N_LICENSE_ACTIVATION_KEY=... N8N_LOG_LEVEL=debug N8N_PORT=5679 npm run start
```
2023-11-07 13:48:48 +01:00
Iván Ovejero
a994ba5e8d
fix(core): Ensure init before checking leader or follower in multi-main scenario ( #7621 )
...
This PR ensures `MultiMainInstancePublisher` is initialized before
checking if the instance is leader or follower. Followers skip license
init, license check, and pruning start and stop.
2023-11-06 12:03:35 +01:00
Ricardo Espinoza
5790e251b8
feat(core): Rate limit forgot password endpoint ( #7604 )
...
Github issue / Community forum post (link here to close automatically):
---------
Co-authored-by: कारतोफ्फेलस्क्रिप्ट™ <netroy@users.noreply.github.com>
2023-11-03 13:44:12 -04:00
कारतोफ्फेलस्क्रिप्ट™
acec9bad71
refactor(core): Convert OAuth1/OAuth2 routes to decorated controller classes (no-changelog) ( #5973 )
2023-11-03 17:20:54 +01:00
Tomi Turtiainen
2aa7f6375a
fix(core): Decrease reset password token expire time ( #7598 )
...
Decrease the expiration time from 1 day to 20 minutes
Github issue / Community forum post (link here to close automatically):
2023-11-03 13:32:08 +02:00
कारतोफ्फेलस्क्रिप्ट™
bb2c266e48
Merge tag 'n8n@1.15.1'
2023-11-02 18:11:06 +01:00
github-actions[bot]
fbce8f5298
🚀 Release 1.15.1 ( #7592 )
...
##
[1.15.1](https://github.com/n8n-io/n8n/compare/n8n@1.14.0...n8n@1.15.1 )
(2023-11-02)
### Bug Fixes
* **core:** Ensure execution deletion in worker lifecycle hook
([#7481 ](https://github.com/n8n-io/n8n/issues/7481 ))
([742c8a8742c8a8534#7560 ](https://github.com/n8n-io/n8n/issues/7560 ))
([b350568b350568505#7408 ](https://github.com/n8n-io/n8n/issues/7408 ))
([479f902479f90231d#7523 ](https://github.com/n8n-io/n8n/issues/7523 ))
([1055bd31055bd3762#7576 ](https://github.com/n8n-io/n8n/issues/7576 ))
([437c95e437c95e84e#7569 ](https://github.com/n8n-io/n8n/issues/7569 ))
([9bdb85c9bdb85c4ce#7519 ](https://github.com/n8n-io/n8n/issues/7519 ))
([65e559365e5593233#7528 ](https://github.com/n8n-io/n8n/issues/7528 ))
([ae616f1ae616f146b#7544 ](https://github.com/n8n-io/n8n/issues/7544 ))
([3b5e1813b5e181e66#7532 ](https://github.com/n8n-io/n8n/issues/7532 ))
([2853fcf2853fcff73#7434 ](https://github.com/n8n-io/n8n/issues/7434 ))
([12a89e612a89e6d14#7516 ](https://github.com/n8n-io/n8n/issues/7516 ))
([df89685df89685e15#7348 ](https://github.com/n8n-io/n8n/issues/7348 ))
([c05bc67c05bc6728d#7573 ](https://github.com/n8n-io/n8n/issues/7573 ))
([1d81afc1d81afcbdf#7534 ](https://github.com/n8n-io/n8n/issues/7534 ))
([97627059762705833#7555 ](https://github.com/n8n-io/n8n/issues/7555 ))
([7a56e587a56e58a60#7460 ](https://github.com/n8n-io/n8n/issues/7460 ))
([655efea655efeaf66#7526 ](https://github.com/n8n-io/n8n/issues/7526 ))
([3d95b243d95b243e9#7527 ](https://github.com/n8n-io/n8n/issues/7527 ))
([442c73e442c73e63b#7559 ](https://github.com/n8n-io/n8n/issues/7559 ))
([ce14f62ce14f6266b#5993 ](https://github.com/n8n-io/n8n/issues/5993 ))
([cc2bd2ecc2bd2e19c#7572 ](https://github.com/n8n-io/n8n/issues/7572 ))
([ff279abff279ab411#7474 ](https://github.com/n8n-io/n8n/issues/7474 ))
([b72040ab72040aa54#6980 ](https://github.com/n8n-io/n8n/pull/6980 ))
([07467830746783e02
2023-11-02 14:52:11 +01:00
Iván Ovejero
1c77d6597f
refactor(core): Ensure only leader handles licensing in multi-main scenario ( #7558 )
...
https://linear.app/n8n/issue/PAY-953/ensure-only-main-instance-leader-handles-licensing
2023-11-02 14:16:22 +01:00
Tomi Turtiainen
7dac9ab82c
feat(core): Log executed migrations with info level ( #7586 )
...
To help debugging possible issues in startup and migrations, log the
executed migrations with log level 'info', instead of 'debug'.
Github issue / Community forum post (link here to close automatically):
2023-11-02 14:24:04 +02:00
Iván Ovejero
921d213ae5
refactor(core): Create pruning service (no-changelog) ( #7564 )
...
https://linear.app/n8n/issue/PAY-954/ensure-only-main-instance-leader-handles-pruning
2023-11-02 12:24:25 +01:00
github-actions[bot]
73e9a216b7
🚀 Release 1.15.0 ( #7580 )
...
#
[1.15.0](https://github.com/n8n-io/n8n/compare/n8n@1.14.0...n8n@1.15.0 )
(2023-11-02)
### Bug Fixes
* **core:** Ensure execution deletion in worker lifecycle hook
([#7481 ](https://github.com/n8n-io/n8n/issues/7481 ))
([742c8a8742c8a8534#7560 ](https://github.com/n8n-io/n8n/issues/7560 ))
([b350568b350568505#7408 ](https://github.com/n8n-io/n8n/issues/7408 ))
([479f902479f90231d#7523 ](https://github.com/n8n-io/n8n/issues/7523 ))
([1055bd31055bd3762#7576 ](https://github.com/n8n-io/n8n/issues/7576 ))
([437c95e437c95e84e#7569 ](https://github.com/n8n-io/n8n/issues/7569 ))
([9bdb85c9bdb85c4ce#7519 ](https://github.com/n8n-io/n8n/issues/7519 ))
([65e559365e5593233#7528 ](https://github.com/n8n-io/n8n/issues/7528 ))
([ae616f1ae616f146b#7544 ](https://github.com/n8n-io/n8n/issues/7544 ))
([3b5e1813b5e181e66#7532 ](https://github.com/n8n-io/n8n/issues/7532 ))
([2853fcf2853fcff73#7434 ](https://github.com/n8n-io/n8n/issues/7434 ))
([12a89e612a89e6d14#7516 ](https://github.com/n8n-io/n8n/issues/7516 ))
([df89685df89685e15#7348 ](https://github.com/n8n-io/n8n/issues/7348 ))
([c05bc67c05bc6728d#7534 ](https://github.com/n8n-io/n8n/issues/7534 ))
([97627059762705833#7555 ](https://github.com/n8n-io/n8n/issues/7555 ))
([7a56e587a56e58a60#7460 ](https://github.com/n8n-io/n8n/issues/7460 ))
([655efea655efeaf66#7526 ](https://github.com/n8n-io/n8n/issues/7526 ))
([3d95b243d95b243e9#7527 ](https://github.com/n8n-io/n8n/issues/7527 ))
([442c73e442c73e63b#7559 ](https://github.com/n8n-io/n8n/issues/7559 ))
([ce14f62ce14f6266b#5993 ](https://github.com/n8n-io/n8n/issues/5993 ))
([cc2bd2ecc2bd2e19c#7572 ](https://github.com/n8n-io/n8n/issues/7572 ))
([ff279abff279ab411#7474 ](https://github.com/n8n-io/n8n/issues/7474 ))
([b72040ab72040aa54#6980 ](https://github.com/n8n-io/n8n/pull/6980 ))
([07467830746783e02
2023-11-02 11:47:11 +01:00
Jon
479f90231d
fix(core): Fix issue that prevents owner logging in when using ldap ( #7408 )
...
This PR prioritises the internal email account over LDAP for the Owner.
---------
Co-authored-by: ricardo <ricardoespinoza105@gmail.com>
2023-11-01 23:02:49 -04:00
Omar Ajoue
437c95e84e
fix(core): Permission check for subworkflow properly checking for workflow settings ( #7576 )
...
The `sharing` related code is legacy that was not removed. Subworkflow
execution should check workflow settings alone, and this is now
reflected in the code.
Github issue / Community forum post (link here to close automatically):
https://community.n8n.io/t/bug-when-using-the-execute-workflow-node-when-workflow-is-shared/32207
---------
Co-authored-by: Iván Ovejero <ivov.src@gmail.com>
2023-11-01 18:31:34 +01:00
कारतोफ्फेलस्क्रिप्ट™
9bdb85c4ce
fix(core): Prevent executions from becoming forever running ( #7569 )
...
Fixes CP-867
Possibly also fixes PAY-323 and PAY-412
2023-11-01 13:51:13 +01:00
Yoshino-s
b72040aa54
feat(n8n Form Trigger Node): Add text area and password input types ( #7474 )
...
Signed-off-by: yoshino-s <cy-cui@outlook.com>
2023-11-01 12:23:28 +00:00
Michael Auerswald
b350568505
fix(core): Fix data decryption on credentials import ( #7560 )
...
Due to a change, during the credentials import command, the core's
Credential object is being called through its prototype. This caused the
Credential's cipher variable to not be set, thus no cipher service being
available during import. This fix catches this edge case and provides a
fix.
2023-10-31 13:15:09 +01:00
Jan Oberhauser
655efeaf66
feat(core): Add optional Error-Output ( #7460 )
...
Add an additional optional error output to which all items get sent that
could not be processed.
Github issue / Community forum post (link here to close automatically):
https://community.n8n.io/t/error-connector-for-nodes/3094
https://community.n8n.io/t/error-handling-at-node-level-detect-node-execution-status/26791
---------
Co-authored-by: OlegIvaniv <me@olegivaniv.com>
2023-10-30 18:42:47 +01:00
Iván Ovejero
442c73e63b
feat(core): Set up leader selection for multiple main instances ( #7527 )
...
https://linear.app/n8n/issue/PAY-933/set-up-leader-selection-for-multiple-main-instances
- [x] Set up new envs
- [x] Add config and license checks
- [x] Implement `MultiMainInstancePublisher`
- [x] Expand `RedisServicePubSubPublisher` to support
`MultiMainInstancePublisher`
- [x] Init `MultiMainInstancePublisher` on startup and destroy on
shutdown
- [x] Add to sandbox plans
- [x] Test manually
Note: This is only for setup - coordinating in reaction to leadership
changes will come in later PRs.
2023-10-30 16:22:32 +01:00
OlegIvaniv
3ab04e4f9e
ci(core): Extract local e2e run script (no-changelog) ( #7551 )
...
Github issue / Community forum post (link here to close automatically):
---------
Signed-off-by: Oleg Ivaniv <me@olegivaniv.com>
Co-authored-by: कारतोफ्फेलस्क्रिप्ट™ <aditya@netroy.in>
2023-10-30 11:18:51 +01:00
Iván Ovejero
233683ce1a
refactor(core): Remove webhook deregistration on shutdown flag ( #7543 )
...
Removal missing from [original
PR](https://github.com/n8n-io/n8n/pull/7515 ) after initial revert.
2023-10-27 18:48:21 +02:00
Iván Ovejero
6796ba75a1
refactor(core): Stop reporting to Sentry stopping execution with wrong status (no-changelog) ( #7541 )
...
https://n8nio.sentry.io/issues/4257040218/
2023-10-27 16:14:01 +02:00
कारतोफ्फेलस्क्रिप्ट™
35bb42c1b9
refactor(core): Avoid passing around static state like default timezone (no-changelog) ( #7221 )
2023-10-27 14:17:52 +02:00
Iván Ovejero
62c096710f
refactor: Run lintfix (no-changelog) ( #7537 )
...
- Fix autofixable violations
- Remove unused directives
- Allow for PascalCased variables - needed for dynamically imported or
assigned classes, decorators, routers, etc.
2023-10-27 14:15:02 +02:00
Omar Ajoue
87996a1fcf
refactor(core): Stop reporting non-error to sentry (issue 4229454473) (no-changelog) ( #7525 )
...
This PR aims to stop reporting issues such as [this
one](https://n8nio.sentry.io/issues/4229454473/events/42b96bfd6a334c15a84499e981cf90eb/?project=4503924908883968 ).
Github issue / Community forum post (link here to close automatically):
2023-10-27 09:25:07 +02:00
Omar Ajoue
3d95b243e9
feat(core): Make queue mode settings configurable ( #7526 )
...
This PR allows users to configure the settings to Bull, possibly
reducing the errors with `maxStalledCount` and other issues, that
usually happen either when a worker crashes or when the event loop is
super busy. Increasing the lease time and the `maxStalledCount` settings
might improve UX.
Github issue / Community forum post (link here to close automatically):
2023-10-26 17:30:16 +02:00
Iván Ovejero
ae8c7a635e
refactor(core)!: Remove webhook deregistration at startup and shutdown ( #7515 )
...
https://linear.app/n8n/issue/PAY-932/deprecate-flag-to-skip-webhook-deregistration-on-shutdown
2023-10-26 14:37:54 +02:00
Iván Ovejero
5477e3fb45
refactor(core): Move execution save settings into lifecycle function (no-changelog) ( #7370 )
...
Move the handling of execution save settings into a tested lifecycle
function as discussed with Omar
2023-10-26 14:35:38 +02:00
कारतोफ्फेलस्क्रिप्ट™
1055bd3762
fix(core): Handle missing resultData in runData ( #7523 )
2023-10-26 13:15:19 +02:00
Iván Ovejero
742c8a8534
fix(core): Ensure execution deletion in worker lifecycle hook ( #7481 )
...
Reported by customer
[here](https://n8nio.slack.com/archives/C05PUALKZHD/p1697446945481249?thread_ts=1697196557.638169&cid=C05PUALKZHD ),
apparently a very old long-standing bug for queue mode. Please review
closely as I am not familiar with queue mode.
2023-10-25 19:13:06 +02:00
कारतोफ्फेलस्क्रिप्ट™
05586a900d
refactor(core): Make Logger a service (no-changelog) ( #7494 )
2023-10-25 16:35:22 +02:00
github-actions[bot]
db4e61ba24
🚀 Release 1.14.0 ( #7514 )
...
# [1.14.0](https://github.com/n8n-io/n8n/compare/n8n@1.13.0...n8n@1.14.0 )
(2023-10-25)
### Features
* **Switch Node:** Add support for infinite Switch outputs
([#7499 ](https://github.com/n8n-io/n8n/issues/7499 ))
([2febc612febc61ec9
2023-10-25 15:34:57 +02:00
कारतोफ्फेलस्क्रिप्ट™
0643487403
ci: Fix oclif manifest generation
2023-10-25 14:51:10 +02:00
github-actions[bot]
2987587e34
🚀 Release 1.13.0 ( #7512 )
...
# [1.13.0](https://github.com/n8n-io/n8n/compare/n8n@1.12.0...n8n@1.13.0 )
(2023-10-25)
### Bug Fixes
* **core:** Do not return `inviteAcceptUrl` in response if email was
sent ([#7465 ](https://github.com/n8n-io/n8n/issues/7465 ))
([55c6a1b55c6a1b0d3#7500 ](https://github.com/n8n-io/n8n/issues/7500 ))
([6f452986f45298d3d#7496 ](https://github.com/n8n-io/n8n/issues/7496 ))
([774fe20](774fe202bf#7461 ](https://github.com/n8n-io/n8n/issues/7461 ))
([83762e083762e051d#7479 ](https://github.com/n8n-io/n8n/issues/7479 ))
([76c048176c04815f7#7485 ](https://github.com/n8n-io/n8n/issues/7485 ))
([519680c519680c2cf#7458 ](https://github.com/n8n-io/n8n/issues/7458 ))
([3c0a1663c0a166f7f#7466 ](https://github.com/n8n-io/n8n/issues/7466 ))
([bc47365bc473655fb#7483 ](https://github.com/n8n-io/n8n/issues/7483 ))
([450e0cc450e0cc66a#7463 ](https://github.com/n8n-io/n8n/issues/7463 ))
([ab6a9bbab6a9bbac2#7467 ](https://github.com/n8n-io/n8n/issues/7467 ))
([a739245a739245332#7498 ](https://github.com/n8n-io/n8n/issues/7498 ))
([baecb93baecb93bef#7464 ](https://github.com/n8n-io/n8n/issues/7464 ))
([5c46bb05c46bb09c1#7444 ](https://github.com/n8n-io/n8n/issues/7444 ))
([4e660234e66023cd4#7505 ](https://github.com/n8n-io/n8n/issues/7505 ))
([05e6f2a05e6f2a6ac#7311 ](https://github.com/n8n-io/n8n/issues/7311 ))
([647372b647372be27#7511 ](https://github.com/n8n-io/n8n/issues/7511 ))
([c47d27dc47d27dd6d#7113 ](https://github.com/n8n-io/n8n/issues/7113 ))
([ac814a9ac814a9c61#7488 ](https://github.com/n8n-io/n8n/issues/7488 ))
([7b1973c7b1973c058#7386 ](https://github.com/n8n-io/n8n/issues/7386 ))
([689360e689360ee06
2023-10-25 14:29:28 +02:00
कारतोफ्फेलस्क्रिप्ट™
6f45298d3d
fix(core): Ensure nodes post-processors run in the correct order ( #7500 )
...
Fixes #7497
2023-10-25 13:59:38 +02:00
Val
93cfabbeac
fix(core): Fix workflow activation with history and workflow history for EE (no-changelog) ( #7508 )
...
Github issue / Community forum post (link here to close automatically):
2023-10-25 11:07:11 +01:00
Iván Ovejero
671c95760b
refactor(core): Make executions pruning more resilient ( #7480 )
...
This PR converts the hard-deletion interval to a timeout:
- to prevent the interval from not being restored when hard deletion
throws, and
- to prevent a long-running hard deletion from leading to duplicate
deletions.
2023-10-24 16:16:45 +02:00
Iván Ovejero
78243edd18
refactor(core): Make pruning via lifecycle configuration in S3 mode mandatory ( #7482 )
...
Since we do not store which executions produced binary data, for pruning
on S3 we need to query for binary data items for each execution in order
to delete them. To minimize requests to S3, allow the user to skip
pruning requests when setting TTL at bucket level.
2023-10-24 10:37:02 +02:00
Cornelius Suermann
3ef771ea38
feat: Collect usage metrics on license renewal (no-changelog) ( #7486 )
2023-10-23 21:39:29 +02:00
Ricardo Espinoza
774fe202bf
fix(core): Fix frontend.settings external hook execution ( #7496 )
2023-10-23 11:46:13 -04:00
Val
41236b7e08
fix: Save new version of the workflow instead of the previous (no-changelog) ( #7428 )
...
Github issue / Community forum post (link here to close automatically):
2023-10-23 16:30:36 +02:00
कारतोफ्फेलस्क्रिप्ट™
b6de910cbe
refactor(core): Abstract away InstanceSettings and encryptionKey into injectable services (no-changelog) ( #7471 )
...
This change ensures that things like `encryptionKey` and `instanceId`
are always available directly where they are needed, instead of passing
them around throughout the code.
2023-10-23 13:39:35 +02:00
कारतोफ्फेलस्क्रिप्ट™
76c04815f7
fix(core): Reduce logging overhead for levels that do not output ( #7479 )
...
all current logging calls execute `callsites()` to figure out what code
tried to log. This happens even for logging methods that aren't supposed
to create any output. Under moderate load, this can take up quite a lot
of resources. This PR changes the logger to make all ignorable logging
methods a No-Op.
In a small benchmark with a simple webhook, with log-level set to
`warn`, and using `ab -c 50 -n 500
http://localhost:5678/webhook/testing `, these were the response times:
### Before
### After
2023-10-20 18:26:33 +02:00
Iván Ovejero
0b42d1aa71
refactor(core): Limit soft-deletions to pruning only ( #7469 )
...
Based on customer feedback, we should limit soft deletions to pruning
only, to prevent executions from piling up in very high volume cases.
2023-10-20 15:02:47 +02:00
Jon
647372be27
feat(core): Add support for oauth based service accounts with UM SMTP ( #7311 )
...
This PR adds support for using OAuth based service accounts for the User
Management SMTP connection.
Tested using a Google Service Account.
2023-10-20 11:36:40 +01:00
Iván Ovejero
b50376cf52
refactor(core): Make executions pruning settings configurable ( #7468 )
2023-10-19 16:57:12 +02:00
कारतोफ्फेलस्क्रिप्ट™
55c6a1b0d3
fix(core): Do not return inviteAcceptUrl in response if email was sent ( #7465 )
2023-10-19 13:58:06 +02:00
कारतोफ्फेलस्क्रिप्ट™
83762e051d
fix(core): Handle gzip and deflate compressed request payloads ( #7461 )
...
NODE-870
2023-10-18 21:52:15 +02:00
github-actions[bot]
ef58a23d21
🚀 Release 1.12.0 ( #7459 )
...
# [1.12.0](https://github.com/n8n-io/n8n/compare/n8n@1.11.0...n8n@1.12.0 )
(2023-10-18)
### Bug Fixes
* **core:** Add check that queue is defined and remove cyclic dependency
([#7404 ](https://github.com/n8n-io/n8n/issues/7404 ))
([45f2ef345f2ef373e#7411 ](https://github.com/n8n-io/n8n/issues/7411 ))
([2b6a15e2b6a15e478#7424 ](https://github.com/n8n-io/n8n/issues/7424 ))
([ec14141ec141416e2#7368 ](https://github.com/n8n-io/n8n/issues/7368 ))
([2f4d91b2f4d91b2cd#7417 ](https://github.com/n8n-io/n8n/issues/7417 ))
([770390477039044eb#7435 ](https://github.com/n8n-io/n8n/issues/7435 ))
([e01b9e5e01b9e5ae1#7419 ](https://github.com/n8n-io/n8n/issues/7419 ))
([46977a246977a2aff#7320 ](https://github.com/n8n-io/n8n/issues/7320 ))
([367255a367255ab2c#7377 ](https://github.com/n8n-io/n8n/issues/7377 ))
([c599006c599006b91#7357 ](https://github.com/n8n-io/n8n/issues/7357 ))
([d8531a5d8531a53b9#7432 ](https://github.com/n8n-io/n8n/issues/7432 ))
([c3f0be8c3f0be809f#7416 ](https://github.com/n8n-io/n8n/issues/7416 ))
([e9b6ab0e9b6ab04cd#7450 ](https://github.com/n8n-io/n8n/issues/7450 ))
([a2d2e3da2d2e3dda7#7439 ](https://github.com/n8n-io/n8n/issues/7439 ))
([40707fa40707fa692#7436 ](https://github.com/n8n-io/n8n/issues/7436 ))
([9d241a09d241a0d6d#7156 ](https://github.com/n8n-io/n8n/issues/7156 ))
([57c609357c609384a#7130 ](https://github.com/n8n-io/n8n/issues/7130 ))
([3ddc1763ddc176dfa#7448 ](https://github.com/n8n-io/n8n/issues/7448 ))
([79f23fb79f23fb939
2023-10-18 17:43:29 +02:00
Iván Ovejero
40707fa692
feat(core): Make executions pruning interval configurable ( #7439 )
2023-10-18 17:01:57 +02:00
Michael Kret
3ddc176dfa
feat(n8n Form Trigger Node): New node ( #7130 )
...
Github issue / Community forum post (link here to close automatically):
based on https://github.com/joffcom/n8n-nodes-form-trigger
---------
Co-authored-by: Giulio Andreini <g.andreini@gmail.com>
2023-10-17 07:09:30 +03:00
Michael Auerswald
e01b9e5ae1
fix(core): Prevent false stalled jobs in queue mode from displaying as errored ( #7435 )
...
This is related to an issue with how Bull handles stalled jobs, see
https://github.com/OptimalBits/bull/issues/1415 for reference.
CPU intensive workflows can in certain cases take a long while to finish
up, thereby blocking the thread and causing Bull queue to think the job
has stalled, even though it finished successfully. In these cases the
error handling could then overwrite the successful execution data with
the error message.
2023-10-13 16:07:08 +02:00
Iván Ovejero
c6ee1e30c0
refactor(core): Add binary data S3 to telemetry ( #7412 )
...
https://n8nio.slack.com/archives/C04B1GZ4T0U/p1697033523039729
2023-10-13 13:16:43 +02:00
Michael Auerswald
45f2ef373e
fix(core): Add check that queue is defined and remove cyclic dependency ( #7404 )
...
In a rare edge case an undefined queue could be returned - this should
not happen and now an error is thrown.
Also using the opportunity to remove a cyclic dependency from the Queue.
2023-10-13 11:53:59 +02:00
